• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.44-44
• /
• 2010

포항가속기연구소에서는 성능향상사업(PLS-II)를 수행하고 있다. 전자빔의 에너지는 2.5에서 3 GeV로, 빔전류는 200 mA에서 400 mA로 증가되는 반면 빔에미턴스는 약 1/3로 줄어든다. 저장링 진공시스템은 저장된 전자가 충분한 시간동안 저장되도록 $10^{-9}$ Torr 대의 진공도를 가져야 한다. 빔에너지와 전류가 늘어나기 때문에 기체부하도 약 4배 상승하므로 적절한 배기 시스템을 가지도록 설계되어야 한다. 본 논문에서는 저장링 Main pump로 사용할 조합펌프, Lumped NEG 펌프의 설계 과정과 시험결과 에 대하여 보고하고자 한다.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.7-13
• /
• 2011

The present study has been performed to compare the physiological analysis of monocot model plant (rice) in response to ionizing irradiations (cosmic-ray, gamma-ray, and Ion beam). Ionizing radiations were implanted into monocot model plant (rice) seed. After irradiation, the seeds were planted in the plastic pots for a growth period of one month. Thereafter, the morphological and physiological characteristics including malondealdehyde (MDA) and chlorophyll content, activities of antioxidant enzymes in irradiation samples were investigated. We are confirmed that the activity level of MDA and chlorophyll content were not changed by ionizing irradiation samples. However, the free radical contents were increased in all irradiated plants. And the activities of SOD, POD, and APX were significantly increased by irradiation compared with non-irradiation plant.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.291-298
• /
• 2018

Supplier selection for energy production facility is a multi-criteria decision-making problem and is of strategic importance for cost efficiency of synthetic fiber production company. The purpose of this paper is to present an approach to select best energy production facility for a synthetic fiber production company. Toward this, we derived criteria to evaluate the energy production facility and develop an Analytic Network Process model to help decision makers set priorities on multiple criteria while considering both qualitative and quantitative aspects of the problem. The application of the proposed approach indicates that it can be successfully applied to facilitate the decision making process for selecting the best supplier of the energy production facility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.477-477
• /
• 2016

하천 내 식생에 의한 유속차이는 활발한 에너지 교환에 기인하며 하천 내 흐름 변화에 큰 변화를 가져온다. 또한 식생에 의한 하천 침식과 퇴적의 반복은 하천 지형 변화의 대표적인 원인 중 하나이다. 따라서 본 연구에서는 소하천을 대상으로 관목류(버드나무류)를 식재하여 식생유무 및 밀도 차이에 대한 흐름패턴 및 유속 변화를 분석하였다. 식생은 고밀도(식생 수 : $38/m^2$)와 저밀도(식생 수 : $10/m^2$)로 구분하였으며 유속 측정은 ADCP와 micro-ADV를 이용하여 비교하였다. 실험 유량은 식생 침수 정도에 따라 부분침수($0.5m^3/s$), 완전침수($3.7m^3/s$)로 나누어 실험을 수행하였다. 실험결과 ADCP와 ADV에 의한 유속값은 유사하게 나타났으며 고밀도일수록 식생에 의한 항력으로 인해 느린 흐름을 보였다. 또한 부분침수 시 식생 내 수심 증가로 인한 흐름 변화가 발생하였으며 완전침수 시에도 식생 유무 및 밀도에 따라 흐름 패턴이 바뀌는 것으로 나타났다. 향후 이 연구는 하천 침식 등을 고려한 수목식재 계획 수립에 기초자료로 사용될 수 있으며 다양한 식생을 대상으로 조도계수 변화, 흐름특성 분석 등이 추가적으로 연구되어야 할 것으로 판단된다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1349-1358
• /
• 2018

In addition to responding to the environmental pollution caused by fossil fuels, the enforcement of Renewable Fuel Standard(RFS) system has increased the utilization of renewable energy such as refined fuels oil. The by-product fuel oil(No. 2) and the refined fuel oil(reduced-pressure) are strictly regulated by the domestic legislation and the chemical property changes of the refined fuel oil(reduced-pressure) mixed with the by-product fuel oil(No. 2) were analyzed. As a result of analyzing the physical properties of refined fuel oil(reduced pressure) obtained by mixing 1 : 1 of by-product fuel oil(No. 2), it satisfied the quality standards stipulated by the domestic Enforcement Decree of the Wastes Control Act. However, the results of the additional tests related to the fuel showed a high aromatic content. The high content of aromatic in a fuel is likely to cause the soot and ehaust emission gas during the combustion of the used equipment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.442-448
• /
• 2021

In this work, the (K_1-xAg_x)(Ta_0.8Nb_0.2)O₃ (x=0.1-0.4) ceramics were fabricated using mixed-oxide method, and their structural and electrical properties were measured. All specimens represented a pseudo cubic structure with the lattice constant of 0.3989 nm. When 0.4 mol of Ag was added, second phases induced from metallic Ag and K₂(Ta,Nb)₆O₁₆ phase were observed. Dielectric constant and dielectric loss of K(Ta_0.8Nb_0.2)O₃ specimen doped with 0.3 mol of Ag were 2,737 and 0.446, respectively. The curie temperature was about -5℃, which does not change with Ag addition. The remanent polarization began to decrease sharply around 12~15℃, and the temperature at which the remanent polarization began to decrease as the applied voltage increased shifted to the high temperature side. The electrocaloric effect (ΔT) and electrocaloric efficiency (ΔT/ΔE) of the (K_0.7Ag_0.3)(Ta_0.8Nb_0.2)O₃ ceramics were 0.01024℃ and 0.01825 KmV^-1, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.249-254
• /
• 2023

La_0.7-xCe_xSr_0.3MnO₃ specimens were fabricated by a solid state reaction method and structural and electrical properties with variation of Ce⁴⁺ contents were measured. All specimens exhibited a polycrystalline rhombohedral crystal structure, and the (110) peaks were shifted to low angle side with increasing the amount of Ce⁴⁺ contents. As Ce⁴⁺ ions with different ion radii and charges are substituted with La³⁺ ions, electrical properties are thought to be affected by changes in the double exchange interaction between Mn³⁺-Mn⁴⁺ ions due to distortion of the unit lattice, a decrease in oxygen vacancy concentration, and an increase in lattice defects. Resistivity gradually decrease as the amount of Ce⁴⁺ added increased, and negative temperature coefficient of resistance (NTCR) properties were shown in all specimens. In the La_0.5Ce_0.2Sr_0.3MnO₃ specimens, electrical resistivity, TCR and B-value were 31.8 Ω-cm, 0.55%/℃ and 605 K, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.275-279
• /
• 2023

La_0.7Sr_0.3-xMg_xMnO₃ (LSMMO) (x=0.05~0.20) specimens are fabricated by a solid phase sintering method, and the sintering temperature and time are 1,300℃ and 2 hours, respectively. The dependence of the crystalline structure according to the amount of Mg²⁺ contents is not observed, and all specimens show a polycrystalline rhombohedral crystal structure, the X-ray diffraction (110) peaks move to the high angle side with increasing the amount of Mg²⁺ contents. LSMMO specimens exhibit a granule-shaped microstructure with an average grain size of 1 ㎛ or less. Resistivity gradually decrease as the amount of Mg²⁺ contents increased. And in the La_0.7Sr_0.1Mg_0.2MnO₃ specimen, resistivity and B_25/65-value are 36.7 Ω-cm and 394 K at room temperature, respectively. LSMMO specimens show a variable-range hopping (VRH) electrical conduction mechanism, and the negative temperature of coefficient of resistance (NTCR) is approximately 0.37~0.38%/℃.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.

• Solar Energy
• /
• v.18 no.3
• /
• pp.41-50
• /
• 1998

The purpose of this study is to analyze the energy consumption status for various building types in Taejon. 35 sample buildings were classified into 8 building types, i.e., sports center & swimming pools, hotels, telecommunication exchange service facility, hospitals, research laboratories, department stores, exhibition galleries, universities. According to analyses, energy consumption patterns varies significantly for each building type. Sports centers consumes highest rate(689 $Mcal/sqm{\cdot}yr$) and universities lowest rate(86 $Mcal/sqm{\cdot}yr$) among selected building types.