• Journal of Environmental Science International
• /
• v.31 no.6
• /
• pp.515-524
• /
• 2022

This study investigated characteristics of meteorological parameters and ionic components of PM_2.5 during Asian dust events on November 28 and 30, 2018 at Busan, Korea. The seasonal occurrence frequencies of Asian dust during 1960~2019 (60 years) were 81.7% in spring, 12.2% in winter, and 6.1% in autumn. Recently, autumn Asian dust occurrence in Busan has shown an increasing trend. The result of AWS (automatic weather station), surface weather chart, and backward trajectory analyses showed that the first Asian dust of Nov. 28, 2018, in Busan came with rapid speed through inner China and Bohai Bay from Mongolia. The second Asian dust of Nov. 30, 2018, in Busan seems to have resulted from advection and deposition of proximal residual materials. These results indicated that understanding the characteristics of meteorological parameters and ionic components of PM_2.5 during Asian dust events could provide insights into establishing a control strategy for urban air quality.

• Journal of Environmental Science International
• /
• v.32 no.1
• /
• pp.37-46
• /
• 2023

This study investigated the effect of May 31, 2022 Miryang wildfire on fine particle concentrations in Busan and Gimhae, which are neighboring urban areas. In addition, fine particle characteristics and air pollution concentrations were investigated in Miryang, where haze occurred. The Miryang city wildfire that occurred on May 31, 2022, at 0925 LST, was driven by strong north winds and increased fine particle concentrations in Dongsangdong and Jangyoodong, Gimhae City, which are approximately 35 km to the southeast and south, respectively, of the wildfire occurrence site. Furthermore, the fine particle concentration in Myeongjidong, which is approximately 50 km south-southeast of the wildfire site, exhibited a temporary increase at 1400 LST owing to the effects of wildfire smoke. On the morning of June 1, the day after the fire, the Miryang area had very bad visibility because of the smoke from the fire. Therefore the PM₁₀ and PM_2.5 concentrations in Naeildong, 3 km south of the wildfire site, were 276 ㎍/㎥ and 222 ㎍/㎥, respectively, at 1200 LST. In addition, the gases O₃, CO, and SO₂ showed high concentrations at the time of haze generation. This study provides insights into policy making in response to the rapid increase in fine dust when wildfire occurs near cities.

• Journal of Information Technology Applications and Management
• /
• v.30 no.6
• /
• pp.17-29
• /
• 2023

In this paper, we aim to propose cyber security considerations and countermeasures for infrastructure and services in the UAM(Urban Air Mobility) Air Traffic Management field, which is one of the key elements of the UAM market that has not yet bloomed. Air traffic management is an important factor for safe navigation and social acceptance of UAM. In order to realize air traffic management, infrastructure and services based on solid network connectivity must be established. And for industries where connectivity is the core component, it can become an infiltration route for cyber threats. Therefore, cyber security is essential for the infrastructure and services. In detail, we will look into the definition of the existing air traffic management field and the cyber threats. In addition, we intend to identify cyber security threat scenarios that may occur in the newly designed UAM air traffic management infrastructure. Moreover, in order to study the cyber security countermeasures of the UAM air traffic management infrastructure, there will be analysis of the UAM operation concept. As a result, countermeasures applicable to the infrastructure and service fields will be suggested by referring to the cyber security frameworks.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.251-261
• /
• 2022

This paper describes the finite element analysis and die design change of spring retainer forging process to reduce the cold forging load and plastic forming stress concentration. Plastic deformation analysis was carried out in order to understand the forming process of workpieces and elastic stress analysis of the die set was performed in order to get basic data for the die fatigue life estimation. Cold forging die design was set up to each process with different four types analysis progressing, the upper and lower dies shapes with combination of fillets and chamfers shapes of cold forging dies. This study suggested optimal cold forging die geometry to reduce cold forging load. The design parameters of fillets and chamfers are selected geometry were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the workpiece preform shape for spring retainer forging process, it was possible to expect an increase in cold forging die life due to the 20 percentage forging load reduction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.216-225
• /
• 2023

This paper describes the finite element analysis and die design change of cold heading punching process to increase the cold forging tool life and reduce the tool wear and stress concentration. Through this study, the optimization of punch tool design has been studied by an analysis of tool stress and wear distribution to improve the tool life. Plastic deformation analysis was carried out in order to understand the cold heading process between tool and workpiece stress distribution. Cold heading punch die design was set up to each process with different four types analysis progressing, the cold heading punch dies shapes with combination of point angle and punch edge corner radius shapes of cold forging dies, punch die material properties and frictional coefficient. The design parameters of point angle and corner radius of punch die geometry, die material properties and frictional coefficient were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the cold heading punch die design parameters optimization for bolt head cold forging process, it was possible to expect an reduce the cold heading punch die wear to the 37 % compared with current using cold heading punch in the shop floor.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.3-20
• /
• 2022

Recently, prior to the commercialization of urban air mobility (UAM), the importance of R&D for air transportation-related industries in urban areas has significantly increased. To create a UAM environment, research is being conducted on personal air vehicles (PAVs). They are key means of air transportation, but research on the physical factors influencing their passengers is relatively insufficient. In particular, because the PAV is expected to be used as a living space for the passengers, research on the effects of the physical elements generated in the PAV on the human body is essential to design an interior space that supports the in-vehicle activities of the passengers. Therefore, the purpose of this study is to derive the constraint factors that affect the human body due to the air navigation characteristics of the PAV and to understand the impact of these constraint factors on the bodies of the passengers performing in-vehicle activities. The results of this study indicate that when the PAV was operated at less than 4,000 ft, which is the operating standard, the constraint factors were noise, vibration, and motion sickness caused by low-frequency motion. These constraint factors affect in-vehicle activity; thus, the in-vehicle activities that can be performed in a PAV were derived using autonomous cars, airplanes, and PAV concept cases. Furthermore, considering the impact of the constraint factors and their levels on the human body, recommended constraint factor criteria to support in-vehicle activities were established. To reduce the level of impact of the constraint factors on the human body and to support in-vehicle activity, the seat's shape and built-in functions of the seat (vibration reduction function, temperature control, LED lighting, etc.) and external noise reduction using a directional speaker for each individual seat were recommended. Moreover, it was suggested that interior materials for noise and vibration reduction should be used in the design of the interior space. The contributions of this study are the determination of the constraint factors affecting the in-vehicle PAV activity and the confirmation of the level of impact of the factors on the human body; in the future, these findings can be used as basic data for suitable PAV interior design.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.186-186
• /
• 2010

최근 들어, 2차원/3차원의 랩 또는 항공/위성 영상의 공간정보를 웹 상에서 서비스 하고 이러한 공간정보에 다양한 정보들을 융 복합하여 사용자들에게 보다 높은 수준의 정보를 제공하기 위한 기술개발에 대한 관심이 급증하고 있다. 예를들어, Microsoft사의 경우는 사용자 참여형(Participatory) 센서 웹 환경을 구축하기 위하여 SenseWeb 관련 기술 개발 및 시범 프로젝트를 수행하고 있는데, SenseWeb 시스템에서는 전 세계에 존재하는 모든 센서들을 연계하여 웹 상에서 사용자들에게 제공할 수 있도록 하는 것을 목표로 하고 있다. 최근에는, 이러한 SenseWeb 시스템을 이용하여 센싱정보와 Bing Map의 공간정보를 융합하여 사용자에게 서비스를 제공할 수 있는 SensorMap 시스템이 개발되었는데, 이러한 SensorWeb/SensorMap 시스템을 기반으로 다양한 시범 프로젝트들이 진행되어 오고 있다. Google사의 경우는 기존에 서비스 되고 Google Eearth/Map을 기반으로 실시간 센싱정보를 연계하여 제공하는 서비스와 다양한 사용자들의 정보들을 테이블 형태로 연계 및 융합하여 제공하기 위한 Google Fusion Tables 서비스를 제공하고 있다. Oracle사의 경우는 센싱정보를 포함하여 실시간으로 끊임없이 변화하는 정보들에 대하여 이벤트 처리, 패턴 분석, 그리고 상황인식 등의 서비스를 제공할 수 있는 CEP(Complex Event Processing) 제품을 선보이고 있다. Nokia사의 경우는 기존의 고정 센서노드들 이외에 모든 모바일 폰을 이동이 가능한 센서노드로 가정하고 이러한 모바일 센서노드들로부터 교통정보를 포함하는 다양한 센싱정보를 수집하고 분석하여 공간정보 기반으로 서비스하기 위한 기술 개발을 꾸준히 추진해 오고 있다. 본 발표에서는 이러한 공간정보와 센싱정보 또는 기타 사용자 정보와의 융 복합서비스를 가능하게 하는 핵심기술들에 대하여 소개하고자 한다. 첫째로 다양한 공간정보와 센싱정보의 융 복합 및 분석 서비스를 제공할 수 있는 u-GIS 융합 엔진에 대하여 설명하고자 한다. u-GIS 융합 엔진에서는 구체적으로 최근 이슈가 되고 있는 다양한 센싱정보의 효율적 수집, 분석, 관리를 위한 GeoSensor 데이터 저장/관리 기술과 센싱정보-공간정보의 실시간 융합 분석 기술에 대해서 소개를 하고자 한다. 둘째로, 이러한 공간정보, 센싱정보 그리고 기타 사용자 정보들을 웹 상에서 효율적으로 매쉬업하여 2차원 및 3차원으로 사용자에게 제공하기 위한 맞춤형 국토정보 제공 기술에 대하여 설명하고자 한다. 여기서는 공간정보 센싱정보 그리고 기타 사용자 정보와의 연계를 위한 매쉬업 엔진 기술 그리고 실시간 3차원 공간정보 제공 기술 등에 대하여 소개를 하고자 한다. 끝으로, 영상 기반의 효율적인 공간정보 구축을 위한 멀티센서 데이터 처리 기술에 대하여 간략히 소개를 하고, 앞에서 설명된 핵심기술들 이외에도 향후 추가로 요구되는 기술개발 내용에 대하여 간략히 설명을 하고자 한다.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1071-1082
• /
• 2002

Recent development in wireless computing and GPS technology cause the active development in the application system of location information in real-time environment such as transportation vehicle management, air traffic control and location based system. Especially, study about vehicle location tracking system, which monitors the vehicle's position in a control center, is appeared to be a representative application system. However, the current vehicle location tracking system can not provide vehicle position information that is not stored in a database at a specific time to users. We designed a vehicle location tracking system that could track vehicle location using mobile interface such as PDA. The proposed system consist of a vehicle location retrieving server and a mobile interface. It is provide not only the moving vehicle's current location but also the position at a past and future time which is not stored in database for users.

• Journal of Environmental Science International
• /
• v.31 no.6
• /
• pp.503-513
• /
• 2022

This research investigated the effect of the eruption of Japan Sakurajima volcano on the concentration of ultrafine particle when the north Pacific high pressure exists in the Busan in summer. As a result of analyzing the forward trajectory using the HYSPLIT model, the air parcel from Sakurajima volcano passed through the sea in front of Busan at 1500 LST on July 17, 24 hours after the volcanic eruption. As a result of analyzing the PM₁₀ and PM_2.5 concentrations in the Busan for two days from July 16 to 17, 2018, the Sakurajima eruption in Japan, it can be seen that there was a high increase in PM₁₀ and PM_2.5 concentrations compared to the previous day. As a result of analyzing the backward trajectory, the air mass that reached Busan at 1300 LST on July 17, 2018 has moved near the Sakurajima volcano at 1,500 m, 2,000 m, and 3,000 m. The concentration of SO₄^2- in PM_2.5, the concentration of all three stations in Busan showed a sharp increase from 1000 LST on July 17th. Looking at the NH₄⁺ concentration in PM_2.5, it shows a very similar variation trend to SO₄^2-, and the correlation coefficient between the two components is 0.96 for Jangrimdong and Yeonsandong, and 0.85 for Busan New Port. Looking at the NO₃^- concentration in PM_2.5, the same high concentrations as SO₄² and NH₄⁺ were not observed in the afternoon of July 17th.

• Journal of Environmental Science International
• /
• v.31 no.12
• /
• pp.1069-1078
• /
• 2022

This study investigated the weather conditions, fine particle concentration, and ion components in PM_2.5 when two cold fronts passed through Busan in succession on February 1 and 2, 2021. A analysis of the surface weather chart, AWS, and backward trajectory revealed that the first cold front passed through the Busan at 0900 LST on February 1, 2021, with the second cold front arriving at 0100 LST on February 2, 2021. According to the PM₁₀ concentration of the KMA, the timing of the cold front passage had a close relationship with the occurrence of the highest concentration of fine particles. The transport time of the cold front from Baengnyeongdo to Mt. Gudeok was approximately 11 hours . The PM₁₀ and PM_2.5 concentrations in Busan started to increase after the first cold front had passed, and the maximum concentration occurred two hours after the second cold front passed. The SO₄^2-, NO₃^-, and NH₄⁺ concentration in PM_2.5 started to increase from 1100 to 1200 LST on February 1, after the first cold front passed, and peaked at 0100 LST to 0300 LST on February 2. However, the highest Ca²⁺ concentration was recorded 2-3 hours after the second cold front had passed.