• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.293-299
• /
• 2002

By the reaction of m-cresol as a microbicide with acryloyl chloride m-cresyl acrylate (CA) was synthesized, and polymers with the moiety of m-cresol were prepared by the radical terpolymerization of CA -methylmethacrylate -acrylic acid. The contents of CA unit in the polymers were found to be 4.7 mol% and 10.1 mol% from their nuclear magnetic resonance spectra. The number -average molecular weights of the polymers were in the range of 12000 to 15000. Through the hydrolysis of the polymers m-cresol was released. The release rate of the microbicide increased with increasing PH of the release medium. This result can be attributed to enhanced proton dissociation of carboxyl group of the acrylic acid unit in the polymers. These polymers showed microbicidal activities for S. aureus as a positive microbe and E. coli as a negative microbe.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.693-702
• /
• 2009

A computational fluid analysis was performed on an LOx line system of a liquid rocket engine. The model was created with 3D CAD and imbedded to the 3D CFD program. Before the full scale analysis on the system was carried out, each components with simplified models was analyzed to save time and cost. As a result, the inlet pressure of the gas generator should be compensated with a certain device unless the inlet pressure of the line system is sufficiently high. The flow pattern of the exit of the system was dependant upon the location of the orifice as well as the size. As a whole the line system analyzed met the requirements, and will be tested and confirmed after being manufactured.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.37-43
• /
• 1994

Mononitrotoluenes were reduced to aminotoluenes using porphyrin as a catalyst in the presence of several types of reductants including hydrogen sulfide and 1, 4-dithiothreitol(DTT). Intermediates and final products of porphyrin-catalyzed reduction of mononitrotoluenes were identified and a pathway for the reduction of the nitro group to the corresponding amino group was proposed. The optimum pH for the reduction was determined. The catalytic activity of the porphyrin was confirmed by UV/VIS absorption spectra and basic kinetics of porphyrin-catalyzed reduction were studied. Of several types of reductants tested, DTT sodium hydrosulfite, and hydrogen sulfide were seen to give significant reduction of nitrobodies. When hydrogen sulfide was used as a reductant hydrogen sulfide and nitrotoluenes were removed simultaneously.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.87-91
• /
• 1969

Experiments on the rearing of larvae of the prawn, Penaeus japonicus Bate, have been con-ducted by using a large tank A ($3.4\times1.9\times1.0m$) and two small tanks B and C ($1.45\times0.85\times1.0$). 1) Between spawning and the first zoeal stages, no significant elapsed time difference was noticed among the rearing tanks. At about $23^{\circ}C$ of water temperature nearly all of the larvae in the tanks metamorphosed into the first zoeal stage in about 36-48 hours. However the period of time which elapsed between the spawning and post-larval stage showed some differences bet-ween the tanks, i.e., 19-20 days in tank A and 15-17 days in tanks B and C, respectively 2) No difference in body length of the larvae has been observed among the three tanks. 3) The post-larva passed through several molts, one every four or five days, before reaching the young prawn about 36-40 days after spawning. 4) Throughout the zoeal stages the highest mortality was found at the time of molting between the first and second zoeal stages showing about $51.39\%$ in tank A, $50.70\%\;and\;31.91\%$ in tanks B and C, respectively. 5) Total mortality during the duration of the larval stages was around $75\%$ in all the rearing tanks.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.124-131
• /
• 2009

Surfactant polyvinyl alcohol (PVA-95) 1, 2, 4mg. $L^{-1}$ and calcium lignosulfonate (CLS) 5, 25, 50, 100mg. $L^{-1}$ were treated to the nutrient solution containing 1.0mg. $L^{-1}$ selenium (Se) to evaluate Se absorption effect using small DFT apparatus. The growth of leaf lettuce and pak-choi did not show unique significance by surfactant kinds and concentration in the tested range and physiological disorder. Vitamin C in leaves of two leafy vegetables was not significantly affected by surfactants also. Among major cations K content in pak-choi was highest in Se I+PVA-95 4mg. $L^{-1}$ treatment, and high in Se I+CLS 5 mg. $L^{-1}$ treatment. Ca content in two leafy vegetables showed increasing pattern by the two kinds of surfactants. Mg content was high in Se I+CLS 25mg. $L^{-1}$ treatment compared to control. Pak-choi absorbed Se about 10 times higher than leafy lettuce. Se content in leaves of two leafy vegetables increased by the treatment of two kinds of surfactants with the exception of CLS 100mg. $L^{-1}$ treatment.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.407-415
• /
• 2013

The purpose of this research is to verify the performance of hardening accelerator in cement paste through mechanical performance evaluation and micro structure analysis on hardening accelerator for development of super high early strength concrete. The research results showed that hardening accelerator produced $Ca(OH)_2$ when hydrated with cement, enhancing the degree of saturation of Ca ion by using differential thermal analysis. Moreover, porosity was reduced rapidly as capillary pores were filled by hydration products of $C_3S$. According to the experiment using hydration measurement testing, when 1% and 3% of accelerator were mixed, hydration rate increased toward the second peak point compared to high early strength cement, before the first peak point disappeared. It turned out that adding accelerator accelerated the hydration rate of cement, especially $C_3S$. The shape of C-S-H is shown depending on the amounts of accelerator added and the production and age of $Ca(OH)_2$ by using SEM to observes hydration products. Therefore, it's evident that hardening accelerator used in this research increases amounts of $Ca(OH)_2$ and accelerates $C_3S$, it is effective for the strength development on early age.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.973-983
• /
• 2015

To improve the control performance of the IPMSM, a novel nonlinear disturbance observer is proposed by using the T-S fuzzy model. A T-S fuzzy model is the combination of local linear models considered at each operating point. Usually the inverse model is easy to obtain in linear systems but not in nonlinear systems. To design a nonlinear disturbance observer, a nonlinear inverse model is obtained based on nonlinear inverse model which is the fuzzy combination of the local linear inverse models. The proposed DOB is used with a PDC controller which is one of the T-S fuzzy controller, and its performance improvement is shown from the simulation results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.43-46
• /
• 2018

This paper has designed a wideband bandpass filter (WBSF : Wide Band Stop Filter) using a stepped impedance resonator (SIR : Stepped Impedance Resonator) with improved performance and improved hairpin coupling structure. The SIR WBSF is small in size and has the advantage of having excellent bandstop characteristics. The designed BSF has a structure in which a quadrangular shaped hairpin of a / 4 length is arranged symmetrically on the upper and lower sides of the input and output transmission lines. The input and output terminals were terminated at 50 ohms for system applications. The center frequency of the SIR WBSF is 6.3 GHz, which is the second harmonic of 3.15 GHz. The designed filter has a 3dB bandwidth of 2.9 GHz and a transmission coefficient ($S_{21}$) of 33.2 dB. The reflection coefficient ($S_{11}$) at the center frequency is 0.106 dB. The application field is used for fixed microwave relay stations, fixed satellite and earth stations, and fixed satellite communications. The overall size is $20mm{\times}10mm$.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.9-27
• /
• 2006

The East Asian (China, Korea and Japan) summer monsoon precipitation and its variability are examined from the outputs of the 22 coupled climate models performing coordinated experiments leading to the Intergovernmental Panel on Climate Change Fourth Assessment Report (IPCC AR4) following the multi-model ensemble (MME) technique. Results are based on averages of all the available models. The shape of the annual cycle with maximum during the summer monsoon period is simulated by the coupled climate models. However, models fail to simulate the minimum peak in July which is associated with northward shifts of the Meiyu-Changma-Baiu precipitation band. The MME precipitation pattern is able to capture the spatial distribution of rainfall associated with the location of the north Pacific subtropical high and the Meiyu-Changma-Baiu frontal zone. However precipitation over the east coast of China, Korea-Japan peninsular and the adjoining oceanic regions is underestimated. Future projections to the radiative forcing of doubled $CO_2$ scenario are examined. The MME reveals an increase in precipitation varying from 5 to 10 %, with an average of 7.8 % over the East Asian region at the time of $CO_2$ doubling. However the increases are statistically significant only over the Korea-Japan peninsula and the adjoining north China region. The increase in precipitation may be attributed to the projected intensification of the subtropical high, and thus the associated influx of moist air from the Pacific to inland. The projected changes in the amount of precipitation are directly proportional to the changes in the strength of the subtropical high. Further a possible increase in the length of the summer monsoon precipitation period from late spring through early autumn is suggested.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.367-375
• /
• 2011

Succinic acid ester derivatives have been used as additives for the base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-esters were synthesized with over 97% yields by ring-opening reaction of succinic anhydride and fatty alcohol and were soluble in 100 N base oil within 1 wt% concentration. The structures and purities of ester derivatives were confirmed by $^1H-NMR$ and FT-IR spectrum and GC analysis. Anti-corrosion properties of the esters in sea water were evaluated through ASTM D665 method and weight loss method and compared to that of succinic alkyl esters without carboxylic acid group in the molecule. As the results, anti-corrosion properties of succinic acid alkyl half-esters with carboxylic acid group were better than those of succinic acid alkyl esters without carboxylic acid group. And, Anti-corrosion properties of the esters with a shorter alkyl chain of high concentration showed better performance than those with longer alkyl chain of low concentration. Inhibition efficiency % (IE%) of the esters was over 95% in the concentration of 80 ppm and corrosion rate (CR) was below 0.3 mm/year at the same concentration. Thus, the corrosion properties of succinic acid alkyl half-esters result from the carboxylic acid groups in molecules.