• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.194-194
• /
• 2011

현대 사회에서 차량을 비롯한 선박, 항공기와 같은 각종 수송수단들은 그 용도와 형태도 다양하고 널리 보급되어있을 뿐만 아니라 각 분야에서 없어서는 안 될 필수품이 되어 있다. 그러나 수송수단의 수와 활용빈도수가 증가함에 따라 그로 인한 차량화재, 선박화재 그리고 항공기화재 등과 같은 특수화재의 발생에 따른 재산 및 인명피해의 문제점들도 함께 늘어나고 있는 실정이다. 2009년 기준, 1년 동안의 전체 화재발생건수 47,071건 가운데 차량화재의 발생건수가 5,958건으로서 전체의 12.6% 정도를 차지하였다. 그뿐만 아니라 차량 내장재의 주 재질은 가연성을 지닌 열가소성 합성수지들로서 화재가 발생하였을 경우, 다량의 가연성 가스 및 독성가스를 방출하기 때문에 인명 및 재산 피해를 증가시키는 문제점을 갖고 있다. 하지만 아직까지도 이와 같은 수송수단에 대한 화재를 예방하거나 피해를 최소화할 수 있는 화재진압대책 등에 관한 연구는 미흡한 실정이다. 따라서 본 연구에서는 이러한 문제점을 해결하고 과학적이며 체계적인 대응방안을 수립하기 위한 기초 자료를 확보하고 이를 통한 수송수단의 화재안전성을 분석하고자 각종 수송수단에서 사용되는 오일을 대상으로 연소특성 분석 및 화재하중에 관한 연구를 수행하였다. 분석 대상 오일은 연료용과 부속용 오일로 크게 분류되며, 연료용 오일로는 차량용 경유와 휘발유 그리고 군용차량용 경유, 항공기용 백등유와 제트유, 선박용 고유황경유 등을 선정하였다. 부속용 오일로는 브레이크오일, 파워오일, 엔진오일, 자동변속기오일, 수동변속기오일을 대상으로 각각 일반용과 고급형 2가지씩 시료를 선정하여 분석을 수행하였다. 분석방법은 대상오일들의 기초물성을 고찰하기 위해서 비중계를 이용하여 각 시료들의 비중을 측정하였으며, 문헌으로부터 끓는점, 어는점 및 점도 등을 조사하였다. 또한, 대상오일들의 착화특성을 살펴보고자 콘칼로리미터와 인화점 측정기 및 발화점 측정기 등을 이용하여 발열량, 착화시간, 발연량, 발화점, 인화점 등을 측정하였다. 대상오일들의 물성 및 착화특성에 대한 측정결과를 살펴보면, 비중은 $725.8{\sim}1072.0kg/m^3$ 정도의 값을 나타냈고, 인화점은 영하의 인화점을 갖는 휘발유의 경우, 장비의 특성상 분석이 곤란하여 측정하지 못하였으며, 다른 시료들은 $45.3{\sim}266.6^{\circ}C$정도의 값을 나타냈다. 발화점은 $325.7{\sim}600.6^{\circ}C$정도의 값을 갖는 것으로 나타났다. 따라서 이와 같은 결과들을 활용하면 차량, 선박, 항공기 등에 대한 화재발생과 관련된 화재안전성을 분석하고 이를 통한 수송시스템의 화재에 대한 예방 및 대응 방안의 효율성을 높일 수 있을 것으로 생각된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.1-6
• /
• 2020

UAV (Unmanned Aerial Vehicles) are used widely for military purposes because they are more economical than general manned aircraft and satellites, and have easy access to the object. Recently, owing to the development of IT technology, UAV equipped with various sensors have been released, and their use is increasing in a wide range of fields, such as surveying, agriculture, meteorological observation, communication, broadcasting, and sports. An increasing number of studies and attempts have made use of it. On the other hand, existing research was related mostly to photogrammetry, but there has been a lack of analytical research on LiDAR (Light Detection And Ranging). Therefore, this study examined the characteristics of a UAV LiDAR sensor for the application of a geospatial information field. In this study, the performance of commercialized LiDAR sensors, such as the acquisition speed and the number of echoes, was investigated, and data acquisition and analysis were conducted by selecting Surveyor Ultra and VX15 models with similar accuracy and data acquisition distances. As a result, a DSM of each study site was generated for each sensor, and the characteristics of data density, precision, and acquisition of ground data from vegetation areas were presented through comparison. In addition, the UAV LiDAR sensor showed an accuracy of 0.03m ~ 0.05m. Hence, it is necessary to select equipment considering the characteristics of data for effective use. In the future, the use of UAV LiDAR may be suggested if additional data can be obtained and analyzed for various areas, such as urban areas and forest areas.

• Journal of Advanced Navigation Technology
• /
• v.3 no.2
• /
• pp.108-119
• /
• 1999

In recent, there has been remarkable progress in the field of GPS applications. In a few years, an appreciable number of aircraft will adopt GPS as a landing guidance system because GPS is more economic, more reliable and more accurate than any other aviation systems. In this respect, we have performed several helicopter landing flight tests based on the real-time DGPS system made in SNUGL (Seoul National University GPS Laboratory). From the experimental results, we found several problems Which should be fixed to adopt DGPS as a aircraft landing guidance system. In this paper, we will introduce the problems found in tests and also suggest modifications to solve the problems. Our modifications can be classified into three parts. The first is about the attitude determination with single GPS antenna. The second deals with the cockpit display module. The display was devised to integrate the Instrument Landing System(ILS) with tunnel-the-sky using virtual reality. With the display, pilot can achieve more safe landings. The last part is the digital map. We inserted digital map into our system and put direction indicator on the map using position information from GPS. It is very useful for pilot to find airports even in bad weather. Using the newly designed DGPS landing system, we conducted flight test at Kimhae International Airport, Pusan, Korea. It was successful! Our system can also satisfy Category-I criterion for aircraft landing approach and determine attitude angle with a high level of reliability. It is supported by video materials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.35-39
• /
• 1993

항공기의 플러터 현상을 예방키 위한 개발시의 주요 공학적 임무로는 플러 터 해석, 풍동 플러터 시험, 실기체에 대한 지상진동시험 및 비행 플러터 시 험이 있다. 이들 업무는 군용 항공기의 경우에는 군사 규격서, 민간 항공기 의 경우는 FAR 규정 등에 항공기 개발 및 개조시에는 필히 수행토록 명시 되어 있으며, 특히 개발항공기의 인증을 받기 위해서는 초도 비행전까지 필 수적으로 완료되어야 하는 업무이다. 이중 항공기 지상진동시험은 개발항공 기의 초도 비행전에 실기체를 대상으로 하는 구조 동특성 규명시험으로써 플러터 해석 모델의 정확도를 입증하고 그 해석모델을 수정하거나 개선시키 는데 필요한 구조의 동특성 변수들을 실험적으로 규명하는 시험이다. 이 시 험은 개발된 항공기의 초도비행허가를 획득하고 비행속도제한을 설정키 위 해서 초도비행 직전에 초도 개발 비행기를 대상으로 필수적으로 수행되어야 하는 필수적 시험이다. 이에 따라 개발된 항공기의 전기체 지상진동시험을 수행하였고, 시험데이터의 모달해석을 하였다. 이 시험을 수행하기 위해 3개 의 가진기를 사용하였고, 모두 159개의 지점에서 주파수응답 함수를 얻었다. 최대 48 채널의 데이터 획득시스템을 사용하였으므로, 네번에 걸쳐 측정위치 를 옮겨 전체데이타를 획득하였다. 지상진동 시험의 최종해석 결과는 유한요 소 모델의 유효성을 검토하는데 사용되었고, 시험 데이타를 이용한 가진응답 해석(Forced Response Analysis)을 통하여 비행플러터 시험시에 사용되는 플러터 가진기의 위치선정 및 가진력의 크기를 결정하는데 이용하였다.ncy)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.467-479
• /
• 1995

To investigate the current structures and diffusion characteristics in Youngil Bay, a systematic field observations of current velocity, drogue tracking, dye diffusion experiment and aerial photographing were performed. The flow patterns in the surface layer of the bay depend more strongly on the wind and ocean current than the tidal current, and the patterns in the middle are predominated by the ocean current. The residual currents in the surface generally flow toward the inner bay through the western and central areas of the bay, and then the currents go toward the ocean along the eastern shore of the bay with anti-clock-wise circulation. The residual currents in the surface of the eastern cease are not nearly influenced by the wind, and the currents always move northward to northeastward. However, the currents in the western shore depend strongly on the wind and the outflow of the Huntsman River, that is, the residual currents go northward to northeastward when the southerly to westerly winds blow or a large amount of flow from the river discharge. The residual currents in the middle layer flow toward the inner bay along the western shore of the bay, and the incomed currents go out to the ocean along the eastern shore with anticlockwise circulation. The diffusion of dye patch by the instantaneous point source shows a similar pattern to the drogue trajectory, and the apparent diffusion coefficients of the dye patch by Fick's theory is 1.14${\times}$10$^4$ cm$^2$/s. The behavior of the river discharges in flood shows a band type's effluent pattern toward the outer bay along the western coast.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.55-64
• /
• 2013

In this paper, the HILS (Hardware In-the-Loop Simulation) system to analyze and to verify the performance of the targeting pod is addressed. The main functions of the targeting pod is acquiring and tracking targets to guide a LGB (Laser Guided Bomb) to the targets. For the analysis of targeting pod, the real time simulate images generation of IR and daylight cameras, sever control technology, and the analysis of laser transfer characteristics are necessary. For the real time image generation and the laser transfer characteristics analysis, off-the-shelf SDK(Software Development Kit) OKTAL-SE is used. For the servo controller, well-proven mechanism in the previous program is applied to increase servo control accuracy. To analyze the performance of a targeting pod in a realistic environment, 1553B, ARINK818 interface and etc. which are actually implemented in real combat aircrafts are applied in the system. By using the developed HILS system, the performance of currently operating targeting pods in real combat aircrafts can be analyzed and predicted. Additionally, the relationship between overall system performance and each module performance can be analyzed, the currently developed HILS system is expected to be a very useful tool to generate system development requirements of targeting pods and to reduce any possible future development risks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.469-476
• /
• 2021

An electronic attack (EA) system is an essential weapon system for performing electronic warfare missions that contain signal tracking and jamming against multiple threats using electromagnetic waves, such as air defense radars, wireless command and communication networks, and guided missiles. The combat effectiveness can be maximized, and the survivability of militarily protecting combat power can be enhanced through EA mission operations, such as disabling the functions of multiple threats. The EA system can be used as a radio frequency jamming system to respond to drone attacks on the core infrastructure, such as airports, power plants, and communication broadcasting systems, in the civilian field. This study examined the criteria for classification according to the electronic attack missions of foreign EA systems based on an aviation platform. The foreign R&D trends by those criteria were investigated. Moreover, by analyzing the R&D trends of domestic EA systems and future battlefields in the domestic security environments, this paper proposes technological development plans of EA systems suitable for the future battlefield environments compared to the foreign R&D trends.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.60-66
• /
• 2020

Torrential rain causes landslide damage every year. In particular, the 2011 downpour caused landslides at numerous points throughout Mt. Woomyeon, which resulted in considerable damage to people and property. Because it occurred in an urban area, this case became a major social issue and received public attention. Measures were quickly implemented for multilateral investigations and recovery. Landslides caused by heavy rain are greatly affected by rainfall at the time. Landslides from the upper part erode the flow path, increasing the size, causing much damage to the lower part. This study selected a rural village area among the damaged areas of Mt. Woomyeon, and analyzed the change in terrain profile before and after a landslide using the DSM data obtained from airborne LiDAR. This area can be divided into three hydrological basins. For each basin, the analysis was performed on the average slope of each part of the flow path, as well as the erosion and deposition due to soil flow. As a result of the analysis, it was estimated that the total amount of soil from the Jeonwon village was 15,300㎥. These field data based on GIS can be used as basic information to predict damage in the case of a similar disaster, and it can be helpful in analyzing the results of various debris flow simulations.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.51-58
• /
• 2021

South Korea, as the 10th country to join the Artemis program led by NASA, is actively supporting various researches related to the lunar exploration. In particular, the utilization of water as a resource in the Moon has been focused since it was discovered that ice exists at the lunar pole as a form of frozen soil. Information on the thermal conductivity of lunar regolith can be used to estimate the existence for ice water extraction by thermal mining. In this study, the vacuum pressure effect on thermal conductivity of KLS-1 was investigated with a DTVC (Dusty Thermal Vacuum Chamber). The reliability of KLS-1 was reconfirmed through comparison with thermal conductivity of known standard lunar regolith simulants such as JSC-1A. An empirical equation to assess thermal conductivity considering dry unit weight and vacuum pressure was proposed. The results from this study can be implemented to simulate lunar cryogenic environment using the DTVC.