• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.449-453
• /
• 2021

Interest and investment in renewable energy have increased worldwide, highlighting the need for renewable energy. Solar energy was the most promising energy of all renewable energy sources, and it has the highest investment value. Because photovoltaics require a certain amount of area for installation, high density and high output performance are required. Shingled module is a promising technology in that they are featured by higher density and higher output compared to the conventional modules. Shingled technology uses a laser scribing to divide solar cells that are to be bonded with electrically conductive adhesive (ECA) to produce and connect strings, which has a higher output in the same area than the conventional modules. In the process of producing solar modules, metal ribbons are used to interconnect cells, but they are also needed for string connections in shingled solar cells. Accordingly, in this study, we researched the interconnection that best suits the connector that joins the string to the string. The module outputs produced under the conditions of the string interconnection were compared and analyzed.

• 한국주조공학회지
• /
• 제41권5호
• /
• pp.445-453
• /
• 2021

다양한 합금계에 대한 계산열역학은 CALPHAD 기법으로 잘 알려져있다. 실험적으로 측정된 열역학 특성들을 활용하여 각 상에 대한 Gibbs 에너지 모델 파라미터들을 구하여, 주로 실험적으로 측정되지 못한 영역에 대한 예측이나 실험 결과에 대한 열역학 해석에 활용되고 있다. 본 연구에서는 내열 주조 합금 (IN-657)이 장시간 사용 후에 일정 영역에서 파괴되는 현상의 열역학적 해석을 위해 Ni-Cr-Nb-C 사원계 시스템의 열역학 모델링을 수행하였고, Cr 함량에 따른 시스템의 안정상, 온도에 따른 상분율 및 Ni₂Cr상의 long range ordering 파라미터를 계산하였고 실험결과와 비교하였다. 계산된 열역학 물성들은 실험으로 보고된 파괴온도 영역 및 해당 영역에서 생성된 안정상에 대한 결과를 잘 설명한다. CALPHAD 기법을 통한 열역학 모델링은 다양한 주조 합금의 열역학적 거동을 해석하고 예측하는데 유용하게 사용될 수 있을 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제34권12호
• /
• pp.59-69
• /
• 2018

한계평형법 이론들을 사용하기 위해서는 극한 파괴 상태에서 나타나는 파괴 전단면을 찾아야 한다. 강도 감소법에서는 유한요소해석의 수치해가 일정 반복 횟수 이내에 수렴하지 못하는 시점을 극한 파괴 상태로 정의한다. 하지만 Coupled Eulerian-Lagrangian (CEL)기법을 유한요소해석에서 사용하면 극한 파괴 상태에 도달하여도 수치해의 비수렴 상황이 발생하지 않으므로 이러한 정의는 사용하기 어렵다. 본 연구에서는 CEL 기법을 이용한 유한요소해석에서 지반의 극한 파괴 상태를 감지할 수 있는 객관적인 물리량 기준을 제시하였다. 비배수 조건의 연약지반이 연속기초 하중을 받는 경우 극한 파괴 상태에 해당하는 이론적 하중에서 소성 소산 에너지의 변화속도가 민감하게 변화함을 찾을 수 있었다.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.497-504
• /
• 2019

In this study, the correlation between microstructure and Charpy impact properties of FCAW(Flux cored arc welding) HAZ(Heat affected zone) of thick steel plates for offshore platforms was investigated. The 1/4 thickness(1/4t) location HAZ specimen had a higher volume fraction of bainite and finer grain size of acicular ferrite than those of the 1/2 thickness (1/2t) location HAZ specimen because of the post heat effect during the continuous FCAW process. The Charpy impact energy at $-20^{\circ}C$ of the 1/4t location HAZ specimen was lower than that of the 1/2t location HAZ specimen because of the high volume fraction of coarse bainite. The Charpy impact energy at -40 and $-60^{\circ}C$ of the 1/2t location HAZ specimen were higher than those of the 1/2t location HAZ specimen because the ductile fracture occurred in the fine acicular ferrite and martensite regions. In the ductile fracture mode, the deformed regions were observed in fine acicular ferrite and martensite regions. In the brittle fracture mode, long crack propagation path was observed in bainite regions.

• 실천공학교육논문지
• /
• 제10권2호
• /
• pp.103-111
• /
• 2018

본 연구는 4차산업직종 교육훈련방식 변화 요구에 맞춰 플립러닝 운영사례를 적용해봄으로써 직업교육훈련방식의 변화가능성과 교수학습 지원의 시사점을 제시하는데 목적이 있다. 이를 위해 공공직업교육기관인 P대학 융합기술교육원 임베디드 시스템과, 대졸자 대상 직업교육훈련과정 중 총 2개의 학습모듈에 플립러닝 전략을 적용하여 시범운영 수업을 진행하였다. 그 결과, 플립러닝 적용에 대한 학습만족도는 평균 4.0, 수업추천 의향은 평균 4.2로 나타났으며, 기존 강의식수업과 비교했을 때, 교육훈련생 56.1%가 플립러닝 수업에서 몰입도가 더 높았고, 교육훈련생 36.9%가 학습 에너지는 더 소모된다고 응답하였다. 이상의 결과를 바탕으로 4차산업직종 교육훈련방식 적용을 위한 사전학습 참여에 대한 제도의 필요성, 플립러닝 지원을 위한 교수학습 역량강화 방안을 제안하였다.

• 한국식품영양학회지
• /
• 제33권6호
• /
• pp.624-630
• /
• 2020

This study examined the quality characteristics of Makgeolli to investigate the availability of Korean sweet potato cultivars as alcoholic beverages. The following sweet potato varieties were used: Gogunmi, Daeyumi, Shingunmi, Shinyulmi, Shincheonmi, Jinyulmi, Jinhongmi, Jeungmi and Pungwonmi; their alcohol contents ranged from 12.20% to 14.20%, with the lowest value in Makgeolli made with Jeungmi and the highest value in Makgeolli made with Jinhongmi. The DPPH radical scavenging activity was in the range of 37.51~77.02%, with the lowest value in Makgeolli made with rice (control) and the highest value in Makgeolli made with Gogunmi. As a result of analyzing the aroma component of sweet potato Makgeolli, 27 kinds of aroma components were detected, and six kinds of alcohols, 13 kinds of esters, four kinds of acids, and four kinds of other compounds were found. Regarding the number of aroma compounds, Makgeolli made with Shinyulmi showed the lowest number with 14 kinds, while Makgeolli made with Pungwonmi showed the highest number with 27 kinds.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.281-291
• /
• 2022

Global warming is accelerating due to the use of fossil fuels that have been used continuously for centuries. Now, humankind recognizes its seriousness, and is conducting research on searching for eco-friendly and sustainable energy. In the field of solar energy, which is a kind of eco-friendly and sustainable, many studies are being conducted to enhance the output performance of the module. In this study, the output improvement for the shingled module structure was studied. In order to improve the output performance of the module, the thickness of the encapsulant was increased, and the lamination process conditions have been improved accordingly. After that, the crosslinking rate was analyzed, and the suitability of the lamination process conditions was judged using this. In addition, a peeling test was conducted to analyze the correlation between the adhesion of the encapsulant and the output performance of the module. Finally, the optimization for the encapsulant material and the lamination process conditions for high-power shingled modules was established, and accordingly, the market share of high-power shingled modules in the solar module market can be expected to rise.

• 한국물환경학회지
• /
• 제37권6호
• /
• pp.442-448
• /
• 2021

Seawater desalination is a technology through which salt and other constituents are removed from seawater to produce fresh water. While a significant amount of fresh water is produced, the desalination process is limited by the generation of concentrated brine with a higher salinity than seawater; this imposes environmental and economic problems. In this study, characteristics of seawater from three different locations in South Korea were analyzed to evaluate the feasibility of crystallization to seawater desalination. Organic and inorganic substances participating in crystal formation during concentration were identified. Then, prediction and economic feasibility analysis were conducted on the actual water flux and obtainable salt resources (i.e. Na2SO4) using membrane distillation and energy-saving crystallizer based on multi-stage flash (MSF-Cr). The seawater showed a rather low salinity (29.9~34.4 g/L) and different composition ratios depending on the location. At high concentrations, it was possible to observe the participation of dissolved organic matter and various ionic substances in crystalization. When crystallized, materials capable of forming various crystals are expected. However, it seems that different salt concentrations should be considered for each location. When the model developed using the Aspen Plus modular was applied in Korean seawater conditions, relatively high economic feasibility was confirmed in the MSF-Cr. The results of this study will help solve the environmental and economic problems of concentrated brine from seawater desalination.

• 문화기술의 융합
• /
• 제8권6호
• /
• pp.749-755
• /
• 2022

전기는 다양한 산업에 이용되는 등 현대 사회에 있어서 필수적인 에너지이다. 그러나, 이를 다루기 위한 전자배선 상에서 발생하는 화재의 비율이 매우 높다. 본 연구에서는 다양한 회귀 모델들을 사용한 분석을 통하여 전기 회로의 온도 변화를 예측하는 시스템을 구현하였다. 이를 위해 전기 회로를 제어하는 전자 접촉기 27종을 사용한 회로상의 온도 데이터를 수집하고 수집된 온도 데이터를 이용하여 회귀 모델들을 훈련하였다. 실험에서 실제 온도와 예측온도의 차이가 평균 4℃ 정도 발생하여, 이를 통해 충분히 사용 가능한 수준의 모델을 훈련할 수 있음을 확인하였다. 이와 같은 연구 결과는 전기 회로의 온도 예측 및 화재 예방에 도움이 될 것이다.

• 응용화학
• /
• 제15권1호
• /
• pp.37-40
• /
• 2011

A chemiluminescent method with silver nanoparticles for determination of L-alanine has been presented. The chemilumiscence intensity was further enhanced by silver nanoparticles in the luminol system by its catalytic role. The silver nanoparticles enhanced chemiluminescent method is applicable for the determination of an amino acid such as alanine. When alanine was introduced to the luminol system with silver nanoparticles, chemiluminescence intensity was reduced with the concentration of the added alanine. The effects of pH, concentrations of luminol, hydrogen peroxide and silver nanoparticles on the chemiluminescence intensity were investigated. The calibration curve for L-alanine was linear over the range from 6.60×10^-8 M to 4.00×10^-7 M, coefficient of correlation was 0.996 and detection limit was 3.5×10^-9 M under the optimal conditions of 4.0×10^-3 M, 4.0×10^-2 M, 4.0×10^-4 M, 12.8 for the concentration of luminol, H₂O₂, silver nanoparticles and pH, respectively.