• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.459-462
• /
• 2006

스트랩다운 관성항법장치에 사용되는 대표적인 광학식 자이로인 링레이저 자이로(Ring Laser Gyro ; RLG)는 회전체가 없어 기존의 기계식 자이로가 가지고 있던 g-sensitive 오차가 발생하지 않지만 RLG 내부에 부착되어 링레이저를 반사시키는 기능을 하는 반사경의 산란에 의해 일정 크기의 작은 입력 각속도를 측정하지 못하는 lock-in이 발생한다. 이러한 lock-in을 제거하기 위해 정현파 진동을 RLG 몸체에 인가하며 이 진동에 의하여 자이로 출력에 랜덤워크 성분이 유발되어 RLG 성능저하의 원인이 된다. 본 논문에서는 RLG 랜덤워크에 의한 관성항법장치의 초기정렬 기법에 따른 초기정렬 성능을 분석하고 이에 대한 시뮬레이션 결과를 제시한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.368-371
• /
• 2009

The GALILEO Project is to be the one and only European Global Navigation Satellite System(GNSS). The GIVE-B satellite, a second experimental GALILEO satellite was launched and started the transmission of ranging signals. GIOVE-B satellite is intended as a trueprototype of future GALILEO satellite. So I introduce the standard deviation of code multi path, signal power, antennas performance and L1-E5 group delay etc. Therefore I comprehend the current progress and tend of GALILEO Project and try to propose the national countremeasures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.163-164
• /
• 2014

Pseudolite systems are used for backup systems of GPS satellite or indoor navigation systems. The pseudolite transmits GPS-like signal on the ground. Fundamentally, to estimate a position, clock synchronization among satellites is essential, because GPS receiver uses measurement based on TOA. Therefore, in order to improve the navigation performance in applications using pseudolite, clock synchronization with GPS satellites is required. This paper proposes design of monitoring system for pseudolite clock synchronization. The monitoring system analyzes clock synchronization accuracy of pseudolite and can be used for clock adjustment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.235-242
• /
• 1998

This study aims to detect and to reduce the multipath errors which are main errors source in high precious surveying such as GPS-aided aerial triangulation and Car Navigation. which reference receivers being fixed, when kinematic receivers move continuously, multipath is performed using smoothed code measurement and pure code measurement in the network. Through this methods, 3D RMS errors are reduced into about 30% in the single differential code solution to the kinematic receiver. This is based on the fact that the network adjustment are performed at multiple reference receivers, but positioning is carried out by the single differential methods between a reference receiver and a kinematic receiver. So it was supposed that this methods reduced the correlation errors including the atmospheric errors using the nearest receivers and can be mixed with another methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.47-56
• /
• 2005

In GPS/INS/barometer navigation system for UAV, vertical channel damping loop was introduced to suppress divergence of the vertical axis error of INS, which could be reduced to the level of accuracy of pressure altitude measured by a pitot-static tube. Because static pressure measured by the pitot-static tube depends on the speed and attitude of the vehicle, static pressure error models, based on aerodynamic data from wind tunnel test, CFD analysis, and flight test, were applied to reduce the error of pressure altitude. Through flight tests and sensitivity analyses, the error model using the ratio of differential pressure and static pressure turned out to be superior to the model using only differential pressure, especially in case of high altitude flight. Both models were proposed to compensate the effect of vehicle speed change and used differential and static pressure which could be obtained directly from the output of pressure transducer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.566-573
• /
• 2019

In order to obtain high-quality images by motion compensation in the airborne synthetic aperture radar (SAR), accurate motion sensing in image acquisition section is necessary. Especially, reducing relative position error and discontinuity in motion sensing is important. To overcome the problem, we propose a pre-parametric error modeling (P-PEM) algorithm which is a real-time motion sensing algorithm for the airborne SAR in this paper. P-PEM is an extended version of parametric error modeling (PEM) method which is a motion sensing algorithm to mitigate the errors in the previous work. PEM estimates polynomial coefficients of INS error which can be assumed as a polynomial in the short term. Otherwise, P-PEM estimates polynomial coefficients in advance and uses at image acquisition section. Simulation results show that the P-PEM reduces relative position error and discontinuity effectively in real-time.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.429-436
• /
• 2019

The eLoran system is considered the best alternative because the vulnerability of satellite navigation systems cannot be resolved as perfect. Thus, South Korea is in the process of establishing a testbed of the eLoran system in the West Sea. To provide resilient navigation services to all waters, additional eLoran transmitters are required. However, it is difficult to establish eLoran transmitters because of various practical reasons. Instead, the positioning with NDGNSS/AIS source can expand the coverage and its algorithm with applying continuous waves is under development. Using the already operating NDGNSS reference station and the AIS base station, it is possible to operate the navigation system with higher accuracy than before. Thus, it is crucial to predict the performance when each system is integrated. In this paper, we have developed a simulation tool that can predict the performance of terrestrial integrated navigation system using the eLoran system, maritime NDGNSS station and the AIS station. The esitmated phase error of the received signal is calculated with the Cramer-Rao Lower Bound factoring the transmission power and the atmospheric noise according to the transmission frequency distributed by the ITU. Additionally, the simulation results are more accurate by estimating the annual mean atmospheric noise of the 300 kHz signal through the DGPS signal information collected from the maritime NDGNSS station. This approach can further increase the reliability of simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.425-428
• /
• 2008

To overcome the limitation of tracking speed on signal-shaded area and the discontinuity of GPS, we present a system which estimates the speed of moving object using GPS and accelerometer. This system is designed to correct accelerometer's noises which are caused by vibration and impact to the object and errors of itself, from the navigation information of GPS receiver and accelerometer which are installed to moving object. And using this information, it estimates the speed of moving object on GPS signal-shaded area to complement discontinuity of GPS navigation information. We designed Kalman Filter structure using GPS and accelerometer to apply this system, and verify that the system can estimate object's speed on GPS signal-shaded area. Finally, we present the possibilities applying to telematics systems like automatic navigation system.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.72-77
• /
• 2017

The Satellite Based Augmentation System (SBAS) broadcasts to users integrity and correction information for Global Navigation Satellite System (GNSS) such as GPS and GLONASS using geostationary orbit (GEO) satellites. In accordance with the recommendation of the International Civilian Aeronautical Organization (ICAO) to introduce SBAS until 2025, a Korean SBAS system development / construction project is underway with the Ministry of Land, Transport and Maritime Affairs. Korea Augmentation Satellite System (KASS) is a high precision GPS correction system which is composed of KASS Reference Station (KRS), KASS Processing Station (KPS), KASS Uplink Station (KUS), KASS Control Station (KCS) and GEO satellites. In this paper, we provided the conceptual design of the KASS uplink station, which is composed of the Signal Generator Section (SGS) and the Radio-Frequency Section (RFS), and interface between the KASS ground sector and the GEO satellite.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1055-1062
• /
• 2015

A GPS based wave height meter system is proposed in this paper. The proposed system uses a dual-frequency measurements, a precise GPS satellite information and a PPP-based navigation algorithm to estimate the position with high accuracy. This method does not need to receive corrections from the reference stations. Therefore, unlike RTK based wave meter, regardless of the distance to the reference stations, it is possible to estimate position with high accuracy. This system is very simple and accurate system, but accelerometer-based system requires the other sensors such as GPS. Because position error is accumulated in the accelerometer system and must be removed periodically for high accuracy. In order to get the measurements and test the proposed wave height meter system, a buoy equipped with the test platform is installed on the sea near by Jukbyeon habor in Uljin, Korea. Then, to evaluate the performance, compares built-in commercial wave height meter with proposed system.