• Journal of The Korean Association For Science Education
• /
• v.30 no.8
• /
• pp.1060-1074
• /
• 2010

In this study, we investigated teachers' experiences in teaching with the science museum as well as their confidence, their perceptions, educational needs, and their willingness to practice the instructions using science museum. A survey was administered to 225 elementary and secondary school teachers. The analyses of the results revealed that few teachers had training for the instructions using the science museum and not many teachers had experience in teaching with the science museum. Many teachers were also found to have low confidence in teaching with the science museum. Although the teachers had a relatively good understanding of the educational effects, nature and teaching strategies for the instructions using the science museum, they tended to apply the formal views on science teaching/learning to learning with the science museum. The levels of willingness to use the science museum in their instructions and educational needs of the instructions using the science museum were high. They wanted the information about practical aspects to use in the instructions using science museum most. Educational implications of these findings are discussed.

• Microbiology and Biotechnology Letters
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1978

The microbial and chemical changes, and characterization of the predominant acid-producing bacteria in the fermenting pig feces blended with corn meal at a ratio of 50：50 were studied. The fermentation was dominated by lactobacilli, which multiplied rapidly for the first 24 hours. The acid produced during the fermentation caused rapid pH drop to pH 4.5 and halted the growth of E. coli and yeast. The initial acid producing bacteria in the mixture was predominantly Streptococcus species, which were reduced in number rapidly. After 7 days of fermentation, three lactobacilli species were appeared L. acidophilus, L. fermenti, L. delbrueckii. Chemical changes during the fermentation were also studied. The lactic acid fermentation imparted a good tangy acid flavor to the corn-feces mixture by removing or covering the .fecal ordour and made the corn-feces mixture palatable for the animal as well as halted the unwanted microbial flora. We hope the lactic acid fermentation will replace the heat processing in the utilization of animal feces.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.51-57
• /
• 2017

A wireless sensor network is composed of many resource constrained sensor nodes. These networks are attacked by malicious attacks like DDoS and routing attacks. In this paper, we propose the intrusion detection and prevention system using convergence of software-defined networking and security technology in wireless sensor networks. Our proposed scheme detects various intrusions in a central server by accumulating log messages of OpenFlow switch through SDN controller and prevents the intrusions by configuring OpenFlow switch. In order to validate our proposed scheme, we show it can detect and prevent some malicious attacks in wireless sensor networks.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.301-306
• /
• 2017

Wire electrical discharge machining (WEDM) process was evaluated to slice Silicon (Si) for various applications. Specifically, various Si workpieces with various resistances, such as single and multi crystalline Si bricks and wafers were used. As conventional slicing processes, such as slurry-on or diamond-on wire slicing, are based on mechanical abrasions between Si and abrasive, there is a limitation to decrease the wafer thickness as well as kerf-loss. Especially, when the wafer thickness is less than $150{\mu}m$, wafer breakage increases dramatically during the slicing process. Single crystalline P-type Si bricks and wafers were successively sliced with considerable slicing speed regardless of its growth direction. Also, typical defects, such as microcracks, craters, microholes, and debris, were introduced when Si was sliced by electrical discharge. Also, it was found that defect type is also dependent on resistance of Si. Consequently, this study confirmed the feasibility of slicing single crystalline Si by WEDM.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.576-582
• /
• 2016

Currently, every person possesses a smart phone due to the development of the IT industry. However, crosswalk pedestrian accidents have been sharply increasing due to smart phone use. If a traffic light can recognize smart phones when a smart-phone user approaches and arrives at a given sign, many accidents could be reduced by using beacon signals. Before the era of smart phones, the accident rate involving cell phone use was relatively low. Nevertheless, when considering the development of IT equipment that produces a threat to human life, government cannot regulate smart phone use outside. The purpose of this paper is to indirectly warn a smart phone user in order to reduce the accident rates.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.624-628
• /
• 2014

Reverse electrodialysis (RED) is a technique to produce electricity from two feed water that has different salinity. Recently, RED has been considered the attractive technology because this new process has large global potential and possibility to generate energy from abundant but largely unused resources. To make RED an economically attractive technology, the optimization of operation condition should be developed. In this study, we investigate the relation of internal resistance to power density of RED. And the effect of sea water and fresh water flow rate on power density was confirmed. To minimize the internal resistance and to increase power density of RED, the ratio of sea water and fresh water flow rate was optimized. Experimental result show the best performance with $1.30W/m^2$ of power density at 1.7 flow ratio of seawater/freshwater.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.2
• /
• pp.121-158
• /
• 2017

The purpose of this study was to propose the developmental direction for small libraries based on a set of various situational analysis of small libraries in Seoul. By analyzing the operational status of the autonomous regions of different operating methods, we also pursued qualitative enhancement of small libraries by autonomous district by proposing optimized operation methods. As a consequence of the study, it was analyzed that the public and private libraries need to be distinguished in consideration of the characteristics of operation according to the operating entity rather than uniform budget support and guidance management. That is, the small libraries scattered throughout Seoul were founded by the principal of their establishment for the purpose of providing knowledge information and reading culture service within the public activity area. Therefore, if Seoul intervenes and manages under the current situation, where the libraries are operating independently in accordance with the purpose of establishment, regardless of whether they meet the user requirements or not in terms of quality or quantity, various problems may be caused. In this background, it seems appropriate to restrict the library management in line with relevant regulations.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.878-886
• /
• 2009

This paper proposes an optimal algorithm for generating a train speed profile giving optimal energy efficiency based on GA (Genetic Algorithm) and shows its effectiveness with simulations. After simplifying the train operation mode to a maximum traction, a coasting and a maximum breaking, adjusting the coasting point to minimize the train consuming energy is the basic scheme. Satisfying the two constraints, running distance and running time between two stations, a coasting point is determined by GA with a fitness function consisting of a target running time. Simulation results have shown that multiple coasting points could exist satisfying both of the two constraints. After figuring out consumed energies according to the multiple coasting points, an optimal train speed profile with a coasting point giving the smallest consumed energy has been selected. Simulation blocks for the train performance simulation and GA have been designed with the Simulink.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.717-722
• /
• 2007

Most of DC 1500V electric railway substations have adopted diode rectifiers to supply stable DC power. However, the diode rectifiers operate in the first quadrant of the voltage-current plane and thus need regenerative inverters which transfer the surplus regenerative power caused by regenerative braking of electric train sets into the grid. In order to select the proper capacity and installation position of regenerative inverter, it needs to investigate the consumed and regenerative energy of the electric traction substations in advance. This paper presents an analysis of regenerative energy in two substations operating in Seoul Seolleung and Kwangju Yangdong substations. DC line voltage and feeder currents are measured for a day to calculate consumed and regenerative power far four feeders. We calculated an amount of regenerative energy consumed in other feeders and estimated the cost reduction in energy consumption due to the reuse of regenerative energy

• Journal of Radiation Protection and Research
• /
• v.23 no.4
• /
• pp.243-249
• /
• 1998

The methodology for justification and optimization of the countermeasures related with contamination management of milk was designed based on the cost and benefit analysis. The application results were discussed for the deposition on August 15, when pasture is fully developed in Korean agricultural conditions. A dynamic food chain model DYNACON was used to estimate the time-dependent radioactivity of milk after the deposition. The considered countermeasures are (1) the ban of milk consumption (2) the substitution of clean fodder, which are effective in reducing the ingestion dose as well as simple and easy to carry out in the first year after the deposition. The total costs of the countermeasures were quantitatively estimated in terms of cost equivalent of doses and monetary costs. It is obvious that a fast reaction after the deposition is an important factor in cost effectiveness of the countermeasures. In most cases, the substitution of clean fodder was more effective countermeasure than the ban of consumption. A fast reaction after the deposition made longer justifiable/optimal duration of the countermeasure.