• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.543-549
• /
• 1997

The problems in the existing modeling rules for fishing nets, especially in the Tauti's rule which had been used most commonly, were investigated and it was found that the rules could not give a good similarity between the prototype and model nets because they din neither analyze the flow resistance of nets accurately nor decide the ratio of flow velocity between the two nets properly. Thus, the modeling rule was newly derived by regarding the nets as holey structures sucking water into their mouth and then filtering water through their meshes as in the previous paper. The similarity conditions obtained, between the two nets distinguished by subscript 1 and 2, are as follows; $$\frac{d_2}{d_1}=\sqrt{\frac{l_2}{l_1}},\;\frac{N_2}{N_1}=(\frac{d_1}{d_2})^{1.5}\frac{L_2}{L_1},\;\varphi_1=\varphi_2,\;\frac{d_{r2}}{d_{r1}}=\sqrt{\frac{L_2{(\rho_{r1}-\rho_{w1})}}{{L_1{(\rho_{r2}-\rho_{w2})}}$$ $$\frac{N_{a2}}{N_{a1}}=\frac{W_{a1}}{W_{a2}}(\frac{L_2}{L_1})^2,\;\nu_1=\nu_2\;and\;\frac{R_2}{R_1}=(\frac{L_2}{L_1})^2$$, where L is the length of nettings, d the diameter of netting twines, 2l the mesh size, $2\varphi$ the angle between two adjacent bars, N the number of meshes at the sides of nettings, $d_r$, the diameter of ropes, $\rho_r$, the specific gravity of ropes, $W_a$ the weight in water of one piece of float or sinker, $N_a$ the number of floats or sinkers, $\nu$ the flow velocity, and R the flow resistance of net. In the case where the model experiments aim at investigating the influence of weight in water of nettings on their shapes in nets subjected to the water flow of very low velocity, however, the following condition is added; $$\frac{\rho_2-\rho_{w2}}{\rho_1-\rho_{w1}}=\frac{d_1}{d_2}$$ where $\rho$ is the specific gravity of netting twines.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.2
• /
• pp.20-33
• /
• 2020

This study aims to examine the trends in the preservation of urban public parks with a focus on the international movement to acknowledge and preserve the heritage value of urban parks. First, the background in which the concept of "historic urban park" first appeared internationally, as well as the current situation were investigated. Then, the cases of the United Kingdom (UK), the United States (US), and Japan, all of which are already preserving and managing urban public parks, were analyzed. In the ICOMOS-IFLA Document on Historic Urban Public Parks, the International Council on Monuments and Sites (ICOMOS), which is a group of specialists dedicated to the conservation and management of cultural heritage, mentions that it is necessary to maintain the social, intangible, aesthetic, ecological, and civic values of historic urban public parks. In addition, according to ICOMOS, it is necessary to preserve elements of parks, such as space composition, topography, light, and environment. The UK, the USA, and Japan have their own unique characteristics for the background of preserving urban parks, the preservation system, the selection of parks to be preserved, and the elements to be preserved within the park. The UK has categorized parks into certain types from each period and has tried to preserve the common elements in each type. The US has selected the parks to preserve by determining the meaning of the parks itself considering multiple aspects, embracing not only the physical form of the parks, but also the culture, monumentality, and social values. Recently, Japan began the preservation of historic urban parks as a matter of policy and started to implement a preservation policy by investigating modern parks that are believed to be worth preserving. Specialists in cultural heritage preservation have argued that the method of preservation of historic urban parks must differ from that of other parks or gardens. Nonetheless, observing cases in these three countries showed that, regardless of their administrative and legal systems regarding cultural heritage and urban public parks, their policies were still limited to preserving only the physical elements of parks. The direction and methodology for the preservation of historic urban parks must be developed further and elaborated upon in terms of the evolving concept and definition of heritage. Urban parks are where various historic values are accumulated, connoting historical meanings dealing with the memories of the parks and the urban dwellers. This study found that, worldwide, park management has been carried out in a way that the historic values of parks are respected and preserved. This global trend in preserving the historic values of urban public parks has significant implications for the management of urban public parks in Korea that are being formed and renewed repeatedly.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2007

This study was investigated hazardous substances in agricultural products of baggage by Incheon Port from chinese. We tested 293 kinds of dried red pepper, cereal, sesame, bean, nut, herbal medicine and sesame oil for pesticides residue, mold, tar color, sudan I, II, III, IV, aflatoxin, Pb, Cd, Hg, As and sulfur dioxide residues. Violated samples over standard limits by Korean Food and Drug Administration (KFDA) were 76 dried red pepper over the number of mold and 1 dried red pepper detected red 102 tar color and 1 dried red pepper over the number of mold and detected red 102 tar color simultaneously. And 2 rice, 1 sticky rice, 1 adlay and 1 millet were over lead. Violated herbal medicine were 2 Zizyphi Furctus and 2 Zingiberis Rhizoma over sulfur dioxide residue and 1 Zingiberis Rhizoma over sulfur dioxide residue and cadmium simultaneously. The contents of heavy metals in cereal were as follow; $Pb\;0.000{\sim}0.740mg/kg(0.191{\pm}0.209),\;Cd\;0.000{\sim}0.108mg/kg(0.007{\pm}0.020),\;Hg\;0.000{\sim}4.201mg/kg(0.162{\pm}0.319)$. The contents of heavy metals in herbal medicine were as follow; $Pb\;0.000{\sim}2.480mg/kg(1.130{\pm}0.730),\;Cd\;0.000{\sim}0.761mg/kg(0.044{\pm}0.122),\;Hg\;0.000{\sim}0.157mg/kg(0.022{\pm}0.033),\;As\;0.000{\sim}0.560mg/kg(0.040{\pm}0.082)$. Contents of $SO_2$ ranged $2.0{\sim}1459.4ppm(303.1{\pm}324.2)$.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.261-268
• /
• 2004

Osteoporosis is a clinical condition in which the amount of bone tissue is reduced and the likelihood of fracture is increased. It is known that the electrical property of the bone is related to its density, and, in particular, the electrical resistance of the bone decreases as the bone loss increases. This implies that the electrical property of bone may be an useful parameter to diagnose osteoporosis, provided that it can be readily measured. The study attempted to evaluate the electrical conductivity of bone using a technique of electrical impedance tomography (EIT). It nay not be easy in general to get an EIT for the bone due to the big difference (an order of 2) of electrical properties between the bone and the surrounding soft tissue. In the present study, we took an adaptive mesh regeneration technique originally developed for the detection of two phase boundaries and modified it to be able to reconstruct the electrical conductivity inside the boundary provided that the geometry of the boundary was given. Numerical simulation was carried out for a tibia phantom, circular cylindrical phantom (radius of 40 mm) inside of which there is an ellipsoidal homeogenous tibia bone (short and long radius are 17 mm and 15 mm, respectively) surrounded by the soft tissue. The bone was located in the 15 mm above from the center of the circular cross section of the phantom. The electrical conductivity of the soft tissue was set to be 4 mS/cm and varies from 0.01 to 1 ms/cm for the bone. The simulation considered measurement errors in order to look into its effects. The simulated results showed that, if the measurement error was maintained less than 5 %, the reconstructed electrical conductivity of the bone was within 10 % errors. The accuracy increased with the electrical conductivity of the bone, as expected. This indicates that the present technique provides more accurate information for osteoporotic bones. It should be noted that tile simulation is based on a simple two phase image for the bone and the surrounding soft tissue when its anatomical information is provided. Nevertheless, the study indicates the possibility that the EIT technique may be used as a new means to detect the bone loss leading to osteoporotic fractures.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.147-153
• /
• 2011

This study is to measure the differences of the trace-metals resulted from the different ecologies, such as nickel(Ni), copper(Cu), zinc(Zn), cadmium(Cd), plumbum(Pb), arsenic(As) and chrome(Cr) remaining in the parts of Korean Yeongdeok Crab (KYC) and Russian Snow Crab (RSC) based on ICP-MS. The recovery rate of each metal certified the reference materials (CRM) was in the average of 81~99%, which corresponded with the level required in Codex. The level of metals in the parts of KYC was in the order of Ni > As > Zn > Cu > Cr > Cd in the both male and female shell; the order of Zn > As > Cu > Cr > Ni > Cd in the leg flesh; the order of Zn > As > Cu > Cr > Cd > Ni in the body flesh; the order of Cu > Zn > As > Cd > Cr > Ni in the gill; the order of Cu > As > Zn > Cd > Ni > Cr in the male hepatopancreas; the order of Cu > Zn > As > Cd > Cr > Ni in the female hepatopancreas, thereby showing some differences. It was revealed that the levels of most metals (nickel, copper, zinc, arsenic and chrome) were similar between KYC and RSC except cadmium which was somewhat lower than that of KYC. However, the cadmium in RSC was discovered in high level in most of the parts, two times higher in the hepatopancreas, and four times in the gill. It was also revealed that the trace metal contents were changing according to the size of KYC; the metals with the highest level of Ni in shell, Zn in leg and body flesh, Cu in gill tended to decrease as growing, whereas the cadmium contents tended to increase overall and accumulated the most in hepatopancreas. The results showed there was a possibility that the phenomenon of bioaccumulation within hepatopancreas would increase as growing.

• Korean Journal of Microbiology
• /
• v.43 no.4
• /
• pp.325-330
• /
• 2007

RNase E is an essential Escherichia coli endoribonuclease that plays a major role in the decay and processing of a large fraction of RNAs in the cell and expression of N-terminal domain consisted of 1-498 amino acids (N-Rne) is sufficient to support normal cellular growth. By utilizing these properties of RNase E, we developed a genetic system to screen for amino acid substitutions in the catalytic domain of the protein (N-Rne) that lead to various phenotypes. Using this system, we identified three kinds of mutants. A mutant N-Rne containing amino acid substitution in the S1 domain (I6T) of the protein was not able to support survival of E. coli cells, and another mutant N-Rne with amino acid substitution at the position 488 (R488C) in the small domain enabled N-Rne to have an elevated ribonucleolytic activity, while amino acid substitution in the DNase I domain (N305D) only enabled N-Rne to support survival of E. roli cells when the mutant N-Rne was over-expressed. Analysis of copy number of ColEl-type plasmid revealed that effects of amino acid substitution on the ability of N-Rne to support cellular growth stemmed from their differential effects on the ribonucleolytic activity of N-Rne in the cell. These results imply that the genetic system developed in this study can be used to isolate mutant RNase E with various phenotypes, which would help to unveil a functional role of each subdomain of the protein in the regulation of RNA stability in E. coli.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.628-634
• /
• 2008

In recent years, cross-contamination has become one of the noticeable issues in dental clinic. Two major routes of contamination are the direct-contamination through blood and oral secretion and the indirect-contamination through dental office equipments. Especially, air-contamination through air-floating pollutant in a confined space like hospital, and also contamination through aerosol ejected from high-speed handpiece in a dental office was interested. The purpose of this study was to understand risk of bacterial infection through aerosol from handpiece in a dental office, which will help the practitioner with prevention of contamination during dental treatment. The main findings are as follows. 1. In a comparative test, the group using handpiece has higher bacterial number than the group not using handpiece with significant statistical difference(P<0.01). 2. The group using handpiece with rubber dam has lower bacterial number than the group using handpiecewithout rubber dam with significant statistical difference(P<0.01). 3. Comparing the group using drainage water with the group using distilled water as a handpiece water source results in 22.4 cfu and 17.0 cfu respectively but the difference is no statistically significant(P>0.05). 4. Measuring cfu at 0.5m and 1.5m distance, 0.5m distance showed higher bacterial number with statistical significance(P<0.01). 5. Classification of bacterial types showed the largest bacterial number came from gram-positive micrococcus(73.9%), and gram-negative micrococcus, gram-negative bacillus, and gram-positive bacillus follow in descending order.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.4
• /
• pp.367-375
• /
• 2002

Background : Murine typhus is a flea-borne, worldwide Rickettsial disease caused by Rickettsia typhi. Its symptoms are typically mild but sometimes can be fatal. The major clinical features include fever, rash, and headache. Recently, we experienced 6 cases of ARDS associated with a Rickettsia typhi infection. This study was aimed to analyze the attributing factors for fatal murine typhus and to review the characteristics of the patients who showed acute respiratory distress syndrome as the initial presentation. Methods : The medical records of 15 patients diagnosed as murine typhus were reviewed. The diagnosis was made by single titers of 1:512 or higher, or a 4-fold rise with compatible clinical features. Acute Respiratory Distress Syndrome (ARDS) was defined according to the American-European Consensus Conference. The Characteristics between the ARDS group and the non-ARDS group of murine typhus were compared. Results : Six patients developed ARDS as their initial presentation. Two of them were women and three of them had lived urban area. None of Them a showed skin rash. One of them expired during treatment. The time lapse until the commencement of the specific treatment, the lower serum albumin level, the higher serum total bilirubin level, the higher APACHE III score and the higher MOD score were significantly associated with the ARDS group compared to the non-ARDS group. Conclusion : Murine typhus should be considered as one of the etiologies for the ARDS of unknown cause, particularly in an endemic regions. ARDS caused by Murine typhus generally has a good prognosis.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.2
• /
• pp.64-72
• /
• 2004

We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.