• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.307-309
• /
• 2014

• 전기의세계
• /
• v.53 no.6
• /
• pp.49-54
• /
• 2004

현재의 철도, 도로망 등의 각 중심측 및 간선측의 주요 교통시설은 이미 포화 상태가 되어 물류비용의 증가를 초래하고, 배기 가스를 비롯한 환경오염 문제를 유발하고 있기 때문에 이에 대한 해결방안이 시급한 실정이다. 이러한 상황에서 고속전철은 대기 오염을 일으키지 않으면서 신속$.$대량 수송이 가능하여 교통량을 대량으로 흡수할 수 있는 주요 교통 수단으로 인식되고 있다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.142-143
• /
• 2011

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.119-122
• /
• 2010

본 논문에서는 틸팅열차의 안전성 확보 및 운행효율 향상을 위해 "한국형 틸팅열차 신뢰성 평가 및 운용기술개발" 연구과제의 한 분야로 추진된 ATP 차상장치의 설치 및 시운전시험에 대한 내용 및 결과를 제시하고 있다. 한국철도기술연구원에서는 기존선의 속도 향상과 KTX 비수혜지역의 여객 서비스 향상을 위해 틸팅열차를 개발하였으며 개발된 틸팅열차의 신뢰성 평가를 위해 기존에 사용되고 있는 ATS 장치에 의한 10km 주행 시운전 시험을 진행하였다. 국토해양부에서는 KTX가 운행되지 않는 지역인 중앙선 및 충북선을 비롯한 7개 기존 노선을 200km/h 이상으로 고속화하기로 하였으며, 이에 따라 열차제어시스템은 기존의 ATS 장치에서 ATP 장치로 개량하여야 한다. 따라서 틸팅열차에도 ATP 차상장치를 설치하여 운행 적합성을 확인하여야 하기 때문에 한국철도공사의 경부선 및 호남선 ATP 구축사업에 사용된 것과 동일한 ATP 차상장치를 틸팅열차에 설치하여 시험하였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.371-375
• /
• 2010

In order to decide the strength requirement of the window glass for the high-speed train, the pressure change during the passage of the EMU type high-speed train has been numerically simulated. Based on the calculation results, the pressure difference between the inner and outer pressure of the cabin has been calculated to yield the amount of load acting on the window glass of the cabin. To simulate the pressure field generated by the high-speed train passing through the tunnel, computational fluid dynamics based on the axi-symmetric Navier-Stokes equation has been employed. The pressure change inside a train has been calculated using first order difference approximation based on a linear equation between the pressure change ratio inside a train and the pressure difference of inside and outside of the train.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1110-1116
• /
• 2017

Depending on the operating characteristics, track circuit is installed for the purpose of direct or indirect control of the signal device, point switch machine and other security device. These are mainly used for train detection, transmission of information, broken rail detection and transmission of return current. Especially, the return current is related to signal system, power system and catenary line, and track circuit systems. It is one of the most important component shall be dealt for the safety of track side staff and for the protection of railway-related electrical system according to electrification. Therefore, an accurate analysis of the return current is needed to prevent the return current unbalance and the system induced disorder and failure due to an over current condition. Also, if the malfunction occurred by the return current harmonics, it can cause problems including train operation interruption. In this paper, we presented measurement and analysis method at return current and it's harmonics by high speed train operation on the honam high speed line.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.459-462
• /
• 2005

The KHST(Korean High Speed Train) which had been developed by through 'G7-R&D project' has succeeded trial running test up to 350km/h on the Kyoung-Bu High Speed Track in December 16th, 2004. In order to evaluate the function and characteristics of KHST, various experimental conditions have been considered and conducted. In this paper, measured current collection characteristics and dynamic behaviors of KHST's pantograph are analysed over 300 to 350km/h in running speed of KHST. A measuring system developed and installed on the KHST for measuring the performance and mechanical characteristics of the KHST's pantograph was used for this trial running test and eventually, we proofed that KHST has a remarkable and stable current collection characteristics as it had been designed.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.342-347
• /
• 2005

The Korean High-Speed Train(HSR 350x) had been developed by through 'G7-R&D project' in 1996-2002, and has been testing and evaluating it's reliability on the high-speed line until now. A number of core equipments designed and developed by using domestic technologies were boarded on the HSR 350x. In order to verify the performance of HSR 350x and core equipments such as traction system, brake system and pantograph, sophisticated testing and evaluating procedures should be considered and applied. In this paper, the tested and analysed results about the dynamic characteristics of HSR 350x pantograph are introduced in a view point of the mean contact force and it's variation trend, criterion of current collection, and up-lifting of contact wire when the MSR 350x running up to 350 km/h. Through the test and evaluation, we verified that HSR 350x pantograph had an excellent current collection performance and good dynamic characteristics as it had been designed.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.660-664
• /
• 2007

Korea High-speed Railway (HSR-350x) was developed by Korean government, several institutes, and related companies. HSR-350x was investigated its performance and tested at the high speed line. In 2004 December, HSR-350x was run over 350km/h and proved its running performance. And Korean Train Express (KTX) served the commercial traffic for 4 years. These high speed railways have 12 motors to transfer the traction effort or the braking force. To obtain the load of the transfer shaft, it is necessary to measure the transferred torque of the shaft. In this paper, authors propose the construction the measurement system fur monitoring the force transferred to the train from the motor The system was installed to the tripod shaft which is located between the reduction gears and it measures the mechanical load directly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.318-321
• /
• 2005

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, an evaluation method for crashworthiness of Korean tilting train express is introduced. Crush characteristics for each part of tilting train express are evaluated numerically through 3-dimensional shell element analysis with LS-DYNA. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of tilting train express are evaluated numerically using full-rake collision simulations.