• Journal of the Korean Geosynthetics Society
• /
• v.9 no.2
• /
• pp.33-40
• /
• 2010

In this study, the pullout tests are conducted to evaluate pullout resistance of steel strip reinforcement with transverse members. The test results are compared with theoretical equations and then the failure mechanism of transverse members is evaluated. The bearing resistance stress(${\sigma}^{\prime}_b$) of transverse members, which is applied pullout force at 50mm displacement, is closed from punching shear failure to general shear failure. The behavior by increment of a number of transverse members became closer to general shear failure. The behavior of transverse members at maximum pullout force, which is closed to general shear failure, is indicated that it is unrelated to normal stress and a number of transverse members. However, if the allowable displacement of reinforced soil wall is considered, it is impossible to apply in design. The test results are compared with bearing resistance evaluations using Prandtl's plastic theory and cylindrical cavity expansion theory. The analysis results are indicated that the bearing resistance by pullout tests is closed to predicted result by Prandtl's plastic theory, which are located between general shear failure and punching shear failure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.623-639
• /
• 1995

We have never seen any method to cope basically with complicated situation and problems around medical reimbursement rates here in Korea since 1977 witnessed by the beginning of medical insurance. By the way researchers concerned are beginning to propose some kinds of innovative and detailed ideas to government these days. They are Diagnosis-related group(DRG) and Resource-based .elative value scale(RBRVS). In the light of this situation it is so encouraging that our government can come up with that and move. In case of RBRVS research we have already been reaching even to the level of reviewing and revising methodology for its further development after naive pilot study on internal medicine and general surgery last year. However there might be something different conditions between USA and Korea to apply the same Dr. Hsiao's method and it must be vital to check so called' total work approach' compared with 'intra-service work approach' before expanding to the whole medical fields. According to the' Intra-service approach', the physician's work is supposed to be divided into three sub-works by the name of intraservice work, pre, and post service work. These sub-works, again should be merged together to be the pre-postwork subset through some statistical methods of the estimation process applied by Dr. Hsiao's methodology in RBRVS development later on. But in this paper that estimation process was not taken because we could have real values for all of those surveyed items related to just one specialty, OB & GY. Instead, We used some statistical comparison procedures relevant to demographic characteristics, reliability & validity and correlation analysis with American RVU(Relative value unit) between the total work and merged total work from intraservice work approach. The unit of analysis was individual physicians of OB & GY and 300 physicians were selected for each approach through statistical sampling method based on national population of OB & GY physicians in Korea. And also with the thankful help of Advisory Committee under Korean Association of OB & GY, questionnaires were made and mailed to the subjects, two times. As a result there were not any statistically significant differences in demographic characteristics between the two approaches except for the variable 'Response time for the questionnaires', but in other sections of comparisons, response rate, representative values, reliability & validity test, correlation analysis with American RVU, all showed 'Total approach' was not only more rational and statistically meaningful than 'Intra-service approach' but also had considerable merits. But we are not absolutely sure about this paper's robustness. Because of some limitations, we'd rather like to suggest further researches should be followed. In that sense the first thing would be a research for the influence of doctor's characteristics, especially 'frequency' on the rating of work and the way to define total work more clearly.

• Journal of Chest Surgery
• /
• v.34 no.3
• /
• pp.224-230
• /
• 2001

배경: 지속적인 온혈 심성지액을 이용한 심금 보호술이 소개된 이수, 이를 토대로 많은 임상결과가 발표되고 있다. 그러나 지속적 심정지액 주입에 따른 적정한 수술시야 확보와 역행성 관류법에 따른 우심실 보호에 대한 문제들이 제기 되고 있다. 이에 Antonio 등은 포타슘만을 이용한 간헐적 온혈액 심정지술을 이용하여 만족할 만한 임상결과를 보고 하였다. 본 임상연구는 포타슘만을 이용한 간헐적 온혈액 심정지술을 이용하여, 개심술을 시행 받은 70례의 환잔의 임상결과를 분석하여 그 유용성을 알아보고자 하였다. 대상 및 방법: 1998년 5월부터 1999년 1월까지 포타슘만을 이용한 간헐적 온혈액 심정지술을 이용하여 관상동맥 우회술 및 판막수술을 시행한 70명의 환자와 같은 기간 간헐적 냉혈액 심성지술을 이용하여 동일 술자에 의해 수술을 시행한 70명의 임상결과를 비교 분석하였다. 결과: 총 심폐기 사동 시간(98.7$\pm$6.0분, 114.3$\pm$7.5분, p=0.018),수술중 심정지를 위해 필요한 심정지액의 양(1463.0$\pm$68.0cc, 3584.0$\pm$179.0cc, p<0.001), 의식이 회복될 때까지의 시간(3.5$\pm$0.4시간, 4.9$\pm$0.8시간, p=0.044), 기관 삽관의 제거까지의 시간(10.8$\pm$0.8시간, 13.2$\pm$0.6시간, p=0.017), 부정액으로 리도케인(Lidocaine)의 도움이 필요한 경우(75.2$\pm$6.8mg, 114.5$\pm$7.2mg, p=0.006)등에 있어서는 포타슘만을 이용한 간헐적 온혈액 심정지술이 유의성의 있었고, 술수 심근효소의 상승, 사망률과 이환율에 있어서는 두군간의 유의성은 없었다. 결론: 관상동맥 우회술 및 판막수술에 있어 포타슘만을 이용한 간헐적 온혈액 심정지술은 적어도 간헐적 냉혈액 심정지술과 같은 정도의 심근 보호를 할 수 있었으며, 기존의 warm heart surgery의 장점인 심폐기 가동시간이 짧고, 의식회복이 빠른 점과 함께 용적과부학(volume loading)를 줄일 수 있는 장점이 있어 유용한 심근 보호술의 하나로 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.311-329
• /
• 1996

This study was designed to compare the level of medical utilization between the urban and rural areas of Korea and to explain the differences between the two regions. Data from the National Health Interview Survey performed by the Korean Institute of Health & Social Affairs in 1992 were used for this study utilizing a sample size of 21,841 people. The level of medical utilization such as the number of physician visits and the number of hospital admissions was compared between the regions with ANOVA. Various determinants for medical use were also compared by univariate analysis. Statistical models which included enabling factors, predisposing factors, need factors and region were constructed for bivariate analysis in order to further elucidate the level of medical utilization. The results were as follows: 1. There was greater medical use, both in terms of physician visits and inpatient care in the rural areas in spite of insufficient health resources. The particular reasons for higher medical utilization in rural areas were attributed to a higher number of initial physician visits as well as a longer the length of stay per hospital admission. Therefore, indicators representing the degree of met need (utilization/need) showed no significant difference between rural and urban areas in spite of the fact that the medical need is larger in rural areas. 2. Use of public health facilities received a significant portion of physician visits in the rural area. The government's effort to enhance primary health care through health centers, health subcenters and the nurse practitioner's post in rural areas has contributed to the increase of access to medical care in the rural areas. 3. There were some differences in the socio-demographic characteristics between two regions ; There were more elderly people over the age of 65: unstable marital status, less education and lower incomes also characterized the rural areas. Therefore, among rural people, there were more predisposing factors for medical use. Additionaly, need factors such as poor self-reported health status and high morbidity level were also high in the rural area. 4. In contrast it was learned that, the supply of health resources was mostly concentrated in the urban areas except for public health facilities. Therefore, geographical access to medical care was lower in the rural area both in terms travel time and travel cost. 5. The coefficient of the region variable was insignificant in the regression model which controlled the supply factor only. However, utilization was significantly higher in urban areas if the model included predisposing factors and need factors in addition to the supply factor. The results were interpreted as rural people have greater medical needs.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2012

This paper describes the batch test results for application of CFW(Carbonized Foods Waste), which was produced by the process of recycling waste, in PRB system. It analyzed characteristics for individual adsorption and competitive adsorption of Cu and Zn in heavy metals. In individual adsorption, the Langmuir and Freundlich models are used to predict adsorption equilibrium. The adsorption equilibrium corresponded to the Langmuir's and the maximum adsorption amount of Cu was greater than Zn's. The removal of heavy metal is predicted that Zn was faster than Cu. The reaction rate of Zn based on Pseudo-first-order and Pseudo-second-order was faster than Cu's, and the result of competitive adsorption test confirmed that the adsorption amount of Zn is reduced under similar condition for competitive adsorption rate of Cu and Zn. When Zn solution is mixed in Cu, Cu is adsorbed 86% on CFW. However, the adsorption of Zn is 19% on the contrary condition. Therefore, the removal characteristics of separate heavy metal should be considered for efficient treatment of contaminated ground based on complex heavy metal.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2017

The fundamental study for an application of nanobubble as a soil remediation enhancer on heavy metal contaminated soil was carried out. The existence and long-term stability of hydrogen nanobubbles were investigated by particle analysis and zeta-potential analysis. And the removal efficiency of copper using nanobubble water(NBW) and distilled water(DW) were compared and analyzed through a batch desorption test. As a result, it is confirmed that nanobubble which was fabricated by compression-dissolution type generator can exist for more than 14 days. The results of batch test show that copper removal of NBW was higher than that of DW irrespectively to soil type and increased as solid-liquid ratio and contact time increased, respectively. According to the pH change, the removal of copper on sand was higher on the acid side but the removal difference was slightly lower on the clay. It is considered that a high efficiency of NBW in copper removal is due to the large surface area and high zeta-potential of nanobubbles. Therefore, the nanobubble can be applied to soil remediation for heavy-metal contaminated soil as an eco-friendly enhancer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.47-57
• /
• 2015

Organic farming system has been considered environmental friendly and sustainable agricultural practice. However, the influence of organic farming on soil quality and environment is not well informed and controversial. We sampled and analyzed 0~15 cm and 15~30 cm depth soils of organic and conventional paddy fields in Yongin and Anseong. The electric conductivity and organic matter content of organic paddy soil were significantly less (p = 0.0097, 0.0067, respectively) than those of conventional paddy soil. Available phosphate and total phosphorus in 0~15 cm depth of organic paddy soil were $211.1{\pm}135.3$, $872.4{\pm}286.3mg/kg$, respectively, less than those of conventional paddy soil. Available phosphate amount in conventional paddy was $358.8{\pm}246.7mg/kg$, which is higher than 300 mg/kg that can cause secondary environmental contamination by runoff. The amount of total nitrogen in organic paddy soil was less than that in conventional paddy while their difference was not significant. The concentration of the heavy metals in organic paddy soil was also lower than that in conventional paddy soil but their difference was not statistically significant. Our findings demonstrate that electric conductivity, organic matter, nutrients, and heavy metals in organic paddy soil were less than those in conventional paddy soil. However, additional monitoring of soil properties for longer period is necessary to certify such a conclusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.101-105
• /
• 2011

The purpose of this study was to assess the marginal fit of three-unit bridges produced using LAVA CAD/CAM (computer-aided design/computer-aided manufacturing) system and conventional PFG in vitro. Materials and methods: #11, 13 resin teeth were prepared on dentiform, then duplicated. Twenty resin models were fabricated, ten for PFG 3-unit bridges and ten for LAVA 3-unit bridges. Each bridge was cemented on the resin model. Marginal discrepancy was measured with stereoscopic microscope (Nikon DS-Fi 1, Nikon, Japan) at a magnification of ${\times}75$. Independent t-test was done for the statistical analysis. Results: The mean marginal discrepancy values and standard deviations of the PFG bridges was $97.1{\pm}18.7\;{\mu}m$ for incisors, $76.6{\pm}21.8\;{\mu}m$ for canines; that of the LAVA bridges was $90.4{\pm}26.7\;{\mu}m$ for incisor, $110.2{\pm}30.2\;{\mu}m$ for canines. The mean marginal discrepancy between PFG and LAVA for incisor did not show significant difference (P<.05). But for canine, the mean marginal discrepancy of PFG bridges was smaller than that of LAVA bridges (P<.05). Conclusion: The LAVA CAD/CAM 3-unit bridges and the PFG 3-unit bridges showed clinically acceptable marginal discrepancy.