• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.177-186
• /
• 2009

Nowadays, as going to information society based knowledge, the informations are acquired, processed, serviced based digital environment. In surveying field, the trend have been changed from the analog foundation to the digital foundation. Also, aerial photogrammetry is being changed from analog aerial photogrammetry to digital aerial photogrammetry. In this paper, the analysis of accuracy is performed for the comparison of traditional aerial photogrammetry with digital aerial photogrammetry usign UltracamX in AT and Block Adjustment. As the results, Bundle adjustment in digital aerial photogrammetry with GPS/INS have more advantages than traditional independent adjustment in analog aerial photogrammetry. Digital aerial photogrammetry contributes the higher accuracy in AT and block adjustment more than analog aerial photogrammetry.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.423-427
• /
• 2010

현재 GPS/INS 운영 방법은 일정한 범위 내에 GPS 지상기준국을 설치하도록 되어있다. 그러나 촬영지역이 넓을 경우나 작업의 우선순위 등에 따라 지상기준국의 운영이 곤란한 상황이 발생할 수 있으며, 작업자의 실수, 수신기의 오류 등으로 지상기준국을 항상 안정적으로 운영하기 어렵다. 이에 본 연구에서는 국토지리정보원의 GPS 상시관측소를 활용하여 항공레이저측량 원시자료를 구축하고, 지상 기준국을 사용한 결과와의 비교를 통해 기준국이 항공레이저측량 결과에 미치는 영향을 분석하고자하였다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 1999.06a
• /
• pp.217-228
• /
• 1999

최근 범국가적인 GIS구축사업을 위한 효율적인 지형공간정보취득기법에 대한 요구가 날로 증가하고 있다. 이는 HW, SW 및 데이터로 구성되는 GIS구축에서 지형자료가 차지하는 비중과 이의 취득에 필요한 노력이 매우 중요함을 반증하고 있다. 이에 부응하여 국내에서도 재래식측량기법의 자동화/현대화에서부터 GPS측량기술의 도입, Airborne-항공사진측량기법의 개발 및 고해상도위성영상의 활용방안에 이르기까지 새로운 측량기술에 대한 다양한 연구와 기술축적을 서두르고 있는 실정이다. 그러나 위의 어떠한 측량기법도 단독으로는 정확도, 신속성, 경제성, 현재성 등 GIS 자료취득의 모든 요구조건을 만족하는 Total Solution이 되지 못하고 있다. 따라서 본 연구에서는 매핑과 GIS-자료취득에 활용되고 있는 여러 가지 항공측량기술의 현황과 장단점을 살펴보았다. 또한 위성에 의한 위치결정시스템인 GPS와 관성항행장치인 INS를 결합하여 항공측량 분야에 필요한 센서의 위치와 회전각을 결정하므로서 시너지(Synergy)효과를 높이는 기법을 소개한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.383-383
• /
• 2015

하천의 하상고 측량은 하상변동 분석, 서식처 구조 등을 이해하는데 매우 중요한 정보를 제공한다. 하지만, 현재까지 대부분의 하상고 측량은 일정한 간격의 하천 단면 측량에 의해서 행해져 왔다. 최근 GPS와 다중 빔 측심기를 이용하여 하상의 3차원적 형상을 조밀하게 측량하고 있으나 비용이 많이 들기 때문에 긴 하천 구간을 전부 측량하지는 못하고 특정한 부분에 대해서만 집중하고 있다. 항공 LiDAR의 경우 넓은 지역에 대해 신속하고 고해상도로 지형을 측량할 수 있으나 수중 투과 장비가 고가이며, 일반 적색 레이져 기반 LiDAR는 수중을 측정하지 못하여 하상 측량에 한계가 있다. 이에 대한 대안으로 활용할 수 있는 방법은 광학 기반의 원격 탐사에 의한 수심 측량 방법이다. 이 방법은 얕은 수심의 하천에 대한 활용되었는데, 광학 센서 이미지나 항공사진 등을 이용한다. 본 연구에서는 저고도에서 촬영한 고해상도 디지털 항공사진을 이용하여 모래하천의 수심을 추정하였다. 이 방법은 항공사진의 적색 및 녹색 색상값과 현장에서 정밀한 측위 하에 측량한 수심값 사이의 관계를 이용한다. 이를 통해 보정식을 수립하고 검사 자료를 이용하여 검증한 후 항공사진의 해당 지역에 대해 수심 부분을 마스킹 처리하여 하상고를 구축하였다. 검사 자료에 대한 RMSE는 약 12 cm로 나타났다. 이를 활용하여 대상 구간의 3차원적 지형 형상을 구축하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.743-750
• /
• 2009

Since aerial photogrammetry by analog camera began in 1972, recently, high resolution digital camera is actively introduced to improve efficiency of aerial photogrammetry. This study investigated the 3D positioning accuracy of DMC(Digital Mapping Camera) among various high resolution aerial digital cameras to be developed for photogrammetry. For the research, we installed control points in test field around Incheon, and acquired analog and digital aerial photographs. By comparing 3D positioning accuracies of analog and digital photographs, there are few difference between two cameras, and the 3D positioning accuracies of two cameras was somewhat increased in case of aerotriangulation using additional control points based on GPS/IMU EO data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.37-44
• /
• 2006

To use surveying data obtained from different sensors and different techniques, it is a pre-requite step that register them in a common coordinate system. For this purpose, we developed methodologies to register airborne photos, ALS (Airborne Laser Scanning) data and digital maps. To achieve this, conjugate features from these data should be extracted in advance. In this study, linear features are chosen as conjugate features. Based on such a selection strategy, a simple and robust algorithm is proposed for extracting such features from ALS data. Then, to register them, observation equations are established from similarity measurements of the extracted features and the results was evaluated statistically. The results clearly demonstrate that the proposed algorithms are appropriate to register these data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.155-166
• /
• 2017

As the utilization of aerial images increases, a variety of software using unmanned aerial photogrammetric procedures as well as traditional aerial photogrammetric procedures are being provided. Previously, software that used the unmanned aerial photogrammetric procedure was used for images captured in small areas. Recently, however, software that uses unmanned aerial photogrammetric procedures for large-scale images taken by using aerial photogrammetric cameras has appeared. Therefore, this study generated ortho-images using aerial photogrammetry and unmanned aerial photogrammetry for large aerial images, and compared the features of both procedures through qualitative and quantitative comparisons. Experiments in the study area show that using the 3D mesh effectively removes the relief displacement of the building rather than using the digital surface model to generate ortho-images.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.8
• /
• pp.577-584
• /
• 2016

UAV(Unmaned Aerial Vehicle), which is autonomous flight without pilots. Recently, UAV is being applied to various fields such as video recording, aerial photogrammetry. In particular, UAV is getting a lot of attention in the field of space-related information because of it's data acquisition speed and economic feasibility. But analytical study of an unmanned air-side technologies are lacking. In this study, the research of equipment for the unmanned aerial surveys and UAV technologies and trend analysis for generation of terrain model and ortho image effectively were performed. As a result, the ways to improve the utilization field of unmanned aerial surveying and processing of fixed-wing and rotary-wing unmanned aircraft. were suggested. If analytical research on generation of terrain models and ortho image will be performed, production efficiency of the geospatial information industry is expected to be significantly increased.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.89-95
• /
• 1996

As an attempt to apply GPS technique to aerial photogrammetry, an effort is exerted to replace the ground control points that were necessary in the traditional aerial photogrammetry with the aerial control by measuring the position of the camera exposure. In this study, various situations are simulated to test the conditions that affect the positioning of the points in aerial photogrammetry for the use of GPS data. From the result of the simulations, the necessary conditions and the applicable values to produce a 1:1, 000 topographical map were suggested. In the case of a photo block consists of 104 photos, we found a minimum of six ground control points make acceptable accuracy under the condition of below $10\mu{m}$ image positional error and with the ground observations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.337-345
• /
• 2010

In general, Digital Photogrammetry is based on independent workstation system, which is costly and has complex process. In this research, a new approach method regarding Digital Photogrammetry procedure is suggested using Web Processing Service, which is a GIS standard proposed by Open Geospatial Consortium. For the experiment, many Generic Processes were defined through WPS profiling procedure which defines standard unit for Photogrammetry, and with the defined process each server and client S/W module was implemented based on WPS standards. In this paper, many users can be expected to share and reuse unit process in WPS server through the web.