• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.05a
• /
• pp.92-93
• /
• 1997

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.10a
• /
• pp.9-10
• /
• 1996

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.05a
• /
• pp.191-193
• /
• 2009

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.226-231
• /
• 2007

High frequency loss property of nanocrystalline amorphous ribbon with a high resistivity insulation layer of $TiO_2$ and $SiO_2$ was studied. The insulation layer was fabricated by sol-gel method using dip-coating. The optimum composition ratio of metal alkoxide and slurry for fabrication of insulation layer was established and insulation layer with high adhesion was coated on the nanocrystalline amorphous ribbon. Frequency loss of magnetic core material manufactured on nanocrystalline amorphous ribbon with the surface insulation layer decreased over 40 % compared with that of magnetic core material without surface insulation layer. The insertion loss of an inductive coupler, which was prepared by using magnetic core material coated insulation layer, decreased due to reduction of frequency loss for magnetic core material and insertion loss decreased in proportion to frequency.

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.483-489
• /
• 1995

Nd-(Fe, Co)-B합금에 Ni, Al, Ti등을 복합치환하여 그에 따른 산화거동과 자기적 성질의 변화를 조사하였다. 이들 리본의 산호거동은 parabolic한 거동을 나타내고 있으며, Ni 첨가시 매우 낮은 산화량을 나타내었다. 또한 산화된 리본은 Nd-rich상의 우선적 산화에 의해 표면에 요철이 관찰되었으며 Ni 첨가시 그러한 요철은 많이 줄어들었다. 표면의 산화층은 Nd산화물이었고, 이는 입계에 있는 Nd-rich상이 산화되고 이것이 확산 통로로 작용하였다고 생각된다. 산화가 진행됨에 따라 입계상에 의한 domain wall pinning이 약해져 자기특성이 저하하였다. 그러나 Ni 첨가시 이러한 산화거동이 크게 억제되었으며 Ni의 첨가는 Nd-rich상의 산화저항성을 증가시킴으로써 리본의 산화를 억제해 자기특성의 저하를 억제하였다.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.175-184
• /
• 1993

Abstract Co-and/or AI-added Nd-Fe-B-based magnetic alloys were fabricated by using vacuum induction melting frunace, and melt-spun ribbons were made of the magnetic alloys with single roll rapid quenching method. The variation of magnetic properties of the melt-spun ribbons as a function of Cuwheel velocity (Vs) were investigated. Bonded magnets were made of the optimally quenched ribbon fragments, and the magnetic properties of the melt-spun ribbons and the bonded magnets were studied, relating to the microstructure and crystalline structure. Cu-wheel surface velocity had a strong effect on the magnetic properties of the melt-spun ribbons, and the maximum properties were obtained around Vs =20m/sec. The optimally quenched ribbon had a cellura-type microstructure, in which fine N$d_2$F$e_14$B grains were surrounded by thin Nd-rich phase. In case of a 2.1at% AI-added melt-spun ribbon, the magnetic properties were as follows: iHc, Br, and (BH)max were 15.5KOe, 7.8KG and 8.5MGOe respectively. And resin bonded magnets were fabricated by mixing optimally quenched ribbon fragments with 2.5wt % polyamide resin, compacting and binding at room temperature. The iHc, Br and (BH)max of bonded magnet were lO.2KOe, 4.4KG and 3.3MGOe respectively. And hot-pressed magnets were made by pressing the overquenched ribbons at high temperature. The magnetic properties of hot-pressed magnets were better than those of bonded magnets, and when the holding time was 8 minutes, the iHc, Br, and (BH)max of the hot-pressed magnet were 1O.8KOe, 7.3KG and 8.0MGOe respectively. Domain structure was mainly maze pattern, which means that the easy magnetization axis could be aligned, and the domain width of the hot-pressed magnets was smaller than that of bonded magnets.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.04a
• /
• pp.72-73
• /
• 1999

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.88-89
• /
• 1999

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1993.11a
• /
• pp.52-53
• /
• 1993

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.681-686
• /
• 2017

Degradation is commonly observed in field-aged PV modules due to corrosion of the photovoltaic ribbon. The reduced performance is caused by a loss of fill factor due to the high series resistance in the PV ribbon. This study aimed to mitigate the degradation by corrosion using five sacrificial anodes - Al, Zn and their alloys - to identify the most effective material to mitigate the corrosion of the PV ribbon. The corrosion behavior of the five sacrificial anode materials were examined by open circuit potential measurements, potentiodynamic polarization tests, and galvanic current density and potential measurements using a zero resistance ammeter. Immersion tests for 120 hours were also conducted using materials and damp heat test tests were performed for 1500 hours using 4 cell mini modules. The Al-3Mg and Al-3Zn-1Mg sacrificial anodes had a low corrosion rate and reduced drop in power, making then suitable for long-term use.