• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2073-2078
• /
• 2014

Based on the DGPS radio wave measurement in the coast of the yellow-sea, south-sea and east-sea, the DGPS service regions in the korean coastal ferry route are analyzed in this paper. The impact of obstacles on the propagation due to the archipelago and island regions are measured and analyzed in the point of service region. The ocean-based DGPS reference stations provide the wide DGPS ocean service regions with signal strength more than $40dB{\mu}V/m$ and signal-to-noise ratio more than 10 dB. Based on the overlapping of the service regions between the DGPS reference stations, the DGPS services with good quality are provided in the coastal ferry route segments. In case of regions where the propagation obstacles are scattered, the increasingly good service can be provided under conditions of output power reinforcement and antenna efficiency enhancement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7629-7634
• /
• 2015

The purpose of this study is is to organize the site-plan types of common design's Goon office buildings in Japanese colonial period based on the main building's shape and main & attached building connection way and to investigate all the types' addition & remodeling ways. The study used literature research method, analysing the digital images, the annotation of the images, official documents between the Japanese government-general of Korea and To, and articles of newspapers or journals. The site-plans are sorted 5 types and subdivided 13 as their addition & remodelling ways. The initial shapes of site-plan were changed to apply every Goon's site circumstances, The main buildings were always in the center ahead and attached buildings behind or next to them in any cases of new construction, addition or remodeling. The buildings of the common design's were constructed until early 1930s and it means that their architectural level was lower than Pu office buildings, although both had same administrational level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1599-1606
• /
• 2008

Recently, new dispersed generation systems such as photovoltaic, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy with the provision against oil crisis. The technical guidelines on the interconnection of dispersed generation systems have been established and conducted positively. However, protection devices (Re-closer) in primary feeder of distribution system interconnected with photovoltaic generation may cause problems with mis-operation, and then many customers could have problems like an interruption. So, this paper presents the optimal method to minimize the impact of interruption, using both the symmetric method and MATLAB/SIMULINK. And, also this paper shows the effectiveness of proposed method by simulating at the real distribution systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.847-851
• /
• 2011

Photovoltaic System is increasing install capacity based on environmental-friendly characteristics. It have been actively studied to improve the efficiency. In order to design highly efficient system, it is important to understand the output characteristics of solar panels. The single diode model can represent the physical characteristics of solar panel. But it needs complex process such as mutli-step measurement and numerical analysis to get the exact parameters. In this paper, The method for extracting characteristic parameters of the single diode model based on the I-V characteristic curves in the panel manufacturer's data-sheet is presented. To verify the proposed method, solar cell model constructed in simulink. Simulink model output compared with output graph in datasheet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.269-276
• /
• 2016

Internet of Things (IoT) is based on wireless networks being able to connect things and people on a large scale. In the IoT environment, reliable broadcast plays an important role to distribute data to a large number of devices. Energy harvesting from a surrounding environment is a key technique to achieve a sustainable IoT network. In IoT networks, a problem of transmission errors and energy shortage should be mitigated for reliable broadcast. In this paper, we propose an energy-efficient and reliable broadcast method to consider packet errors and energy consumption in the environment where a large number of nodes are connected. The proposed scheme can improve data restoration probability by up to 15% and reduce energy consumption by up to 17%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1190-1196
• /
• 2016

In this paper, a cross-layer interworking scheme for different protocols is proposed to provide an efficient internet services in very small aperture terminal (VSAT) based satellite communication systems. In addition, we implement the proposed interworking model and prove the feasibility of the proposed system. VSAT based satellite communication systems commonly use digital video broadcasting (DVB)-S2 standard. Unfortunately, DVB-S2 has inefficient parts to support IP based internet services because it has originally been designed to support broadcasting services. Generic stream encapsulation (GSE) protocol, which is a layer 2 protocol, has been proposed to mitigate this inefficiency. We propose a cross-layer interworking scheme to cooperate efficiently between IP and GSE protocols and between GSE protocol and DVB-S2, respectively. In addtion, we implement the proposed interworking schemes via computer softwares and prove the feasibility using NI-USRP and commercial DVB receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1060-1068
• /
• 2016

The range-free localization using connectivity information has problems of mobile tracking. This paper proposes two Bayesian filter-based mobile tracking algorithms considering a propagation scenario. Kalman and Markov Chain Monte Carlo (MCMC) particle filters are applied according to linearity of two measurement models. Measurement models of the Kalman and MCMC particle filter-based algorithms respectively are defined as connectivity between mobiles, information fusion of connectivity information and received signal strength (RSS) from neighbors within one-hop. To perform the accurate simulation, we consider a real indoor map of shopping mall and degree of radio irregularity (DOI) model. According to obstacles between mobiles, we assume two types of DOIs. We show the superiority of the proposed algorithm over existing range-free algorithms through MATLAB simulations.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.59-63
• /
• 2008

The surface runoff is one of the important components for the surface water balance. However, most Land Surface Models(LSMs), coupled to climate models at a large scale for the prediction and prevention of disasters caused by climate changes, simplistically estimate surface runoff from the soil water budget. Ignoring the role of surface flow depth on the infiltration rate causes errors in both surface and subsurface flow calculations. Therefore, for the comprehensive terrestrial water and energy cycle predictions in LSMs, a conjunctive surface-subsurface flow model at a large scale is developed by coupling a 1-D diffusion wave model for surface flow with the 3-D Volume Averaged Soil-moisture Transport(VAST) model for subsurface flow. This paper describes the new conjunctive surface-subsurface flow formulation developed for improvement of the prediction of surface runoff and spatial distribution of soil water by topography, along with basic schemes related to the terrestrial hydrologic system in Common Land Model(CLM), one of the state-of-the-art LSMs.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.145-151
• /
• 2008

A novel method was suggested for the estimation of design population and design wastewater flow rate in fishing and agrarian village. Even though the population was decreasing continuously in this area, the design population was considered as constant with the passage of the time in conventional methods. And although the portion of groundwater uses was pretty high, the design wastewater flow rate was determined by the supply amount of tap water. Consequently, the design population and the design wastewater flow rate were overestimated. To prevent these overestimates, the design population was predicted to decrease gradually using the population trends from Korea National Statistical Office, and the design wastewater flow rate was determined using the way that the supply amount of tap water was applied in developed areas and the supply amount of groundwater was used in undeveloped areas.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.119-127
• /
• 2008

The flow characteristics and the aspects of riverbed changes were analyzed for the upstream and downstream sections of Gongju Bridge. The upstream and downstream had complex topography, and the sections had the confluence of tributaries and several structures. In order to simulate the flow characteristics of the target sections, 1D HEC-RAS and 2D RMA2 were applied. As a result, the longitudinal water level of the target sections matched the results of simulated 1D and 2D samples. Also, 2D SED2D were applied to predict riverbed changes. As a result of the simulation, quantitative analysis was able to be performed for longitudinal riverbed changes from the sections of sudden change, bridges, the confluence of tributaries, and bends. Also, the distribution of riverbed changes on the main sections was in close relation to flow velocity. As a result of evaluating the sensitivity of SED2D, the concentration of suspended sediment, the thickness of sand beds, and the size of sand grains affected riverbed changes sensitively. These results will be used to apply the models of riverbed changes in the future.