• Title/Summary/Keyword: 합리성(合理性)

Search Result 1,055, Processing Time 0.03 seconds

Philosophical Stances for Future Nursing Education (미래를 향한 간호교육이념)

  • Hong Yeo Shin
    • The Korean Nurse
    • /
    • v.20 no.4 s.112
    • /
    • pp.27-38
    • /
    • 1981
  • 오늘 저희에게 주어진 주제, 내일에 타당한 간호사업 및 간호교육의 향방을 어떻게 정하여야 하는가의 논의는 오늘날 간호계 주변에 일어나고 있는 변화의 실상을 이해하는 데서 비롯되어져야 한다고 생각하는 입장에서 먼저 세계적으로 건강관리사업이 당면한 딜레마가 어떠한 것이며 이러한 문제해결을 위해 어떠한 새로운 제안들이 나오고 있는가를 개관 하므로서 그 교육적 의미를 정의해 보고 장래 간호교육이 지향해야할 바를 생각해 보려 합니다. 오늘의 사회의 하나의 특징은 세계 모든 나라들이 각기 어떻게 전체 국민에게 고루 미칠 수 있는 건강관리체계를 이룩할 수 있느냐에 관심을 모으고 있는 사실이라고 봅니다. 부강한 나라에 있어서나 가장 빈궁한 나라에 있어서나 그 관심은 마찬가지로 나타나고 있읍니다. 보건진료 문제의 제기는 발달된 현대의학의 지식과 기술이 지닌 건강관리의 방대한 가능성과 건강 관리의 요구를 지닌 사람들에게 미치는 실질적인 혜택간에 점점 더 크게 벌어지는 격차에서 발생한다고 봅니다. David Rogers는 1960년대 초반까지 갖고 있던 의료지식의 축적과 민간인의 구매력 향상이 자동적으로 국민 건강의 향상을 초래할 것이라고 믿었던 순진한 꿈은 이루어지지 않았고 오히려 의료사업의 위기는 의료지식과 의료봉사간에 벌어지는 격차와 의료에 대한 막대한 투자와 그에서 얻는 건강의 혜택간의 격차에서 온다고 말하고 있읍니다. 균등 분배의 견지에서 보면 의료지식과 기술의 향상은 그 단위 투자에 대한 생산성을 낮춤으로서 오히려 장애적 요인으로 작용해온 것도 사실이고 의료의 발달에 따른 일반인의 기대 상승과 더불어 의료를 태성의 권리로 규명하는 의료보호사업의 확대로 야기되는 의료수요의 급증은 모두 기존 시설 자원에 압박을 초래하여 전래적 의료공급체제에 도전을 가해 왔으며 의료의 발달에 건 기대와는 달리 인류의 건강 문제 해결은 더욱 요원한 과제로 남게 되었읍니다. 현시점에서 세계인구의 건강문제는 기아, 영양실조, 안전한 식수 공급 및 위생적 생활환경조성의 문제에서부터 가장 정밀한 의료기술발달에 수반되는 의료사회문제에 이르는 다양한 문제를 지니고 있으며 주로 각개 국가의 경제 사회적 여건이 이 문제의 성격을 결정짓고 있다고 볼수 있읍니다. 그러나 건강 관리에 대한 요구는 영구히, 완전히 충족될 수 없는 요구에 속한다는 의미에서 경제 사회적 발달 수준에 상관없이 모든 국가가 공히 요구에 미치지 못하는 제한된 자원문제로 고심하고 있는 실정입니다. 또 하나의 공통된 관점은 각기 문제의 상황은 달라도 오늘날의 건강 문제는 주로 의료권 밖의 유전적 소인, 사회경제적, 정치문화적인 환경여건과 각기 선택하는 삶의 스타일에 깊이 관련되어 있다는 사실입니다. 따라서 오늘과 내일의 건강관리 문제는 의학적 견지에서 뿐 아니라 널리 경제, 사회, 정치, 문화적 관점에서 포괄적인 접근이 시도되어야 한다는 점과 의료의 고급화, 전문화, 일변도의 과정에서 소외되었던 기본건강관리체계 강화에 역점을 둔 다양하고 탄력성 있는 사업전개가 요구되고 있다는 점입니다. 다양한 건강관리요구에 적절히 대처할 수 있기 위한 그간 세계 각처에서 시도된 새로운 건강관리 접근과 그 제안을 살펴보면 대체로 4가지의 뚜렷한 성격들로 집약할 수 있을 것 같습니다. 그 첫째는 건강관리사업계획 및 그 수행에 있어 지역 사회의 적극적 참여를 유도하는 일, 둘째는 지역단위의 일차보건의료에서 부터 도심지 신예 종합병원, 시설 의료에 이르기까지 건강관리사업을 합리적으로 체계화하는 일. 셋째로 의료인력이용의 효율화 및 비의료인의 훈련과 협조 유발을 포함하는 효과적인 인력관리에 대한 제안과 넷째로 의료보험 및 각양 집단 의료유형을 포함하는 대체 의료재정 운영관리에 관련된 제안들을 들 수 있읍니다. 건강관리사업에 있어 지역사회 참여의 의의는 첫째로 사회 경제적인 제약이 모든 사람에게 가능한 최대한의 의료를 모두 고루 공급하기 어렵게 하고 있다는 점에서 제한된 정부재정과 지역사회가용자원을 보다 효율적으로 이용할 수 있게 하는 자조적이고 자율적인 지역사회건강관리체제의 구현에 있다고 볼 수 있으며 둘때로는 개인과 가족 및 지역민의 건강에 영향하는 많은 요인들은 실질적으로 의료권 외적 요인들로서 위생적인 생활양식, 식사습관, 의료시설이용 등 깊이 지역사회특성과 관련되어 국민보건의 실질적 향상을 위하여는 지역 주민의 자발적인 참여가 필수여건이 된다는 점 입니다. 지역 단위별 체계적인 의료사업의 전개는 제한된 의료자원의 보다 합리적이고 효율적인 이용을 가능하게 하며 요구가 있을때 언제나 가까운 거리에서 경제 사회적 제약을 받지 않고 이용할 수 있는 일차건강관리망을 통하여 건강에 관련된 정보를 얻으며 질병예방, 건강증진 및 기초적인 진료의 도움을 얻을 수 있고 의뢰에 대한 제2차, 제3차 진료에의 길은 건강관리사업의 질과 폭을 동시에 높고 넓게 해 줄 수 있는 길이 된다는 것입니다. 인력 관리에 관련된 두가지 기본 방향으로서는 첫째로 기존보건의료인력의 적정배치 유도이고 둘째는 기존인력의 역할확대, 조정 및 비의료인의 교육훈련과 부분적 업무대체를 들수 있으며 이러한 인력관리의 기본 방향은 부족되는 의료인력의 생산성을 높이고 주민들의 자조적 능력을 강화시킨다는 데에 두고 있음니다. 대체적 의료재정운영안은 대체로 의료공급과 재정관리를 이원화하여 주민의 경제능력이 의료수혜의 장애요소로 작용함을 막고 의료인의 경제적 동기에 의한 과잉치료처치에 의한 낭비를 줄임으로써 의료재정의 투자의 효과를 증대하는 데(cost-effectiveness) 그 기본방향을 두고 있다고 봅니다. 이러한 주변의료 사회적인 동향이 간호교육의 미래상에 끼치는 영향은 지대한 것이라 봅니다. 첫째로 장래 세계인구의 건강문제는 정치, 사회, 경제, 환경적인 의료권 밖의 요인들에 의해 더욱 크게 영향 받는다고 전제한다면 건강문제해결에 있어서도 전통적인 의료사업의 접근에서 더나아가 문제발생의 근원이 되는 생활개선이라는 차원에서 포괄적 접근을 생각하여야 하고 이를 위해선 정치, 경제, 사회전반에 걸친 깊이있는 이해과 주민의 생활환경에 직접 영향하는 교통수단, 통신망 mass media, 전력문제, 농업경영방법 및 조직적 사회활동 등 폭넓은 이해가 요구된다고 봅니다. 둘째로, 지역사회참여의 의의를 인정한다면 지역민의 자발적 참여를 효과적으로 유발시킬수 있고 의료집단과 각종 주민조직과 일반주민들 사이에서 협조적으로 일할수 있는 역량을 기르기위한 교육적 준비가 요구된다고 봅니다. 셋째로, 지역주민의 건강관리 자조능력 강화를 하나의 목표로 삼는다면 치료자에서 교육자로, 지도자에서 촉진자로, 제공자에서 지원자료의 역할의 변화 내지 다양화를 요구하게 될 것이므로 그에 대처할 수 있는 준비가 필요하다고 봅니다. 넷째로, 생각되어야 할 점은 지역중심건강관리사업을 지향하는 보건의료의 이념적 방향과 그에 상응하는 구체적 접근방법을 효율적으로 적용하기 위해서는 종횡으로 연결되는 의사소통체계의 정립과 민활한 정보교환이 이루어질 수 있어야 한다는 점에서 의사소통의 구심체로서 역할할 수 있는 역량을 함양해야 할 교육적 과제가 있다고 봅니다. 마지막으로 생각되어야 할 점은 지역중심으로 전개될 건강관리사업은 건강증진 및 질병예방적 측면과 질병진료 및 회복과 재활에 이르는 종합적이고 포괄적인 사업이어야 한다는 점에서 종래 공공 의료부문과 사설의료기관 사이에 나누어져 있던 예방의학과 치료의학의 통합 뿐 아니라 정부주축으로 이루어 지고 있는 지역사회개발사업 및 농촌지도사업과 종교 및 각종 민간인 집단이 벌이고있는 사업들과의 전체적인 통합적 접근이 이루어져야 한다고 생각하는 입장에서 종래 간호교육이 강조하지 않던 진료의 의무와 대외적 조직활동에 대한 보완적인 교육조치가 요구된다고 봅니다. 간호의 학문체계로서의 입장은 오랜 역사를 두고 논의의 대상이 되어왔으나 아직까지 뚜렷이 어떤 것이 간호 특유의 지식체계이며 건강문제에 관련하여 무엇이 간호특유의 결정영역이며 이 결정과 그 결과를 어떠한 방법으로 치료적 행위로 옮길 수 있는가에 대한 확실한 답을 얻지 못하고 있는 실정이라고 봅니다. 다만 근래에 제시된 여러 간호이론들 속에서 공통적으로 이야기되어지고 있는 개념들로선 우선 간호학문을 건강과 질병에 관련된 인간의 전인적이고 전체적인 상황을 다루는 학제적 과학으로서보는 입장이 있고 따라서 생물신체적인 면 외에 정신심리적, 사회경제적, 정치문화적 환경과의 상호작용 속에서 인간의 건강과 질병문제를 생각한다는 지향을 갖고 있다고 말할 수 있겠읍니다. 간호교육은 간호계 내적인 학문적, 이론적 체계화의 요구에 못지않게 대민봉사하는 전문직으로서의 사회적 책임을 감당해야하는 중요과제를 안고있어 변화하는 사회요구에 효과적으로 대처해 나가야 할 당면문제를 안고 있읍니다. 간효역할 확대, 보건진료원훈련 등 이러한 사회적 요구에 대응하려는 조치가 되겠읍니다. 이러한 시점에서 간호계가 분명히 짚고 넘어가야 할 사실은 이러한 움직임들이 종래의 의사들의 외업무공급을 연장 확대하는 입장에 서서 간호의 특수전문직 명목을 흐리게 할수있는 위험을 감수할 것인지 아니면 가능한 대체방안을 갖고 간호전문직의 독자적인 진로를 개척하면서 다각적인 도전을 받아들일 준비를 갖추든지 그 방향을 뚜렷이 해야할 일이라 생각합니다. 저로서는 이미 잘 훈련된 간호원들과 조산원들의 교육적, 경험적 배경을 기반으로 지역사회 최일선 건강관리요원으로 사회적 효능을 다 할수 있는 일차건강관리간호조직의 구현을 대체방안으로 제시하고 싶습니다. 간호원과 조산원들의 훈련된 역량과 건강관리체제의 구조적 변화를 효과적으로 조화시킨다면 대부분의 세계인구의 건강문제는 해결가능하다고 보는 입장입니다. 물론 정책과 의료와 행정적지원이 활성화되어지는 환경속에서만 그 기대하는 결과가 확대되리라는 점 부언하는 바입니다. 마지막으로 언급하고 싶은 점은 바로 오늘의 주제 ''교육의 동역자-선생과 학생''이라는 개념입니다. 특히 상회정의적 입장에서 보는 의료사업전개에 지역민 내지 의료소비자의 참여를 강조하는 현시점에 있어 교육자와 학생이 교육의 현장에서 서로 동역자로서 학습의 책임을 나누는 경험은 아주 시기적으로 적합하여 교육적으로 지대한 의미를 갖는 것이라고 생각합니다. 이에 수반되어져야 할 역할의 변화에 수용적인 자세를 갖고 적극 실제적용하려 노력하는 선생앞에서 자주적 결정을 행사해본 학생이야말로 건강관리대상자로 하여금 같은 결정권을 행사할수 있도록 촉구하여 주민의 자조적 역량을 기르고 의료사업의 민주화, 인간화를 이룩할 수 있는 길잡이가 될 수 있으리라 믿는 바입니다.

  • PDF

A Study on the Excavated Sab(a funeral fan) from Lime-filled Tomb and Lime-layered Tomb during the Joseon Dynasty (조선시대 회격·회곽묘 출토 삽(翣)에 대한 고찰)

  • Yi, Seung Hae;An, Bo Yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.2
    • /
    • pp.43-59
    • /
    • 2008
  • Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.

Analysis of Greenhouse Thermal Environment by Model Simulation (시뮬레이션 모형에 의한 온실의 열환경 분석)

  • 서원명;윤용철
    • Journal of Bio-Environment Control
    • /
    • v.5 no.2
    • /
    • pp.215-235
    • /
    • 1996
  • The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad & fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH+7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad & fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).

  • PDF

Agronomical studies on the major environmental factors of rice culture in Korea (수도재배의 주요환경요인에 관한 해석적 조사연구)

  • Yung-Sup Kim
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.3
    • /
    • pp.49-82
    • /
    • 1965
  • For the stable and high yields of low-land rice in Korea, the characteristics of rice plant for the vegetative and physiological responses, plant type formation, and yield components have been studied in order to obtain the fundamental data for the improvement of cultural practices, especially for the ideal fertilizer application. Furthermore the environmental conditions in Korea including temperatures, light, precipitation, and soil conditions have been compared in the broad sense with those in Japan, and the application of nitrogen, phosphorus, potassium, silicate and other micro-nutrients were described in relation to the characteristics of environmental conditions for the improvement of fertilizer application. 1. The average yield of polished-rice per 10 are in Korea is about 204 kg and this values are much less than those in Japan and Taiwan where they produce 77% to 13% more than in Korea. The rate of yield increase a year in Korea is 4.2 kg, but in Japan and Taiwan the rates of yield increase a year are 81 % and 62%, respectively. It was also found that the coefficient of variation of yield is 7.7% in Korea, 6.7% in Japan and 2.5% in Taiwan. This means that the stability of producing rice in Korea is very low when compared with those in Japan and Taiwan. 2. It was learned from the results obtained from the 'annual yield estimation experiment' that there are big differences in the respect of plant type formations between rice crops grown in Japan and Korea. The important differences found were as follows: (1) The numbers of spikelets per 3.3 square meters are 891 in Korea and 1, 007 in Japan(13% more than in Korea). (2) The numbers of tillers per 3.3 square meters at the stage of maximum tillering are 1, 150 in Korea, but in Japan they showed 19% more than in Korea. (3) The ratio of effective tillers to total tillers is 77.5% in Korea and 74.7% in Japan, which seems to be higher in Korea than in Japan. But the ratio in Korea is very low when considered the numbers of total tillers in both countries. (4) The ratio of grain to straw is 85.4% in Korea and 96.3% in Japan. 3. The average temperatures during the growing season at the area of Suwon, Kwangjoo and Taegu are almost same as those in the district of Jookokoo(Fookoo yama) in Japan, i.e., the temperatures during the rice-growing season in Korea are similar to those in the southern-warm regions of Japan. 4. Considering the minimum temperatures at the stage of limiting transplanting, 13$^{\circ}C$, the time of transplanting might be 30 to 40 days earlier than presently practicing transplanting time, which comes around June 10. 5. The temperatures during the vegetative growth in Korea were higher than those temperatures that needed in the protein synthesis which ate the main metabolism during this stage. However, the temperatures at the time of reproductive growth was lower than the temperatures that needed in the sugar assimilation which is main metabolism in this stage. In this point of view, it might be considered that the proper time of growing rice plant in Korea would be rather earlier. 6. The temperatures and the day light conditions at the time of first tillering stage of rice plant, when planted as presenting transplanting practices, are very satisfactory, but the poor day light length, high temperatures and too wet conditions in the time of last-tillering stage(mid or last July) might cause the occurrence of disease such as blast. 7. The heading stage of rice plants at each region through nations when planted as presently practicing method comes when the day light length is short. 8. It was shown that the accumulated average air-temperature at the time of maturing stage was not enough and the heading time was too late, when considered the annual deviations of mean temperatures and low minimum temperatures. 9. The nitrogen content of each plant part at the each growing stage was very high at the stage of vegetative growth when compared with the nitrogen content at the stage of reproductive growth after heading. In this respect it was believed to be important to prevent the nutrient shortages at the reproductive stages, especially after the heading. 10. The area of unsatisfactory irrigation paddy fields and natural rain-fed paddy fields are getting reduced in Korea. The correlation between the rate of reducing unsatisfactory irrigation and natural rain-fed paddy fields and the rate of yield increase were computed. The correlation coefficients(r) between the area of unsatisfactory irrigation paddy fields and yield increase were +0.525, and between the natural rain-fed paddy fields and yield increase, +0.832 and between the unsatisfactory irrigation plus natural rain-fed paddy fields and yield increase, +0.84. And there were. highly significant positive correlations between natural rain-fed paddy fields and yield increases indicating that the less the area of natural rain-fed paddy fields, the greater the yields per unit area. 11. The results obtained from the fertilizer experiments (yield performance trials) conducted in both Korea and Japan showed that the yield of non-fertilized plots per 10 are was 231 kg in Korea and 360 kg in Japan. On the basis of this it might be concluded that the fertility of soil in Korea is lower than that in Japan. Furthermore it was. also found that the yields of non-nitrogen applied plots per 10 are were 236 kg in Korea and 383 kg in Japan. This also indicates that the yields of rice in Korea are largely depending on the nitrogen content in the soil. 12. The followings were obtained when the chemical natures of soils in both Korea and Japan were compared. (1) The content of organic matter, total nitrogen, exchangeable calcium, and magnesium in Korea were no more than the half those in Japan. (2) The content of N/2 chloride and soluble silicate in low-land soil were on the average lower in Korea. (3) The exchange capacity of bases in Korea was no more than half that in Japan. 13. It was also observed by comparing the soil nature of the soil with high yielding capacity with the soil with low yielding capacity that the exchange capacity of bases, exchangeable calcium and magnesium, potassium, phosphorus, manganese, silicate and iron were low in the soil with low yielding capacity. 14. The depth of furrow slice was always deeper in the soil with high yielding capacity, and the depth of furrow slice in Korea was also shallower than that in Japan. 15. Summarizing the various conditions mentioned previously and considering the effects of silicate and trace elements such as manganese and iron besides three elements on the physiological and plant type formation of rice crops, more realistic and more ideal fertilizing practices were proposed. proposed.

  • PDF

Studies on the Foliar Application of Urea as Nitrogen Source of Rice Plant Nutrition (요소엽면살포(尿素葉面撒布)에 따른 수도(水稻)의 질소영양(窒素營養)에 관(關)한 연구(硏究))

  • Cho, Seoung-Jin
    • Applied Biological Chemistry
    • /
    • v.9
    • /
    • pp.125-147
    • /
    • 1968
  • This experiment was carried out as a part of the studies on reasonable application of nitrogen in rice plant to determine: (I) Nitrogen absorption. and rooting of rice seedlings as affected by urea foliar application at late seedling stage (II) Effect of leaf prunning and foliar application of urea at late heading stage on the maturation and yield of rice (III) Effect of foliar application of urea and its time during the stage of ear formation on yield of rice plant. Results obtained are summarized as follows. Exp.I: Nitrogen absorption and rooting of rice seedlings as affected be urea foliar application at late seedling stage. 1 : The foliar application of urea plots$(T_{1},T_2)$ snowed mare N-content than non-urea foliar application plot(T0) at lane seedling stage, being significant among treatments and foliar application of urea seemed more effective in increasing the N-content of seedlings. and promoted root settlement and early growth alter the transplanting. 2 : The carbon contents of the plants of $T_1$, and $T_2$ at late seedling stage increased than T0, and the carbon contents. of $T_1$ and $T_2$ plots became higher in amount in proportion to the nitrogen absorption as compared with those of $T_0$. 3 : C/N ratio appeared significant among soil application plots($N_1, \;N_2$) and foliar application of urea plots ($T_1$, $T_2$ and $T_0$). C/N ratio was lower in case of increased amount of nitrogen. The higher contents of nitrogen and carbon and lower C/N ratio resulted in the increment of root numbers and root lengths. Exp.II: Effect of leaf prunning and foliar application of urea at late heading stage on the maturation and yield of rice. 1 : There was a highly significant decrease in the maturing rate by severe leaf prunning. In the mean time, significant increase in maturing rate was observed with urea foliar application and it was found the more frequent application the more effective for higher maturing rate with a moderate significance. A correlationship between the level of prunning and maturing rate was enumerated to 0.961 of correlation coefficient, which indicated an increased maturing rate by the increased number of remaining leaves. 2 : The 1.000 grain weight, grain weight and hulled rice yield increased by leaf prunning in order (plot a$A_1$, $A_3$, $A_2$ and $A_0$ were 89.8%, 89.4%, 87.8% and 87.5% respectively, showing the highest of rate in $A_1$ and $A_3$ in methods of ear fertilization and being highly significant between its treatment. 3 : 1000 grain weights were highly significant between time of application, showing a tendency of increase of weights with the time lagging until days before earings as that of maturing rates. High significance was recognized between methods of ear fertilization, showing the highest in $A_2$ 23.18 gr. 4 : Yields per $3.3m^2$ were not significant between time of ear fertilization, whereas were highly significant between methods of ear fertilization. Those of $A_1$, $A_3$, $A_2$ and $A_0$ were 1.486 kg, 1.491 kg, 1.381 kg and 1.328 kg, respectively, showing the highest in $A_1$ and $A_3$. 5 : Hulling ratios showed significant different between time of ear fertilization, showing the highest in $T_2$, whereas those of methods of ear fertilization were highly significant between its treatment, Those of $A_1$, $A_3$, $A_2$ and $A_0$ were 84.72%, 84.06%, 83.29%, and 82.56% respectively, showing the highest m $A_2$ and $A_3$ among others. 6 : Yields of hulled rice per $3.3m^2$ showed significant different between time of ear fertilization, showing the highest in $T_1$ 1.192 kg. Whereas, those were highly significant between methods of ear fertilization. Those of $A_1$, $A_3$, $A_2$ and $A_0$ were 1.259 kg, 1.254 kg, 1.149 kg and 1.095 kg, respectively, showing the highest in $A_1$ and $A_2$. 7 : Contents of nitrogen on rice plant increased in case of nitrogen application as ear fertilizer and showed that the case of urea foliar application was more effective than that of soil application, showing the increased nitrogen content of rice plant was accompanied by carbon content.

  • PDF