• Journal of Life Science
• /
• v.12 no.6
• /
• pp.821-834
• /
• 2002

In order to measure the inter- and intraspecific genetic divergences within the genus Alexandrium, the variations within the internal transcribed spacer (ITS1 and ITS2) regions and 5.85 ribosomal RNA gene of eight Alexandrium species were examined for 33 strains from diverse geographical locations by direct sequencing. Five isolates of A. tamarense (AT-2, AT-6, AT-10, AT-A and AT-B) from Jinhae Bay, Korea were found to be completely identical to a Japanese strain OFX151-A. The length of the amplified ITSI-5.85-ITS2 region varied from 481 nucleotides (in A. margalefi) to 528 nucleotides (in A. affine CU1-1). ITS1 and ITS2 nucleotide lengths were negatively correlated, whereas a positive correlation was found between their G＋C content. The degree of sequence divergence ranged from 0.3% (1 bp) to a maximum of 53% (305 Up). Pairwise sequence comparisons revealed a small degree of divergence between A. tamarense and A. Pundyense isolates (1.2 - 2.3% ＝ 6-12 bp), but a high degree of divergence between A. tamarense and A. catenella (19.8% ＝ 102 bp), and between A. catenella and A. Pundyense (19.7%). Although most nodes were weakly supported by bootstrap values, some types tend to form independent molecular groups. A. catenella isolates also formed an independent molecular sub-group, with relaticula strong bootstrap values (94% or 85% and 79% or 98%, respectively in PAUP and NJ trees). Interestingly, A. cohorticula and A. frateculus always clustered within the same sub-group, this result being supported by strong bootstrap values. Our results indicate that the ITS regions provide useful informations on hierarchical population genetic structure and a high phylogenetic resolution in intraspecific and interspecific Alexandrium population.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.891-899
• /
• 2013

This paper suggests a test and evaluation procedure of conformal load-bearing antenna structure(CLAS) for high speed military jet application. A log periodic patch type antenna was designed for multi-band communication and navigation antenna. Carbon/Glass fiber reinforced polymer was used as a structure supporting aerodynamic loads and honeycomb layer was used to improve antenna performance. Multi-layers were stacked and cured in a hot temperature oven. Gain, VSWR and polarization pattern of CLAS were measured using anechoic chamber within 0.15~2.0 GHz frequency range. Tension, shear, fatigue and impact load test were performed to evaluate structural strength of CLAS. Antenna performance test after every structural strength test was conducted to check the effect of structural test to antenna performance. After the application of new test and evaluation procedure to validate a new CLAS, a design improvement was found.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.1061-1067
• /
• 2012

Rice cake is the most historical food which has been developed from settlement of agriculture and typical traditional food which has manufacture and food historical meaning. Because, the process of rice flour, raw ingredient of rice cake, tells remarkable food processing technology of our nation, and is original form of processed food that we has been taken before agricultural life begun. In this study, contents analysis method is used. Ingredients of rice cakes appeared in "Gyuhapchongseo" glutinous rice 12 times (42.8%), nonglutinous rice 10 times (35.7%), and the others 6 times (21.4%) used as the main ingredients of rice cake. the rice cake separated into 15 types (53.5%) of steamed rice cake, 2 types (7.1%) of pounded rice cake, 3 types (10.7%) of boiled rice cake, 7 types (25%) of sauteed rice cake, and 1 types (3.5%) of the others. it become data for knowing social and dietary culture of the time. And it is for presenting fundamental material of possibility of modern rice cake.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2009

This paper investigates inelastic lateral-torsional buckling of stepped beams subjected to uniformly distributed load and end moments. A three-dimensional finite-element program ABAQUS (2007) and a regression program MINITAB(2006) were used to analytically develop new design equation for singly and doubly stepped beams with simple boundary condition. The flanges of the smaller cross-section in the stepped beams were fixed at 30.48 by 2.54 cm, whereas the width and thickness of the flanges of the larger cross-section varied. The web thickness and height of the beams were kept at 1.65 cm and 88.9 cm, respectively. The ratios of the flange thickness, flange width, and stepped length of beam are considered with analytical parameters. Two groups of 27 cases and 36 cases, respectively, were analyzed for doubly and singly stepped beams in the inelastic buckling range. The combined effects of residual stresses and geometrical imperfection on inelastic lateral-torsional buckling of beams are considered. The distributions of residual stress of the cross-section is same as shown in Pi and Trahair (1995) and the initial geometric imperfection of the beam is set by central displacement equal to 0.1% of the unbraced length of beam. The comparisons between results from proposed equations and the results from finite element analyses were presented in this paper. The maximum differences of two results are of 13% for the doubly stepped beam and 10% for the singly stepped beam. The proposed equations definitely improve current design methods for the inelastic lateral-torsional buckling problem and increase efficiency in building and bridge design.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.511-522
• /
• 2014

In this study, an innovative steel stair system is presented which enables rapid erection and high quality control in both residential and office building construction. This system features two lightweight steel stringers of box shape, bolted connections easy to absorb construction tolerance, and stair steps movable transversely (or sliding steps) such that the work space needed for concrete stairway wall could be easily provided. In this type of stairway system, other than providing robust connecting details, ensuring vibration performance is especially important since this system may be vibration-sensitive due to lightweight nature and/or probable low damping. To tackle these issues, a series of full-scale mock-up tests were conducted by using box-shape stringer members with or without concrete-fill. The connection system was shown to be sufficiently stiff and strong, or it remained elastic even under the 160% of service load level. Among the seven stringer alternatives, five exhibited satisfactory vibration performance according to the related North American and European acceptance criteria.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.621-632
• /
• 2007

The purpose of this study was the estimation and formulation of orthotropic flexural rigidities considering the deformed shape for a plate stiffened with rectangular ribs. Analytical results of methods modifying the flexural rigidity of the x-direction, the y-direction or both directions were compared at the center, the x-directional quarter point and the y-directional quarter point of stiffened plates loaded at the center. The composite method modifying the flexural rigidity of both directions improves the accuracy compared with the other methods. Moreover, the ratio of modified coefficients for each directional rigidity can be expressed as a function corresponding to each dimension of stiffened plates. The application of modified coefficient functions to various types of stiffened plates with different boundary conditions, aspect ratios and rib arrangement shows that the increment of the error ratio is small compared with examples of this study and the application of proposed functions shows more accurate results than previous methods modifying the flexural rigidity. Therefore, by using the modified coefficient functions proposed in this study, the orthotropic plate analysis of plates stiffened with rectangular ribs can easily achieve more accurate displacement results.

• Journal of Veterinary Clinics
• /
• v.28 no.6
• /
• pp.566-570
• /
• 2011

The objective of this study was to assess the complications of titanium clip application after ovariohysterectomy (OHE) and find the proper surgical technique to minimize the complications by comparing the ligation method of ovarian pedicle. Six female beagle dogs were used for this study and they were divided randomly into two groups by ligation techniques: ligation and non-ligation of the suspensory ligament of ovary including ovarian pedicle. To evaluate the difference between two techniques, the location and embedded pattern of applied clips in the abdominal cavity were identified through radiographic tests and autopsy. Hematology tests were also performed to check the existence of inflammation by applied clips and all tests were carried out monthly for 1 year. There were few changes in location of clips of both groups on X-ray views without any migration. Almost all values in hematology of two groups were within the normal range and there were no inflammatory symptoms. All of applied clips in two groups were found near the kidney, but the embedded forms of them showed slight differences. The clips ligating suspensory ligament and ovarian pedicle were located in deep place and thickly surrounded with thin layers of peritoneum. But the clips ligating only ovarian pedicle were found with ease on surface of layer and located in lower place compared with the clips ligating suspensory ligament. These results indicate that the suspensory ligament holds applied clips and minimizes the movement of them. Therefore, ligation of suspensory ligament would be the preferred technique in titanium clip application for OHE.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1217-1223
• /
• 2007

Advanced microwave absorbers for wide oblique incidence angles are required in many applications including wireless communication or vehicle identification in ITS(Intelligent Transport System) where 5.8 GHz DSRC(Dedicated Short Range Communication) system is applied. In this study, two-layered microwave absorber(with a laminate structure of dielectric/magnetic composites) has been designed for the achievement of low reflection coefficient over wide incidence angles at 5.8 GHz. Iron flake particles are used as the filler in the absorbing layer, and the magnetic composite sheet exhibits high magnetic loss due to ferromagnetic resonance in gigahertz frequencies. The surface layer of low dielectric constant containing small amount of carbon black is used as the impedance transformer. On the basis of transmission line theory, the reflection loss has been calculated for the two-layer structure with variation of incident angles for both TE(Transverse Electric) and TM(Transverse Magnetic) polarizations. At the optimum thickness of the composite layers, a low value of reflection loss(less than -10 dB) has been predicted for wide incidence angles up to $55^{\circ}$ which is in good agreement with the measured value determined by free-space measurement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4935-4944
• /
• 2010

The purpose of this study was to investigate the perceived difficulties during both pre-treatment period and admission period for radioactive iodine therapy (RAIT), the level of information about RAIT provided by medical staffs and the satisfaction of RAIT process in thyroid cancer patients receiving RAIT. Participants were 165 thyroid cancer patients, who had total thyroidectomy and had been offered RAIT. The data were collected using structured questionnaire and open-ended questions and analyzed by descriptive statistics and content analysis. The most frequent perceived difficulties of RAIT was associated with thyroid specific symptoms during both pre-RAIT period and RAIT admission period(38.2% vs 43.0%). The rating of RAIT information provided by medical staffs was evaluated as over moderate level(mean $3.63{\pm}0.80$). The RAIT process satisfaction was investigated as moderate level(mean $6.43{\pm}2.21$). the satisfaction of RAIT was the highest in medical attention and coping procedure (mean $7.64{\pm}2.37$) however it was the lowest in adequacy of RAIT information(mean $5.67{\pm}2.78$). Thus the nursing intervention program for thyroid cancer patient undergoing RAIT should be developed to support needs of thyroid cancer patients related to thyroid specific symptoms and to improve patients' understanding about RAIT procedure so that patients have competence to participate in therapeutic activities efficiently.