• The Science & Technology
• /
• v.21 no.1 s.224
• /
• pp.24-25
• /
• 1988

• Nuclear industry
• /
• v.27 no.1 s.287
• /
• pp.31-32
• /
• 2007

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.499-503
• /
• 2022

La_0.7Sr_0.3MnO₃ precursor solution were prepared by a sol-gel method. La_0.7Sr_0.3MnO₃ thin films were fabricated by a spin-coating method on a Pt/Ti/SiO₂/Si substrate. Structural and electrical properties with the variation of sintering temperature were measured. All specimens exhibited a polycrystalline orthorhombic crystal structure, and the average thickness of the specimens coated 6 times decreased from about 427 nm to 383 nm as the sintering temperature increased from 740℃ to 830℃. Electrical resistance decreased as the sintering temperature increased. In the La_0.7Sr_0.3MnO₃ thin films sintered at 830℃, electrical resistivity, TCR, B-value, and activation energy were 0.0374 mΩ·cm, 0.316%/℃, 296 K and 0.023 eV, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.50-50
• /
• 2022

한국농어촌공사 산하의 농업용저수지 중 3786개소에 대한 수질조사를 '19년도에 실시한 결과, TOC 기준 4등급 초과 저수지 비율은 약 20%로써, 도심 근교 저수지에서 녹조현상 빈발로 인해 수질, 악취, 미관 등의 환경문제 개선 민원이 다수 발생하고 있다. 현재 녹조 발생 사후관리를 위해 주로 사용되고 있는 대형 조류제거선은 저수심 수변부에서의 적용성에 한계가 있고, Al 기반의 응집제를 사용하여 조류를 수거해서 폐기하고 있는 실정이다. (주)이엔이티는 농어촌연구원, (주)코레드, (주)삼호인넷과 함께 호소나 정체하천의 수변지역에 적용될 수 있는 저에너지형 유해조류 포집시스템 개발과, 수거된 조류부산물을 무독화하여 농업재료로 재활용하는 방안을 연구하고 있다. 저수지나 정체수역의 녹조는 바람, 수면유동 등에 의해 수변에 집적되는 특성이 있어, 인공지능 기술로 녹조현상을 감시하여 조류 밀집구간에 접근할 수 있는 자율이동식 수상이동장치를 개발 중이다. 수상이동장치는 조류포집장치를 탑재하기 위한 부력체, 원격 운전이 가능한 무인항법장치, 수변식생대 및 저수심지역 이동을 고려한 수차방식 추진체, 전체 장치의 전원 공급을 위한 고성능 배터리 등으로 구성하여 상세 도면 설계를 진행하고 있다. 조류포집장치에는 표층에 주로 분포하는 남조류를 선택 흡입하는 포집 부표를 적용하였고, Al계 응집제 사용을 배제한 분리막 실험을 통해 침지형 막분리조 및 가압형 농축조를 설계하였다. 유해조류 포집 및 농축은 수상에서 이동체에 탑재하여 이뤄지고, 육상에서는 자원 회수가 가능하도록 회분식 응집공정으로 구분하였다. 조류 밀집지역에서 수거된 조류의 무독화 및 농업재료 자원화 타당성 평가를 위해 특용 버섯균주를 활용한 시료별 분석항목을 선정하고 실험 매트릭스에 따라 실증실험을 수행하였다. 수거조류를 전처리하여 성분 및 발열량을 분석하고 버섯재배 전후의 마이크로시스틴 독소(LR, RR, LR)를 포함한 성분 분석을 수행하여, 고체연료, 비료 및 사료로 활용방안을 검토하였다. 무인자율이동 조류포집장치는 실증화 규모로 제작하여 기선정된 테스트베드에서 현장적용성 평가를 수행할 예정이다. 본 연구를 통해 개발된 유해조류 포집 시스템은 기존의 녹조제거 방안을 보완하여 정체수역의 생태계 복원 및 친수공간의 환경개선 등에 적용되며, 무독화가 입증된 유해조류의 농업재료 자원화 기술은 고부가 상품 개발 및 환경폐기물 감축에 활용될 것이다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.297-303
• /
• 2024

In this study, KTN heterolayer thin films were fabricated by alternately stacking films of K(Ta_0.70Nb_0.30)O₃ and K(Ta_0.55Nb_0.45)O₃ synthesized using the sol-gel method. The sintering temperature and time were 750℃ and 1 hour, respectively. All specimens exhibited a polycrystalline pseudo-cubic crystal structure, with a lattice constant of approximately 0.398 nm. The average grain size was around 130~150 nm, indicating relatively uniform sizes regardless of the number of coatings. The average thickness of a single-coated film was approximately 70 nm. The phase transition temperature of the KTN heterolayer films was found to be approximately 8~12℃. Moreover, the 6-coated KTN heterolayer film displayed an excellent dielectric constant of about 11,000. As the number of coatings increased, and consequently the film thickness, the remanent polarization increased, while the coercive field decreased. The 6-coated KTN heterolayer film exhibited a remanent polarization and coercive field of 11.4 μC/cm² and 69.3 kV/cm at room temperature, respectively. ΔT showed the highest value at a temperature slightly above the Curie temperature, and for the 6-coated KTN heterolayer film, the ΔT and ΔT/ΔE were approximately 1.93 K and 0.128×10^-6 K·m/V around 40℃, respectively.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.10-19
• /
• 2024

The bipolar membrane is an ion exchange membrane consisting of a cation exchange layer, an anion exchange layer, and an interface layer, and is a membrane that generates protons and hydroxide ions based on water dissociation characteristics. Using these properties, research is being conducted in various application fields such as the chemical industry, food processing, environmental protection, and energy conversion and storage. This paper investigated the concept of bipolar membrane, water dissociation mechanism, and water dissociation catalyst to provide a comprehensive understanding of bipolar membrane technology, were investigated. Lastly, we also investigated the bipolar membrane process that has been recently applied to energy technology.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.387-393
• /
• 2019

In this study, the free motion of a riser due to vortex shedding was numerically simulated with Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) turbulence models. A numerical simulation program was developed by applying the Rhie-Chow interpolation method to the pressure correction of the OpenFOAM standard solver pimpleDyMFoam. To verify the developed program, the vortex shedding around the fixed riser at Re = 3900 was calculated, and the results were compared with the existing experimental and numerical data. Moreover, the vortex-induced vibration of a riser supported by a linear spring was numerically simulated while varying the spring constant. The results are compared with published direct numerical simulation (DNS) results. The present calculation results show that the numerical method is appropriate for simulating the vortex-induced motion of a riser, including lock-in phenomena.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.827-839
• /
• 2021

Due to climate change and population growth, water scarcity is getting worse all over the world. Among various methods for desalination of seawater, the Multi-Effect Adsorptive Desalination method, which combines the existing Multi-Effect Desalination method and the Adsorptive Desalination method and can produce high-concentration-high-concentration freshwater, is emerging. Because the Multi-Effect Adsorptive Desalination method combines the two different methods, the system becomes complicated and the possibility of failure increases. Therefore, in this study, availability analysis was performed on the Multi-Effect Adsorptive Desalination process. A total of four types of reliability block diagrams were presented, and availability analysis was conducted based on them. The first form of a reliability block diagram is configured in series without any redundancy. The availability of the reliability block diagram composed of the serial system was found to be lower than the required availability. In order to increase availability, the redundancy to pumps and boiler are added to system. As a result of availability analysis, it was confirmed that designing desalination systems with redundancy to pump meets the 93% availability, which is typically required availability for various plants.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.4
• /
• pp.430-436
• /
• 2022

This paper presents the numerical model development of a microchannel heat exchanger in mobile air-conditioning and heat pump applications. The model has been developed based on the effectiveness-NTU method using a segment-by-segment modeling approach. State-of-art correlations are used for refrigerant- and air-side heat transfer coefficients and pressure drops. The calculated heat condenser capacities are in good agreement with experimental data, with an average difference of 1.86%. The current model can be used for microchannel condenser simulations under various operating conditions. It is anticipated to improve productivity in designing and optimizing microchannel heat exchangers with folded louver fin geometry.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.1-13
• /
• 2024

Hydrogen is emerging as an essential material for carbon neutrality. In particular, Korea needs 22.9 million tons of imported clean hydrogen by 2050 to achieve carbon neutrality. However, a large amount of carbon is emitted during the import process, and market regulations are being discussed. This research estimates the carbon emissions of importing green hydrogen from Vietnam, Australia, and the United Arab Emirates to Korea, and calculates imported green hydrogen prices under carbon emission market regulations.