• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.46-46
• /
• 2021

국제사회는 1992년 기후변화협약 체결 이후 지구온도 상승을 2℃이하로 억제하는 등 기후변화 문제를 해결하기 위해 노력하고 있다. 그러나 1997년 선진국(38개국) 중심으로 2020년까지 탄소감축(교토의정서)을 선언하였음에도 불구하고, 미국, 중국 등의 감축의무 미참여로 인해 기후변화대응에 대한 한계를 노출한 바 있다. 그 이후 COP21(2015년)에서 모든 국가에 감축의무를 부여하는 신(新)기후체제를 출범함으로써 선진국뿐만 아니라 개발도상국도 2020년부터 탄소감축의무를 부담하게 되었다. 영국은 기후변화위원회의 권고에 따라 탄소중립경제(Net-Zero Economy) 실현을 위해 국가적 탄소배출 목표를 발표(2019년)하고 온실가스 배출 'Zero'를 기후변화법에 명시하여 모든 산업 인프라 및 환경에 적용시키려 한다. 전 세계에서 최초로 영국의 물산업 분야는 'Net Zero 2030 Routemap'을 발표하여 물산업분야의 탄소중립 실현을 위해 다양한 정책적 로드맵과 실행방안(시나리오)을 수립하였다. 이러한 실행방안은 국가정책에 부합하고 자국내 물기업의 탄소저감 실행계획의 수립을 지원하는데 그 목적이 있다. 구체적인 실행방안은 탄소중립 달성을 위해 비용, 효과, 기술수준 및 기간 등을 고려하여, ①수요주도형, ②기술주도형, ③자연친화주도형, 그리고 ④복합형으로 제시하고 있다. 실행시나리오에 따르면, 수요주도형은 상하수도 분야 수요관리 및 기술, 설비의 효율화를 통한 배출 저감 방안으로 2018~19년 기준, 총배출량 2.41MtCO2e에서 2030년까지 0.54MtCO2e으로 약 77%의 감소효과를 기대하고 있다. 기술주도형의 경우, 심각한 탄소배출 분야의 기술개발 및 혁신을 통해 배출량을 최소화하는 시나리오이며, 총배출량(2.41MtCO2e)을 0.10MtCO2e(약 96%)까지 감소시키기 위한 방안이다. 자연친화주도형은 물기업의 자산 및 그 외 지역에 자연친화적 환경조성을 통한 탄소상쇄방안을 중심으로 총배출량을 0.88MtCO2e(약 63%)까지 저감하는 효과를 나타낸다. 마지막으로 복합협은 시나리오별 실효성과 적용시기를 고려할 때 가장 효과적인 방안으로 약 74%의 저감효과를 나타내지만, 시기적절성, 효과성에서, 가장 최적의 방안으로 제시되고 있다. 본 연구는 이러한 영국 물산업 분야의 탄소중립 정책과 실행방안 분석하고 그 시사점을 제시함으로써 국내 물산업 분야의 탄소중립을 위한 구체적 실행계획 수립에 이바지하고자 한다. 물산업 분야의 탄소중립은 기존 물산업 가치사슬 변화 등 물산업 생태계 전반의 변화를 초래할 것이며, 이러한 변화는 국내 물산업의 자본·운영시장의 비용증가에 대한 도전과 신재생에너지 기술 등 탄소 중립 기술 습득 및 새로운 일자리 창출 등 신(新)시장체계에 대한 기회가 동시에 상존한다.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.208-215
• /
• 1999

The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.483-490
• /
• 2022

Floating LiDAR is a system that provides a new paradigm for wind condition observation, which is essential when creating an offshore wind farm. As it can save time and money, minimize environmental impact, and even reduce backlash from local communities, it is emerging as the industry standard. However, the design and verification of a stable platform is very important, as disturbance factors caused by fluctuations of the buoy affect the reliability of observation data. In Korea, due to the nation's late entry into the technology, a number of foreign equipment manufacturers are dominating the domestic market. The west coast of Korea is a shallow sea environment with a very large tidal difference, so strong currents repeatedly appear depending on the region, and waves of strong energy that differ by season are formed. This paper conducted a study examining buoys suitable for LiDAR operation in the waters of Korea, which have such complex environmental characteristics. In this paper, we will introduce examples of optimized design and verification of ship-type buoys, which were applied first, and derive important concepts that will serve as the basis for the development of various platforms in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.203-216
• /
• 2021

Analyzing various wave interactions with oscillating wave surge converters (OWSC) is essential because they must be operated efficiently under a wide range of wave conditions and designed to extract optimal wave energy. In the conceptual design and development stage of OWSC, numerical analysis can be a good alternative as a design tool. This study performed a numerical analysis on the behavioral characteristics of the inverted triangle flap against the incident waves using open source CFD to examine the essential behavioral attributes of OWSC. Specifically, the behavioral characteristics of the structure were studied by calculating the free water surface displacement and the flap rotation angle near the inverted triangular flap according to the change of the period under the regular wave conditions. By comparing and examining the numerical analysis results with the hydraulic model experiments, the validity of the analysis performed and the applicability in analyzing the wave-structure interactions related to OWSC was verified. The numerical analysis result confirmed that the hydrodynamic behavior characteristic due to the interactions of the wave and the inverted triangle flap was well reproduced.

• Ocean and Polar Research
• /
• v.44 no.4
• /
• pp.297-310
• /
• 2022

To understand the chemical composition of aerosols in the Cheju-Korea Straits and their contribution to the ocean by deposition, aerosol samples were collected on board R/V Eardo from November 1997 to May 1999. The average concentrations of Al, NO₃^-, non-sea-salt (nss)-SO₄^2-, and NH₄⁺ in aerosols were 2.19, 5.59, 6.16 and 2.08 ㎍ m^-3, respectively. The Al concentration in the high yellow dust period was about 100 times higher than that in the non-yellow dust period. The concentration ratio of NO₃^-/nss-SO₄^2- ranged between 0.47 and 1.5, indicating that the aerosols in the Cheju-Korea Straits are under the effects of NO_x and SO_x emitted from China, Korea and Japan. The equivalent concentration ratio of [NH₄⁺]/[nss-SO₄^2-+ NO₃^-] with the average of 0.58±0.29 indicates that nss-SO₄^2- and NO₃^- are not neutralized by NH₄⁺. A high activity concentration of ²¹⁰Pb with 1.13-1.23 mBq m^-3 was observed during the high yellow dust period, indicating that ²¹⁰Pb is easily adsorbed in the yellow dust originating from the continent of Asia. The distribution of ⁷Be and NH₄⁺ concentrations showed a strong negative linear correlation during the low yellow dust period, April 1998. The total mineral dust flux in the Cheju-Korea Straits was estimated to be 1.21×10⁶ tons yr^-1, accounting for about 12% of the annual sediment discharge via the Nakdong River. The combined annual deposition of NH₄⁺ and NO₃^- was 0.103 mole N m^-2 yr^-1 was estimated to support 4% of the annual primary productivity in the East China Sea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.68-77
• /
• 2022

The human thermal environment in an apartment complex located in Seoul was quantitatively analyzed to devise methods to modify human heat-related stresses in landscape and urban planning. Microclimatic data (air temperature, relative humidity, wind speed, and short- and long-wave radiation) were collected at 6 locations [Apt-center, roof (cement), roof (grass), ground, playground, and a tree-lined road] in the late spring and summer, and the data were used to estimate the human thermal sensation, physiological equivalent temperature (PET) and universal thermal climate index (UTCI). As a result, the playground location had the highest thermal environment, and the roof (grass) location had the lowest. The mean difference between the two locations was 0.8-1.1℃ in air temperature, 1.8-4.0% in relative humidity, and 7.5-8.0℃ in mean radiant temperature. In open space locations, the wind speed was 0.4-0.5 ms-1 higher than others. Also, a wind tunnel effect happened at the Apt-center location during the afternoon. For the human thermal sensation, PET and UTCI, the mean differences between the playground and roof (grass) locations were: 5.2℃ (Max. 11.7℃) in late spring and 5.4℃ (Max. 18.1℃) in summer in PET; and 3.0℃ (Max. 6.1℃) in late spring and 2.6℃ (Max. 9.8℃) in summer in UTCI. The mean differences indicated a level change in PET and 1/2 level in UTCI, and the maximum differences showed greater changes, 2-3 levels in PET, and 1-1.5 levels in UTCI. Moreover, the roof (grass) location gave 4.6℃ PET reduction and a 2.5℃ UTCI reduction in late spring, and a 4.4℃ PET reduction and a 2.0℃ UTCI reduction in the summer when compared with the roof (cement) location, which results in a 2/3 level change in PET and a 1/3 level in UTCI. Green infrastructure locations [roof (grass), ground, and a tree-lined road] were not statistically significant in the reduction of PET and UTCI in thermal environment modifying effects. The implementation of green infrastructure, such as rooftop gardens, grass pavement, and street tree planting, should be adopted in landscape planning and be employed for human thermal environment modification.

• Korean journal of applied entomology
• /
• v.20 no.3 s.48
• /
• pp.131-134
• /
• 1981

Native soybean collections were evaluated to search a resistant gene source to purple blotch caused by Cercospora kikuchii. Among 467 native lines, about $28.9\%$ of the lines was less than $0.1\%$ and $13.4\%$ was over $2\%$ in natural infection of purple blotch. Natural infection seemed to be significantly associated with weather conditions at the early podding stage. A significant correlation between natural infection and purple discoloration by seed inoculation was observed and this method seemed to be effective as a preliminary screening technique for resistance to purple blotch. Most of the late maturing native soybeans showed susceptible reaction by the seed inoculation contrary to low infection under natural conditions, indicating that the low natural infection might be due to disease escaping by the late maturing instead of their genetic resistance.

• Nuclear Engineering and Technology
• /
• v.15 no.4
• /
• pp.236-247
• /
• 1983

Analyzed are the the DNBR(Departure from Nucleate Boiling Ratio) sensitivities to variations in various PWR operating parameters utilizing the Korea Nuclear Unit 1(KNU-1) design and operating data. Studied parameters in the analysis are core power level, system pressure, core inlet flow rate, core inlet temperature, enthalpy rise hot channel factor, and axial power peaking factor and axial offset. The calculations are performed using the steady state and transient thermal-hydraulics computer program, COBRA-IV-K, which is the revised version of COBRA-IV-i that has been adapted, partially modified and verified at KAERI. A reference case is established based on the design and operating condition of the KNU-1 reactor core, and this provides a basis for the subsequent sensitivity analysis. From the calculation results it is concluded that the most sensitive parameter in the DNBR thermal design is the coolant core inlet temperature while the axial power peaking factor is the least sensitive.

• Journal of ILASS-Korea
• /
• v.25 no.4
• /
• pp.178-187
• /
• 2020

The current emission regulations, US Tier-4 and EU Stage-V, are only able to satisfy the regulations when all currently mass-produced emission reduction technologies such as EGR, DOC, DPF, and SCR are applied. Therefore, in this study, for the application of the Urea-SCR system to non-road diesel engines, the database was established by measuring the NO, NO2 concentration and calculating the NO2/NOx ratio based on the catalyst temperature and exhaust mass flow rate. Also, based on the measured NO2/NOx ratio data, a mathematical model was proposed to predict the NO2/NOx ratio at SCR catalyst, and the suitability of the model was verified through steady-state and transient mode. As a result of comparing the NO2/NOx ratio measured at the DOC outlet under the steady-state condition to two model values separately, the R2 was 0.9811 for the 3D map model and 0.9303 for the mathematical model. And in the case of the NO2/NOx ratio measured at the DPF outlet, the R2 was 0.9797 for the 3D map model and 0.935 for the mathematical model. It was confirmed that the R2 with the model value of the 3D Map of the mathematical model in the transient mode is 0.957, which shows high reliability.

• Journal of Energy Engineering
• /
• v.13 no.4
• /
• pp.242-258
• /
• 2004

The duplex burnable poison absorbers concept was suggested by Korea Atomic Energy Research Institute. This BP rod is composed of inner region of natural U-Gd$_2$O$_3$ and outer shell of enriched UO$_2$-Er$_2$O$_3$. It is expected that this burnable absorber has same reactivity control capability with gadolinia burnable absorber used in extened fuel cycle. In order to evaluate the nuclear feasibility of duplex BPs, the nuclear design characteristics were compared with that of four types of burnable absorbers; gadolinia, erbia, IFBA, dysprosia duplex BP on 24 months fuel cycle for Korean Standard Nuclear Power plants. According to the evaluation results of nuclear characteristics, the duplex BPs were better than other BPs on k-infinitives, reactivity holddown worth (RHW), pin power peaking and moderator temperature coefficient (MTC). The possibility of nuclear core design was also confirmed based on the optimized fuel assemblies which were searched for a sensitivity analysis. Characteristics of core design with duplex BPs was compared with that of reference core with gadolinia BPs for cycle length, power peaking and MTC. The duplex BP core had a little longer cycle length by 4 to 7 days because of increased amount of fissile in enriched uranium at the outer shell of duplex BP In case of power peaking F$\_$Q/ of duplex BP core was reduced from 1.5773 to 1.5335. MTC was also less -0.48 pcm/C than that of reference core. Finally, evaluation of fuel cycle economy was performed for the manufacturing feasibility test and fuel cost evaluation with duplex BPs. Fuel cycle economy of duplex BP core almost was equivalent with that of gadolinia BP core.