• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5A
• /
• pp.369-378
• /
• 2011

In this paper, the response analysis of RC(Reinforced Concrete), SC(Steel-Plate Concrete) containment buildings subjected to a large aircraft impact is performed using Autodyn-3D as Hydrocode. Until now, the impact load in the analysis of aircraft impacts has been applied to target structures at the local area by using the impact load-time history function of Riera. However in this paper, the results of aircraft crash are analyzed by using an aircraft model similar to Boeing 767 and verified by comparing the generated history of the aircraft crash against the rigid target with another history by using the Riera's function. To estimate the resistivity of the impact, the response and safety of SC containment buildings, this study is performed by comparing the four cases of plane concrete, reinforced concrete, bonded containment liner plate at reinforced concrete, and SC structure. Thus, the different behaviors between SC and RC structures when they are subjected to the extreme impact load could be anticipated. Consequently, the improved safety is expected by replacing RC structure with SC structure for nuclear power plants.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.715-722
• /
• 2011

In this paper, the behavior of nuclear-power plant subjected to an aircraft impact is performed using the parallel analysis. In the erstwhile study of an aircraft impact to the nuclear-power plant, it has been used that the impact load is applied at the local area by using the impact load-time history function of Riera, and the target structures have been restricted to the simple RC(Reinforced Concrete) walls or RC buildings. However, in this paper, the analysis of an aircraft impact is performed by using a real aircraft model similar to the Boeing 767 and a fictitious nuclear-power plant similar to the real structure, and an aircraft model is verified by comparing the generated history of the aircraft crash against the rigid target with another history by using the Riera's function which is allowable in the impact evaluation guide, NEI07-13(2009). Also, in general, it is required too much time for the hypervelocity impact analysis due to the contact problems between two or more adjacent physical bodies and the high nonlinearity causing dynamic large deformation, so there is a limitation with a single CPU alone to deal with these problems effectively. Therefore, in this paper, Message-Passing MIMD type of parallel analysis is performed by using self-constructed Linux-Cluster system to improve the computational efficiency, and in order to evaluate the parallel performance, the four cases of analysis, i.e. plain concrete, reinforced concrete, reinforced concrete with bonded containment liner plate, steel-plate concrete structure, are performed and discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.55-62
• /
• 2006

This thesis describes collision avoidance using fuzzy logic based on "Right of way" rules of ICAO and FAA and pilot's experiences for Unmanned Aerial Vehicle(UAV). To apply the rules, we designed fuzzy logic based collision avoidance system. And we also designed decision logic for enable condition of collision avoidance system. Decision logic have three kinds of core key, i.e. Relative Range, Time of CPA(Closest Point of Approach) and Distance at CPA. Application of decision logic made a possible to avoid NMAC(Near Mid-Air Collision) and it has been verified through several simulations. To conclude, we proposed the method to carry out "See and Avoid" ability on UAVs, which is capability to mingle with manned aircraft in civil airspace.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.969-974
• /
• 2021

South Korea is making efforts to select a drone industry, a type of unmanned aerial vehicle, as one of the 7 major industries in the country, to select a drone-specific liberalization zone and to establish and revise a drone-related bill. Through these efforts, drone delivery and drone taxis are expected to be operated in the future. Therefore, a multilateral collision avoidance system with existing aircraft such as drones, fixed-wing and rotary-wing should be established to prepare for possible drone and air-borne collisions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.33-39
• /
• 2006

In this paper, the collision avoidance of Unmanned Aerial Vehicles(UAVs) by applying the Traffic alert and Collision Avoidance System II(TCAS-II) is introduced. The performances of two UAVs whose maximum vertical rates are different each other are compared and analysed by not only converting many TCAS-II commands into an autopilot input but also implementing a computer program based on the Minimum Operational Performance Standards for TCAS-II. As the alternative to a possible Near Mid-Air Collision for UAVs whose maximum vertical rates are low, we have proposed a modified algorithm considering the maximum vertical rate and altitude. The modified algorithm is available on the assumption that a wider surveillance range is provided by a ADS-B system.

• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.70-79
• /
• 2019

The increase of bird strike requires to be amended more safely current airworthiness requirements for bird strike. The USA and Europe are considering the methodology to verify the bird strike requirements based on the finite element analysis (FEA). Meanwhile, the aircraft airworthiness standards in Korea enacted by the Ministry of Land, Infrastructure and Transport were based on those enacted by the Federal Aviation Administration (FAA). This means that the verification methods using the FEA for the bird strike requirements should be reflected in the airworthiness standards in Korea. Our study proposes the methodology for bird strike simulation based on the FEA for the external auxiliary fuel tank assembly on the Surion helicopters and confirmed that the numerical outputs corresponded to the test results. The authors suggest that the methodology and procedure based on the FEA are adopted not only in the bird strike requirements but in various aircraft certifications of civilian rotorcraft.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.10-10
• /
• 1998

본 연구에서는 제트 추진 기관의 터빈 익렬에서의 유동과 대기 중에 부유되어 있는 입자 또는 연소 생성물들이 제트엔진 내부로 유입될 경우 이에 따른 압축기 및 터빈 날개의 마모 및 충돌 부위를 예측하기 위하여 수치해석을 수행하였다. 일반적으로 각종 항공기의 추진 기관용 가스 터빈 엔진은 대기중에 부유되어 있는 각종 입자들의 영향을 받게 된다. 특히, 확산 지역을 통과하는 항공기나 먼지 입자 부유물이 많은 공업지대 또는 사막지역을 비행하는 항공기의 경우는 모래 알갱이, 먼지 및 연소 입자의 직접적인 영향을 받아 각 요소들에 심각한 부식 및 마모가 발생됨으로써 성능 저하 및 냉각 통로의 막힘, 압축기와 터빈 날개의 손상 등이 예측되어진다. 특히 항공기용 추진 기관은 엔진 입구에 유입 공기를 정화하기 위한 여과장치의 설치가 불가능하며, 자동차용 가스터빈 엔진의 경우는 여과 장치를 부착하여도 미세한 입자들이 여과 장치에 여과되지 않고 엔진 내부로 침투하게 되므로 치명적인 손상이 예상된다. 이러한 손상들은 초기에는 미세하게 발생하지만, 손상 정도가 점점 누적됨에 따라서 항공기의 안전 운전에 심각한 위험 요소로서 작용할 수 있으며, 경제적으로도 기관의 유지 보수비용의 증가를 가져올 수 있다. 따라서 압축기에 화산재 또는 대기중에 부유되어 있는 금속 입자나 먼지입자 등이 유입되었을 경우, 압축기 날개의 손상 부위와 정도를 예측하는 것이 필요하다. 따라서 본 연구에서는 Lagangian방법을 적용하여 압축기 날개위의 부유 입자 충돌 부위를 예측하고, 설계 시 이를 보완할 수 있는 기준을 제시하였다. 아울러 설계 입구각과 크게 벗어난 유동의 유입시에 발생되는 박리 현상과 이에 따른 입자의 유동 및 날개의 입자 접착 부위를 예측하였다. 본 연구에서는 여러 크기의 입자(다양한 Stokes 수)들을 주어진 속도에서 유선을 따라 압축기 입구에서 압축기 유로로 여러 위치에서 부유 시켜서 그 입자들의 궤적 및 충돌, 점착 위지를 고찰하고, 정량적인 충돌량을 해석하기 위하여 입자 충돌 계수를 정의하여 압축기 날개 표면의 충돌특성을 알아보았다. 이러한 예측을 통하여 압축기 날개 표면의 충돌 부위를 예측하고, 날개의 표면을 코팅하는 등 보호 개선책을 제시할 수 있고, 연소의 반응물 입자가 터빈 날개에 충돌하여 발생되는 날개 표면의 파손, 냉각 홀의 막임, 연소 입자의 점착 부위 등을 예측하여 보완책을 준비할 수 있도록 하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.515-522
• /
• 2012

CFIT(Controlled Flight Into Terrain) is one of the major causes of aircraft accidents. In order to solve this problem, GPWS(Ground Proximity Warning System) is used to generate terrain collision warning using the distance between the aircraft and the underneath ground. Since the GPWS uses the vertical clearance only, it frequently generates false warnings. In this study, a terrain/obstacle collision avoidance warning algorithm was developed for fast flying and highly maneuvering fighters using the flight status and the geographic information. This algorithm condsiders the overall delay in the aircraft reactive motion including the pilot's reaction time. The paper presents a detailed logic and test methods.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.186-190
• /
• 2015

국내에서 개발중인 항공기 지상이동유도 및 통제시스템(A-SMGCS)의 핵심 기능인 경로, 감시, 안내, 통제기능 중 통제기능은 충돌상황을 예측하고 관제사에게 이를 알려주어 충돌상황을 해결하는 매우 중요한 핵심기능이다. 본 연구에서는 A-SMGCS 충돌기능에 대해 소개하고 해외 검증사례를 분석하여 현재 개발중인 시스템에 적용할 수 있는 검증방안에 대하여 연구하였다. 항공기의 안전한 지상이동을 위하여 본 연구에서는 통제기능의 실제 운용시험평가를 하는 방안에 대하여 연구하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.437-450
• /
• 2014

In this study, we developed a methodology to determine the reference parameter for an aircraft impact induced risk assessment of nuclear power plant (NPP) using finite element impact analysis of containment building. The target structure used to develop the method of reference parameter selection is one of the typical Korean PWR type containment buildings. We composed a three-dimensional finite element model of the containment building. The concrete damaged plasticity model was used for the concrete material model. The steels in the tendon, rebar, and liner were modeled using the piecewise-linear stress-strain curves. To evaluate the correlations between structural response and each candidate parameter, we developed Riera's aircraft impact force-time history function with respect to the variation of the loading parameters, i.e., impact velocity and mass of the remaining fuel. For each force-time history, the type of aircraft is assumed to be a Boeing 767 model. The variation ranges of the impact velocity and remaining fuel percentage are 50 to 200m/s, and 30 to 90%, respectively. Four parameters, i.e., kinetic energy, total impulse, maximum impulse, and maximum force are proposed for candidates of the reference parameter. The wellness of the correlation between the reference parameter and structural responses was formulated using the coefficient of determination ($R^2$). From the results, we found that the maximum force showed the highest $R^2$ value in most responses in the materials. The simplicity and intuitiveness of the maximum force parameter are also remarkable compared to the other candidate parameters. Therefore, it can be concluded that the maximum force is the most proper candidate for the reference parameter to assess the aircraft impact induced risk of NPPs.