• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.190-197
• /
• 1997

This study was conducted to determine the optimum hydroponic system and nutrient solution for promoting the growth and flowering of hydroponically grown carnation. DFT (deep flow technique) and NFT (nutrient film technique) systems were employed and four kinds of nutrient solution, which are Cooper solution, Yamasaki solution, balanced nutrient solution by Japanese Horticultural Experiment Station and PTG solution in the Netherlands were used and compared. pH was lowest in the PTG solution compared to the other nutrient solutions used. Plant height was highest in the DFT system in the plot of PTG solution as of 53.0 cm at 88 days after transplanting, while lowest in NFT system with Cooper solution. Stem diameter was more thickened in NFT system with PTG solution as of 7.2 mm at 88 days after transplanting. Days to flowering was shortened to 122.3 days in NFT system when PTG solution was used. This results suggested a combination of NFT system with PTG solution as optimum hydroponic system and nutrient solution for cut carnation production. Further trials as to the management of nutrient solution by glowing stages should be followed.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.557-567
• /
• 2007

In underground parking lots of apartment housing, the story height is increased by $300{\sim}400mm$ because of various ducts for HVAC. In order to reduce this story height, this study proposed the 'hybrid beam', which is composed of PC beam with embedded steel beam and insitu concrete. The depth of the hybrid beam is reduced by 300 mm and then the steel beam is embedded over the length of reduced depth to compensate for the loss of strength. Then, we performed the large-scale structural tests on 9 specimens and investigated the flexural behavior of the specimens. The parameters of tests were the shape of steel beam section, the length of the reduced depth, the stage of construction, the effects of slab and shear connectors. The test results showed that the specimens, after the insitu concrete has cured, has the flexural capacity which exceeds the required design capacity regardless of other parameters. On the other hand, the specimens of construction stage do not have sufficient strength. Based on these results, it is thought that the proposed hybrid beam with reduced depth is applicable to the underground parking lots of apartment housing as long as the support is placed at construction stage.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• Korean Journal of Cognitive Science
• /
• v.27 no.2
• /
• pp.275-301
• /
• 2016

Attentional blink (AB) refers to the phenomena where conscious report for a target (T2) subsequent to the first target (T1) in a stream of items under rapid serial visual presentation (RSVP) becomes difficult if the T2 follows no later than 500ms after the T1. The present study examined the effect of T1 visibility on T2 AB strength according to the bottleneck account proposing that the amount of allocated resources for T1 memory consolidation determines the strength of AB against T2. In the low-visibility condition, the T1 had a gray color for a low stimulus contrast against the black background whereas had a bright and saturated color in the high-visibility condition. In both visibility conditions, the T1 was also highly distinct from the remaining distractors. A multi-RSVP method was also used for increasing location uncertainty of the targets supposedly consuming on average attentional resources for the targets. Two experiments revealed that AB strength was more intense in the low-visibility than high-visibility condition, and the pattern of difference went more pronounced if T2 visibility was improved. The results indicate that T1 visibility can affect more strongly when attentional resources are relatively lacking for resolving the T1 bottleneck, and support for the bottleneck account proposing that the level of T1's visibility can determine the intensity of the T1 bottleneck.

• Korean Journal of Cognitive Science
• /
• v.26 no.4
• /
• pp.393-433
• /
• 2015

Creativity refers to the ability to generate novel and useful ideas. Understanding the mechanism of creativity and its enhancement is important in order to solve major problems of the modern society and to improve the wellness of mankind. Creativity is a highly heterogeneous and complex ability which should not be conceptualized as a single entity. Thus, the current literature on creativity is based on a component process approach to creativity. The present study introduces cognitive neuroscience research studying the mechanism of divergent thinking, insight, relational thinking and artistic creativity which are the major components of creativity. Based on an expansive review, the early hypothesis of hemispheric asymmetry emphasizing the importance of the right as opposed to the left hemisphere is not supported by scientific evidence. In addition, there is no consensus or consistency on which specific brain region is related to a certain component of creativity. In fact, there is a mixture of studies reporting involvement of various brain regions across all four lobes of the brain. This inconsistency in the literature most likely reflects heterogeneity of the component processes of creativity and sensitivity of the neural response to differences across tasks and cognitive strategy. The present study introduces examples of representative studies reporting seminal findings on the neural basis and the enhancement of creativity based on innovative methodology. In addition, we discuss limitations of the current cognitive neuroscience approach to creativity and present directions for future research.

• Korean Journal of Cognitive Science
• /
• v.22 no.4
• /
• pp.469-494
• /
• 2011

It is well known that visual objects belonging to the same perceptual category compete for category-specific, limited-capacity attentional resource. However, it remains to be seen how perceptually identical objects interact with each other during visual analyses. Perceptually identical objects might suppress each other as much as categorically identical objects do. Alternatively, they might cooperate to generate a perceptual representation which is long lasting and robust to noise. Such possibilities were tested in the current research with three behavioral experiments using the Stroop task. As results, relative to a single distractor, Stroop interference was diluted by two different distractors of a category while it was enhanced by two perceptually identical distractors (Experiment 1). This redundancy effect disappeared when two different distractors associated with the same response were presented (Experiment 2), and it was not affected by the between- vs. within-hemisphere distractor presentations (Experiment 3). These findings indicate that the redundancy effect of distractors may be mediated by perceptual representations based on hemisphere-independent attentional resources. Overall, the current study supports the hypothesis that Stroop interference is constrained by category-specific attentional resources and further suggests that redundant presentations of a stimulus overcome such attentional constraints by facilitating perceptual processing.

• Korean Journal of Cognitive Science
• /
• v.22 no.4
• /
• pp.365-384
• /
• 2011

A recent study of visual working memory(VWM) under a change detection paradigm proposed an idea that the comparison process of VWM representations against incoming perceptual inputs can be performed more rapidly than the process of forming durable memory representations into VWM. To test this hypothesis, we compared the size of interference effect caused by pattern-backward masks following after either the sample(sample-mask condition) or test items (test-mask condition). In Experiment 1, subjects performed a color change detection task for four colored-boxes, and pattern masks with mask-onset asynchronies(MSOA) of either 64ms or 150ms followed each item location either after the sample or after the test items. The change detection accuracy was both comparable in the sample-mask condition regardless of the MSOAs, whereas the accuracy in the trials with a MSOA of 150ms was substantially higher than the MSOA of 65ms in the test-masking condition. In Experiment 2, we manipulated setsizes to 1, 2, 3, 4 items and also MSOAs to 117ms, 234ms, 350ms, 484ms and compared the pattern of interference across a variety of setsize and MSOA conditions. The sample-mask condition yielded a pattern of masking interference which became more evident as the setsize increases and as the MSOA was shorter. However, this pattern of interference was less apparent in the test-mask condition. These results indicate that the comparison process between remembered items in VWM and perceptual inputs is less vulnerable to interference from pattern-backward masking than VWM consolidation is, and thus support for the recent idea that the comparison process in VWM can be performed very fast and accurately.

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.397-406
• /
• 2008

Despite the effectiveness of oriental medical practice in the diagnosis of symptoms and providing cure to it, the preferences in western medicinal values is socially prevalent. The diagnosis of a disease using western medicinal practices provides us with an objective diagnostic result, however, decisions by oriental doctors are based on their heuristic intuitions developed by practice and experience. Objective solutions for the cure of symptoms using oriental medical therapy can have a high impact on the world market. Therefore, development of diagnostic machines based on oriental therapy can enhance the Ocular Inspection which is evaluated as one of the best diagnostic treatment among Oriental Medical Science, is not researched much compared to other diagnoses. Because there is no color diagnosis rules for digital machines to analyze the actual color, looking at the person's face color is one of the most important components to diagnose the disease or illness. The thesis proposes the implementation of absolute observing a person's face color standards of the color settings for objective diagnosis. As a results, comparative digital color analysis for observing a person's face color can be the most effective rule based Color scheme system to diagnose disease. A standard solution for the researching conditions is suggested to reduce the variable which may occur depending on the differences between the researching conditions.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.6
• /
• pp.279-290
• /
• 2013

In digital forensics log files have been stored as a form of large data for the purpose of tracing users' past behaviors. It is difficult for investigators to manually analysis the large log data without clues. In this paper, we propose a text mining technique for extracting intrusion logs from a large log set to recommend reliable evidences to investigators. In the training stage, the proposed method extracts intrusion association words from a training log set by using Apriori algorithm after preprocessing and the probability of intrusion for association words are computed by combining support and confidence. Robinson's method of computing confidences for filtering spam mails is applied to extracting intrusion logs in the proposed method. As the results, the association word knowledge base is constructed by including the weights of the probability of intrusion for association words to improve the accuracy. In the test stage, the probability of intrusion logs and the probability of normal logs in a test log set are computed by Fisher's inverse chi-square classification algorithm based on the association word knowledge base respectively and intrusion logs are extracted from combining the results. Then, the intrusion logs are recommended to investigators. The proposed method uses a training method of clearly analyzing the meaning of data from an unstructured large log data. As the results, it complements the problem of reduction in accuracy caused by data ambiguity. In addition, the proposed method recommends intrusion logs by using Fisher's inverse chi-square classification algorithm. So, it reduces the rate of false positive(FP) and decreases in laborious effort to extract evidences manually.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.367-378
• /
• 2015

This study was directed at the design of a hybrid algorithm for competition relation extraction. Previous works on relation extraction have relied on various lexical and deep parsing indicators and mostly utilize only the machine learning method. We present a new algorithm integrating machine learning with various filtering methods. Some simple but useful features for competition relation extraction are also introduced, and an optimum feature set is proposed. The goal of this paper was to increase the precision of competition relation extraction by combining supervised learning with various filtering methods. Filtering methods were employed for classifying compete relation occurrence, using distance restriction for the filtering of feature pairs, and classifying whether or not the candidate entity pair is spam. For evaluation, a test set consisting of 2,565 sentences was examined. The proposed method was compared with the rule-based method and general relation extraction method. As a result, the rule-based method achieved positive precision of 0.812 and accuracy of 0.568, while the general relation extraction method achieved 0.612 and 0.563, respectively. The proposed system obtained positive precision of 0.922 and accuracy of 0.713. These results demonstrate that the developed method is effective for competition relation extraction.