• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.739-746
• /
• 2014

The objective of this test series was to determine shear load per unit length which causes a unit slip in the fastener joint. The shear load is one of major factors which reflect partial composite action for cold-formed steel wall stud panels. Test method used were based on the methods presented in the 1962 AISI Specification. According to the comparison with experimental strength, it is seen that the shear loads used in nominal axial strength predictions made acceptable results.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.291-300
• /
• 1999

The Snyder's synthetic unit hydrograph method is selected to apply the concept of the fractal dimension by stream order for the practicable rainfall-runoff generation, and fourth types of the Snyder's relation are derived from topographic and observed unit hydrograph data of twenty-nine basins. As a result of the analysis of twenty-nine basins and the verification of two basins, the Snyder's relation which considers the fractal dimension of the stream length and uses calculated unit hydrograph data shows the best result. The concept of the fractal dimension by stream order is applied to the Snyder's synthetic unit hydrograph method. The topographic factors, used in the Snyder's synthetic unit hydrograph method, which have a property of the stream length like $L_{ma}$ (mainstream length) and $L_{ca}$ (length along the mainstream to a point nearest the watershed centroid) were considered. In order to simplify the fractal property of stream length, it is supposed that $L_{ma}$ has not the fractal dimension and the stream length between $L_{ma}$ and ($L_{ma}\;-\;L_{ca}$) has the fractal dimension of 1.027. From the utilization of this supposition, a new Snyder's relation which consider the fractal dimension of the stream length occurred by the map scale used was finally suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.257-262
• /
• 2002

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.2
• /
• pp.3730-3748
• /
• 1975

• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.57-66
• /
• 1986

• Proceedings of the Korean Fiber Society Conference
• /
• 1992.06b
• /
• pp.118-119
• /
• 1992

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06a
• /
• pp.27-28
• /
• 1991

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.11-14
• /
• 1999

본 논문에서는 중첩가산 Sinusoidal 합성방식에서 매칭된 정현파별로 위상을 계승하는 단위음성 연결방법을 제안한다. 선행 단위음의 마지막 프레임, 후행 단위음의 첫 프레임, 후행 단위음의 나머지 프레임의 단계로 나누어 각 단계마다 제안한 방식으로 선행 프레임의 위상을 계승하였다. 실험결과 후행 단위음의 연결 위치를 이동하는 기존의 방식을 사용한 연결음에 비해 연결부분에서 음성파형의 급격한 변화가 줄었다.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.138-142
• /
• 1999

Imide-containing diamine and dicarboxylic acid monomers, N-(4-aminophenyl)-4-aminophthalimide(APAP), N-(4-carboxyphenyl)-4-carboxyphthalimide(CPCP), N,N'-oxydiphenylenebis(4-aminophthalimide)(ODPAP) and N,N'-oxydiphenylenebis(4-carboxyphthalimide)(ODPCP) were prepared. Poly(amide-imide)s were prepared by condensation reaction of the diamine and the dicarboxylic acid monomers. Poly(amide-imide)s were also prepared from the diamine monomers and aromatic acid chlorodes such as terephthaloyl chloride and isophthaloyl chloride. The polymers possess inherent viscosity of 0.18~0.67 dL/g and brittle films were cast from NMP/LiCl solution. The poly(amide-imide)s are easily soluble in NMP/LiCl and also partially soluble in polar aprotic solvents such as DMF, DMSO, NMP and DMAc even at $80^{\circ}C$. DSC traces of polymers showed no glass transition temperature and melting temperature, and TGA traces showed a 10% weight loss at $500^{\circ}C$.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.468-471
• /
• 1996

이 논문에서는 대량의 음성합성용 운율 DB를 용이하게 구축하기 위해 음성번역시스템을 이용한 자동 레이블러의 성능을 다양한 음성데이타를 대상으로 평가하였다. 실험 결과 FM radio news문장, 대화체 문장 및 낭독체 문장 등에는 레이블링 대상 음소의 약 80% 이상이 오류가 30msec 이내인 범위로 레이블링 되며, 고립단어에 대해서는 약 60%의 성능을 보여주고 있다. 현재 당 연구실에서는 자동 레이블러를 이용하여 합성용 운율 DB 및 합성단위를 작성하고 있으며. 자동 레이블러를 이용함으로서 일관성 있는 레이블링 결과를 얻을 수 있을 환 아니라 작성하는데 소요되는 시간도 줄일 수 있었다