• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.779-786
• /
• 2009

This paper deals with $H_{\infty}$ fuzzy control problem of discrete-time nonlinear Markovian jump systems with time delay. The Takgi and Sugeno fuzzy model is employed to represent a delayed nonlinear system that possesses Markovian jump parameters. A stochastic mode dependent Lyapunov function is employed to analyze the stability and $H_{\infty}$ disturbance attenuation performance of the Markovian jump fuzzy system with time delay. Stochastic Lyapunov function is dependent on the operation modes of the system. A sufficient condition for the existence of fuzzy $H_{\infty}$ controller are given in terms of matrix inequalities. Also numerical example is presented to illustrate the efficient of the proposed design methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.233-240
• /
• 2006

One of the main factor that effects on the CN's value in SCS Curve Number method for the estimation of direct runoff is the antecedent soil moisture condition (AMC). It is also common to use the AMC-III in hydrologic practice, which provides the largest runoff as possible. In this paper, AMC defending on the rainfall characteristics is analyzed using daily rainfall data at rainy season (June~September) of the Seoul station from 1961 to 2002. The probability mass function of AMC is also investigated to analyze the variation of AMC based on climate change, scenarios from several General Circulation Model (GCM) predictions. As a results we can find that the occurrence of AMC-I is reduced, and AMC-III is increased, whereas AMC-II does not change.

• Convergence Security Journal
• /
• v.3 no.3
• /
• pp.75-80
• /
• 2003

One way Functions are similar to the passwords in the sense that are easy to compute and hard to invert. So they are the most basic primitive for cryptographic applications. Especially, it is well known that it needs to exist of one way functions for the existence of the encryption schemes. In this note, we devote to study the various properties of the one way functions to give the base for the construction of the secure encryption schemes. They include the study for a sort and part of one way functions. Also, we deal with the theoretical relationship between one way function and trapdoor function.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.189-195
• /
• 2012

To predict the blooming date of 'Yumyeong' peach trees, the models for flower bud developmental rate (DVR) were constructed. The DVRs were calculated from the demanded times at controlled air temperatures. The branches of 'Yumyeong' peach trees were incubated at three different temperatures of 9.7, 15.2, and $18.9^{\circ}C$. The DVRs were also constructed with blooming dates and air temperatures in the field, collected from 1979 to 2008 at the experimental orchard of National Institute of Horticultural and Herbal Science, Suwon, Korea. All the DVRs increased linearly or exponentially with air temperature. The DVR equations evaluated under controlled air temperatures were y=0.0018x+0.0051 and y=$0.0125e^{0.0603x}$. The DVR equations under field conditions were calculated as y=0.0039x-0.0112 and y=$0.0062e^{0.1512x}$. These DVR equations offer developmental indices and predict the date for blooming with air temperature data. These DVR equations were validated against the blooming data observed in the field. When the blooming dates were calculated with exponential DVR equations and daily air temperature data, the root mean squared errors between the observed and predicted dates were around 2 days. These results suggest that the DVR models are useful to predict the blooming date of 'Yumyeong' peach trees.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.426-441
• /
• 2018

Recently, the generalized Hoek-Brown (GHB) failure criterion has been actively employed in various rock engineering calculations, but the analytical form of the corresponding Mohr failure envelope is not available, making it difficult to extend the application of the GHB criterion. In order to overcome this disadvantage, this study proposes a new method to express the tangential friction angle as an explicit function of normal stress by invoking the polynomial best-fitting to the relationship between normal stress and tangent friction angle implied in the GHB failure function. If this normal stress - tangential friction angle relationship is best-fitted with linear or quadratic polynomial function, it is possible to find the analytical root for tangential friction angle. Subsequently, incorporating the root into the relationship between shear stress and tangential friction angle accomplishes the derivation of the approximate Mohr envelope for the GHB criterion. It is demonstrated that the derived approximate Mohr failure envelopes are very accurate in the entire range of GSI value.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.3
• /
• pp.175-181
• /
• 2015

In this study, two dimensional wave overtopping tests for vertical wall were performed and overtopping formulas were suggested for impulsive and non-impulsive wave conditions. The test results from this study were compared with those from EurOtop(2007). The wave overtopping formulas were derived and suggested considering the recent research trends, while the existing method used the diagram. The wave overtopping formulas have the form of exponential and power functions using non-dimensional variables for wave overtopping and freeboard heights for non-impulsive and impulsive condition, respectively. The wave overtopping formula and effective parameters for inclined superstructure were also suggested. It is analyzed that the locations of inclined superstructure do not have the significant effects on wave overtopping, that is, the wave overtopping rate were almost same for each locations.

• Journal of Information Technology Application
• /
• v.3 no.3
• /
• pp.91-106
• /
• 2001

We propose a software-reliability growth model incoporating the amount of uniform and Weibull testing efforts during the software testing phase in this paper. The time-dependent behavior of testing effort is described by uniform and Weibull curves. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, the model is formulated by a nonhomogeneous Poisson process. Using this model the method the data analysis for software reliability measurement is developed. The optimum release time is determined by considering how the initial reliability R($\chi$ 0) would be. The conditions are ($R\chi$ 0)＞$R_{o}$ , $P_{o}$ ＞R($\chi$ 0)＞ $R_{o}$ $^{d}$ and R($\chi$ 0)＜$R_{o}$ $^{d}$ for uniform testing efforts. deal case is $P_{o}$ ＞($R\chi$ 0)＞ $R_{o}$ $^{d}$ Likewise, it is ($R\chi$ 0)$\geq$$R_{o}$ , $R_{o}$ ＞($R\chi$ 0)＞R(eqation omitted) and ($R\chi$ 0)＜R(eqation omitted)for Weibull testing efforts. Ideal case is $R_{o}$ ＞ R($\chi$ 0)＞ R(eqation omitted).

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.89.1-89.1
• /
• 2010

본 연구는 토양의 함수비를 측정하기 위하여 TDR(Time Domain Reflectometry, 시간영역 광전자파 분석기) 방식의 함수센서(CS616)에 대한 올바른 보정시험을 제안하기 위하여 피복두께, 센서간 간섭 영향, 온도의 영향 및 다짐율 변화에 대한 실내 시험을 수행하였다. 시험 결과 피복두께, 센서간 간섭 영향 및 온도의 영향은 체적함수비의 크기에 미치는 영향은 크지 않은 것으로 나타났으며, 오히려 보정시험시 정확한 체적함수비 조건을 유지하는 것이 중요할 것으로 사료된다. 또한 보정시험을 수행할 때 다짐율까지 고려한 시험을 수행하는 노력에 비하여 얻어지는 체적함수비의 정확도의 크기는 다짐율과 주기를 고려하여 얻어진 회귀식을 살펴보면 주기에 비하여 상대적으로 영향이 작은 것으로 사료된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.18-22
• /
• 1989

We calculate the distribution of the induced current on the strip by the TE waves on the infinite conducting strip. The boundary equations represented as the spatial domain function becomevery complicated equations including convolution integral. As we transform it to the spectral domain, we have a very simple equation expressed by some algebraic multiplication of the current density function and Green's function. It is shown that the computation result of the induced current distribution gives the optimum value, when the stop condition of iteration presented in this paper are satisfied.

• Journal of the KSME
• /
• v.35 no.10
• /
• pp.878-885
• /
• 1995

(1) 운전조건하에서의 가속도 및 음압 응답들에 주성분해석법을 적용하여 독립적인 진동소음원의 수를 구할 수 있다. (2) 미리 측정한 가진입력과 가속도응답사이의 주파수응답함수를 이용하면 가속도응답으로부터 운전조건하에서의 가진입력을 구할 수 있다. 그런 후 가진입력과 관측점 음압사이의 주파수응 답함수와 전단계에서 계산된 가진입력으로부터 구조기인소음을 계산할 수 있다. (3) 계산된 구조기인소음을 전체음압으로부터 제거하면 공기기인소음을 구할 수 있으며, 이 결과 각 근원의 기여율을 구할 수 있다. (4) 이 방법은 과도적 소음과 같이 주파수성분과 진동원 및 음원의 위치가 변하고 있을 때에도 적용할 수 있다.