• Title/Summary/Keyword: 함습도

Search Result 144, Processing Time 0.019 seconds

Estimation of Precipitable Water from the GMS-5 Split Window Data (GMS-5 Split Window 자료를 이용한 가강수량 산출)

  • 손승희;정효상;김금란;이정환
    • Korean Journal of Remote Sensing
    • /
    • v.14 no.1
    • /
    • pp.53-68
    • /
    • 1998
  • Observation of hydrometeors' behavior in the atmosphere is important to understand weather and climate. By conventional observations, we can get the distribution of water vapor at limited number of points on the earth. In this study, the precipitable water has been estimated from the split window channel data on GMS-5 based upon the technique developed by Chesters et al.(1983). To retrieve the precipitable water, water vapor absorption parameter depending on filter function of sensor has been derived using the regression analysis between the split window channel data and the radiosonde data observed at Osan, Pohang, Kwangiu and Cheju staions for 4 months. The air temperature of 700 hPa from the Global Spectral Model of Korea Meteorological Administration (GSM/KMA) has been used as mean air temperature for single layer radiation model. The retrieved precipitable water for the period from August 1996 through December 1996 are compared to radiosonde data. It is shown that the root mean square differences between radiosonde observations and the GMS-5 retrievals range from 0.65 g/$cm^2$ to 1.09 g/$cm^2$ with correlation coefficient of 0.46 on hourly basis. The monthly distribution of precipitable water from GMS-5 shows almost good representation in large scale. Precipitable water is produced 4 times a day at Korea Meteorological Administration in the form of grid point data with 0.5 degree lat./lon. resolution. The data can be used in the objective analysis for numerical weather prediction and to increase the accuracy of humidity analysis especially under clear sky condition. And also, the data is a useful complement to existing data set for climatological research. But it is necessary to get higher correlation between radiosonde observations and the GMS-5 retrievals for operational applications.

Quality Characteristics of Doenjang Meju Fermented with Aspergillus Species and Bacillus subtilis during Fermentation (Aspergillus속과 Bacillus subtilis를 이용한 된장메주 발효 중 품질 특성)

  • Kim, Jong-Wook;Doo, Hong-Soo;Kwon, Tae-Ho;Kim, Yong-Suk;Shin, Dong-Hwa
    • Food Science and Preservation
    • /
    • v.18 no.3
    • /
    • pp.397-406
    • /
    • 2011
  • To industrialize meju, four kinds of meju (Korean-style soybean koji) were made with humidity-controlled fermentation for 12 days at $28^{\circ}C$ after they were inoculated with selected strains such as Aspergillus otyzae (AO meju), Aspergillus sojae (AS meju), combined Aspergillus sojae and Bacillus subtilis (ASBS meju), and combined Aspergillus oryzae and Bacillus subtilis (AOBS meju) as starter microorganisms. The changes in the quality characteristics in the four kinds of meju were investigated during fermentation. Their enzyme activities were compared with those of the traditional meju that is made in Sunchang Folk Village according to the traditional method. In the meju that were inoculated with selective strains, the aerobic bacteria counts and mold counts exceeded 8 log cfu/g and 6 log cfu/g respectively, which were the highest fermentation values after 2 days. The aerobic bacteria counts were maintained from 2-day to the 12-day fermentation. The mold counts tended to decreased gradually after the 2-day fermentation. The amino-type nitrogen contents reached 430.5-577.5 mg%, which were the highest values after 2-day fermentation. The neutral protease activities of these mejus had the highest levels in the following order: traditional meju, $1,258.0{\pm}38.8$; AS meju, $1,238.3{\pm}38.6$; AO meju. $1,204.1{\pm}24.1$; ASBS meju, $1,040.6{\pm}10.6$; and AOBS meju, $1,033.5{\pm}11.2$ unit/g. The acidic protease activities of these meju had the highest levels in the following order: AO meju, $1,030.1{\pm}19.1$, traditional meju, $1,007.7{\pm}30.5$; AS meju, $990.9{\pm}25.0$; AOBS meju, $910.9{\pm}15.3$; and ASBS meju, $888.2{\pm}15.7$ unit/g.

Quality changes of dried persimmon based on storage conditions (농가별 저장조건에 따른 건시의 품질 특성 변화)

  • Choi, Ji-Young;Jo, Jeong-Seok;Lee, Hyeon-Jeong;Woo, Jin-Ho;Heo, Su-Hyeon;Bae, Su-In;Moon, Kwang-Deog
    • Food Science and Preservation
    • /
    • v.25 no.1
    • /
    • pp.44-51
    • /
    • 2018
  • The purpose of this study is to present the results as basic data for establishing proper storage conditions and distribution conditions of actual farms at point of increasing concern about hygiene and palatabiltiy of consumers to food. In this study, three farmhouses of dried persimmons prepared using different storage conditions were selected in Sangju (Korea). The dried persimmons were stored for 90 days. Changes in temperature and humidity were measured with a temperature and humidity recorder under each storage condition, and physicochemical analysis and sensory evaluation were performed. The average temperatures of farmhouse A, B and C were approximately $-22--23^{\circ}C$, $-19--18^{\circ}C$ and $-25^{\circ}C$ respectively. The humidities of A, B and C were 62-63%, 59-60%, and 66-67%, respectively, and the moisture contents of all farmhouses increased during the storage period, with farmhouse B showing the most rapid increase. Free sugars increased, except for those from farmhouse C. Persimmons from farmhouse B showed the greatest changes in chewiness and hardness. The values of $a^*$ and $b^*$ were significantly decreased in persimmons from farmhouse B, and the color difference value of farmhouse B was dramatically increased. Sensory evaluation showed that the color preference tended to decrease compared with the initial value. Only farmhouse B showed decreased overall acceptability. Moreover, farmhouse B had the highest storage temperature and lowest humidity. Therefore, our results showed that storage at a low temperature and high humidity was important for manufacturing high-quality dried persimmons.

Studies on Grain Filling and Quality Changes of Hard and Soft Wheat Grown under the Different Environmental Conditions (환경 변동에 따른 경ㆍ연질 소맥의 등숙 및 품질의 변화에 관한 연구)

  • Young-Soo Han
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.17
    • /
    • pp.1-44
    • /
    • 1974
  • These studies were made at Suwon in 1972 and at Suwon, Iri, and Kwangju in 1973 to investigate grain filling process and variation of grain quality of NB 68513 and Caprock as hard red winter wheat, Suke #169 as soft red winter wheat variety and Yungkwang as semi-hard winter variety, grown under-three different fertilizer levels and seeding dates. Other experiments were conducted to find the effects of temperature, humidity and light intensity on the grain filling process and grain quality of Yungkwang and NB 68513 wheat varieties. These, experiments were conducted at Suwon in 1973 and 1974. 1. Grain filling process of wheat cultivars: 1) The frequency distribution of a grain weight shows that wider distribution of grain weight was associated with large grain groups rather than small grain group. In the large grain groups, the frequency was mostly concentrated near mean value, while the frequency was dispersed over the values in the small grain group. 2) The grain weight was more affected by the grain thickness and width than by grain length. 3) The grain weight during the ripening period was rapidly increased from 14 days after flowering to 35 days in Yungkwang and from 14 days after flowering to 28 days in NB 68513. The large grain group, Yungkwang was rather slowly increased and took a longer period in increase of endosperm ratio of grain than the small grain group, NB 68513. 4) In general, the 1, 000 grain weight was reduced under high temperature, low humidity, while it was increased under low temperature and high humidity condition, and under high temperature and humidity condition. The effect of shading on grain weight was greater in high temperature than in low temperature condition and no definite tendency was found in high humidity condition. 5) The effects of temperature, humidity and shading on 1, 000 grain weight were greater in large-grain group, Yungkwang than in small grain group, NB 68513. Highly significant positive correlation was found between 1, 000 grain weight and days to ripening. 6) The 1, 000 grain weight and test weight were increased more or less as the fertilizer levels applied were increased. However, the rate of increasing 1, 000 grain weight was low when fertilizer levels were increased from standard to double. The 1, 000 grain weight was high when planted early. Such tendency was greater in Suwon than in Kwangju or Iri area. 2. Milling quality: 7) The milling rate in a same group of varieties was higher under the condition of low temperature, high humidity and early maturing culture which were responsible for increasing 1, 000 grain weight. No definite relations were found along with locations. 8) In the varieties tested, the higher milling rate was found in large grain variety, Yungkwang, and the lowest milling rate was obtained from Suke # 169, the small grain variety. But the small grained hard wheat variety such as Caprock and NB 68513 showed higher milling rate compared with the soft wheat variety, Suke # 169. 9) There were no great differences of ash content due to location, fertilizer level and seeding date while remarkable differences due to variety were found. The ash content was high in the hard wheat varieties such as NB 68513, Caprock and low in soft wheat varieties such as Yungkwang and Suke # 169. 3. Protein content: 10) The protein content was increased under the condition of high temperature, low humidity and shading, which were responsible for reduction of 1, 000 grain weight. The varietal differences of protein content due to high temperature, low humidity and shading conditions were greater in Yungkwang than in NB 68513. 11) The high content of protein in grain within one to two weeks after flowering might be due to the high ratio of pericarp and embryo to endosperm. As grains ripen, the effects of embryo and pericarp on protein content were decreased, reducing protein content. However, the protein content was getting increased from three or four weeks after flowering, and maximized at seven weeks after flowering. The protein content of grain at three to four weeks after flowering increased as the increase of 1, 000 grain weight. But the protein content of matured grain appeared to be affected by daily temperature on calender rather than by duration of ripening period. 12) Highly significant positive correlation value was found between the grain protein content and flour protein content. 13) The protein content was increased under the high level of fertilizers and late seeding. The local differences of protein content were greater in Suwon than in Kwangju and Iri. 14) Protein content in the varieties tested were high in Yungkwang, NB 68513 and Caprock, and low in Suke # 169. However, variation in protein content due to the cultural methods was low in Suke # 169. 15) Protein yield per unit area was increased in accordance with increase of fertilizer levels and early maturing culture. However, nitrogen fertilizer was utilized rather effectively in early maturing culture and Yungkwang was the highest in protein yield per unit area. 4. Physio-chemical properties of wheat flour: 16) Sedimentation value was higher under the conditions of high temperature, low humidity and high levels of fertilizers than under the conditions of low temperature, high moisture and low levels of fertilizers. Such differences of sedimentation values were more apparent in NB 68513 and Caprock than Yungkwang and Suke # 169. The local difference of sedimentation value was greater in Suwon than in Kwangju and Iri. Even though the sedimentation value was highly correlated with protein content of grain, the high humidity was considered one of the factors affecting sedimentation value. 17) Changes of Pelshenke values due to the differences of cultural practices and locations were generally coincident with sedimentation values. 18) The mixing time required for mixogram was four to six minutes in NB 68513, five to seven minutes in Cap rock. The great variation of mixing time for Yungkwang and Suke # 169 due to location and planting conditions was found. The mixing height and area were high in hard wheat than in soft wheat. Variation of protein content due to cultural methods were inconsistent. However, the pattern of mixogram were very much same regardless the treatments applied. With this regard, it could be concluded that the mixogram is a kind of method expressing the specific character of the variety. 19) Even though the milling property of NB 68513 and Caprock was deteriorated under either high temperature and low humidity of high fertilizer levels and late seeding conditions, baking quality was better due to improved physio-chemical properties of flour. In contrast, early maturing culture deteriorated physio-chemical properties, milling property of grain and grain protein yield per unit area was increased. However, it might be concluded that the hard wheat production of NB 68513 and Caprock for baking purpose could be done better in Suwon than in Iri or Kwangju area. 5. Interrelationships between the physio-chemical characters of wheat flour: 20) Physio-chemical properties of flour didn't have direct relationship with milling rate and ash content. Low grain weight produced high protein content and better physio-chemical flour properties. 21) In hard wheat varieties like NB 68513 and Caprock, protein content was significantly correlated with sedimentation value, Pelshenke value and mixing height. However, gluten strength and baking quality were improved by the increased protein content. In Yungkwang and Suk # 169, protein content was correlated with sedimentation value, but no correlations were found with Pelshenke value and mixing height. Consequently, increase of protein content didn't improve the gluten strength in soft wheat. 22) The highly significant relationships between protein content and gluten strength and sedimentation . value, and between Pelshenke value, mixogram and gluten strength indicated that the determination of mixogram and Pelshenke value are useful for de terming soft and hard type of varieties. Determination of sedimentation value is considered useful method for quality evaluation of wheat grain under different cultural practices.

  • PDF