• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.169-177
• /
• 2010

Recently due to the typhoon and extreme rainfall induced by abnormal weather and climate change, the probability of severe damage to human life and property is rapidly increasing. Thus it is necessary to create adequate and reliable flood risk map in preparation for those natural disasters. The study area is Seo-gu in Daegu which is located near Geumho river, one of the tributaries of Nakdong river. Inundation depth and velocity at each time were calculated by applying FLUMEN model to the target area of interest, Seo-gu in Daegu. And the research of creating flood risk map was conducted according to the Downstream Hazard Classification Guidelines of USBR. The 2-dimensional inundation analysis for channels and protected lowland with FLUMEN model was carried out with the basic assumption that there's no levee failure against 100 year precipatation and inflow comes only through the overflowing to the protected lowland. The occurrence of overflowing was identified at the levee of Bisan-dong located in Geumho watershed. The level of risk was displayed for house/building residents, drivers and pedestrians using information about depth and velocity of each node computed from the inundation analysis. Once inundation depth map and flood risk map for each region is created with this research method, emergency action guidelines for residents can be systemized and it would be very useful in establishing specified emergency evacuation plans in case of levee failure and overflowing resulting from a flood.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.207-215
• /
• 2009

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% is prepared by air dry, wrapped, moisture, and underwater conditions. A series of unconfined compression tests are carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen is higher than those of moisture and wrapped cured specimens when cement ratio is less than 10%, whereas it is lower when cement ratio is greater than 10%. Regardless of cement ratio, air dry cured specimens are stronger than underwater cured specimens. A strength increase ratio with cement ratio is calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen is lowest and that of wrapped, moisture, and underwater cured ones increased by square. Strength of air dry cured specimen drops to maximum 30% after wetting when cement ratio is low. However, regardless of cement ratio, strength of moisture and wrapped specimens drops to an average 10% after wetting. The results of this study can predict the strength variation of cemented sand depending on water supply conditions and wetting in the field, which can guarantee the safety of geotechnical structures such as dam.

• Journal of Environmental Policy
• /
• v.7 no.4
• /
• pp.35-55
• /
• 2008

Assessing vulnerability to climate change is the first step to take when setting up appropriate adaptation strategies. Adaptive capacity to climate change is the important factor comprising vulnerability. An adaptive capacity index in agricultural water management system was developed considering agricultural water supply and demand for rice production in Jeolla-do, Korea. The agricultural water supply was assumed to be equal to the amount of water stored in the major agricultural reservoirs, while data on the agricultural water demand was obtained from the dynamic simulation results by Korea Agriculture Corporation(KAC). The spatial unit for analysis was conducted at the county(Si, Gun, Gu) level and temporal scale was based on every month from 1991-2003. Adaptive capacity for drought stress index(ACDS index) was calculated as the percentage of data points where the irrigated water supply was greater than the crop water demand. The ACDS index was compared with SWSCI(Standard Water Storage Capacity Index) and the relationship showed high degree of fit($R^2$=0.84) using the exponential function, indicating that the developed ACDS index is useful for evaluating the status of the balance between agricultural water supply and demand, especially for the small sized agricultural reservoirs. This study provided the methodological basis for developing climate change vulnerability index in agricultural water system which is projected to be more frequently exposed to drought condition in the future due to climate change. Further research should be extended to the study on the water demand of the crops other than rice and to the projection of the change in ACDS index in the future.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.1-10
• /
• 2022

Irrigation water supplied to the paddy field is consumed in the amount of evapotranspiration, underground infiltration, and natural and artificial drainage from the paddy field. Irrigation return flow is defined as the excess of irrigation water that is not consumed by evapotranspiration and crop, and which returns to an aquifer by infiltration or drainage. The research on estimating the return flow play an important part in water circulation management of agricultural watershed. However, the return flow rate calculations are needs because the result of calculating return flow is different depending on irrigation channel water loss, analysis methods, and local characteristics. In this study, the irrigation return flow rate of agricultural watershed was estimated using the monitoring and SWMM (Storm Water Management Model) modeling from 2017 to 2020 for the Heungeop reservoir located in Wonju, Gangwon-do. SWMM modeling was performed by weather data and observation data, water of supply and drainage were estimated as the result of SWMM model analysis. The applicability of the SWMM model was verified using RMSE and R-square values. The result of analysis from 2017 to 2020, the average annual quick return flow rate was 53.1%. Based on these results, the analysis of water circulation characteristics can perform, it can be provided as basic data for integrated water management.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.875-889
• /
• 2021

This study compares and analyzes the Soil and Water Assessment Tool (SWAT) and Terra MODIS (Moderate Resolution Imaging Spectroradiometer) as coniferous, deciduous and mixed forest with Yongdam Dam upstream (904.4 km²). The hydrologic evaluation period was set to 10 years from 2010 to 2019, and the applicability of the 8-day MOD15A2 Leaf Area Index (LAI) data, 3 TDR (Time Domain Reflectometry) (GB, JC, CC), and 1 Flux Tower (DU) evaporation volume (YDD) data was simulated. As a result, the R² of coniferous forest, deciduous forest and mixed forest are 0.95, 0.89, 0.90, soil moisture and evaportranspiration stations R² were analyzed at 0.50 to 0.55 and 0.51, respectively, with R² at 0.74, RMSE 2.75 mm/day, NSE 0.70 and PBIAS 14.3% for Yongdam inflow. Based on the calibrated and validated watersheds, the annual average evaportranspiration was calculated as coniferous 469.7 mm, deciduous 501. mm and 511.5 mm mixed forest, total runoff were estimated at coniferous 909.8 mm, deciduous 860.6 mm and 864.2 mm mixed forest. In the case of annual average evaportranspiration, it was evaluated that deciduous were high, but in the case of streamflow, it was evaluated that coniferous were high. Unlike other hydrologic with similar patterns throughout the year, the average annual evapotranspiration was about 7% higher than coniferous due to the higher evapotranspiration of deciduous with high leaf area index in summer and fall. In addition, deciduous were 9% and 6% higher for surface runoff and lateral flow, but the groundwater of coniferous was 77% higher. Therefore, it was confirmed that the total runoff was in order of coniferous, mixed forest, and deciduous.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.67-67
• /
• 2023

수문관측의 핵심은 강우-유출 관계다. 하천유량 생산을 위해 수많은 지점에서 유량측정을 수행한다. 그러나 유량자료의 신뢰도는 높지 않다. 그리고 댐 유입량 산정에 아무 도움이 되지 않고 있다. 더구나 저수지의 경우는 유입량 자료도 없이 운영되고 있다. 저수지, 댐에 물이 고여 있는데 이를 활용하면 유입량을 계산할 수 있고, 그 지점에서 유량이 얼마인지 고품질로 생산할 수 있다. 여기서는 총저수량 260만m³, 유역면적 3.7km²인 감포댐에 적용하여 저수량 자료를 활용하여 유입량의 신뢰도를 얼마나 개선시킬 수 있는지 분석한 결과는 다음과 같다. 여기서 적용 기간은2020.9.1.~9.14., 2022.9.5.~9.6 등 2개 사상이고, ONE 모형에 의해 10분 단위로 유출량을 모의했다. 모의 방법은 총유량을 같게 하는 방법과 저수위 오차를 최소로 하는 방법 등 두 가지로 했다. 첫째, 2020.9.1.~9.14. 사상은 강우량은 10분 최대 19.0mm, 총 127.0mm였다. 총유량을 같게 하는 경우 유입량은 10분 최대 5.4m³/s, 총 40만m³로 모의돼, 유출률 85.5%로 나타났고, 관측은 10분최대 4.7m³/s, 총 40만m³, 유출률 85.3%로 나타났다. 유량 신뢰도는 RMSE 0.491mm, NSE 0.237, R²는 0.455로 나타났다. 이 경우 저수위 모의 신뢰도는 RMSE 0.600m, NSE 0.158, R²는 0.893로나타났다. 저수량 오차를 최소로 한 경우 유입량은 10분 최대 4.0m³/s, 총 28만m³로 모의돼, 유출률 59.4%로 나타났고, 관측은 10분 최대 4.0m³/s, 총 28만m³, 유출률 85.3%로 나타났다. 유량 신뢰도는 RMSE 0.425mm, NSE 0.430, R²는 0.507로 나타났다. 이 경우 저수위 모의 신뢰도는 RMSE 0.110m, NSE 0.972, R²는 0.995로 높았다. 둘째, 2022.9.5.~9.6. 사상은 강우량은 10분 최대 32.3mm, 총 196.0mm였다. 총유량을 같게 하는 경우 유입량은 10분 최대 64.5m³/s, 총 59만m³로 모의돼, 유출률 81.6%로 나타났고, 관측은 10분 최대 80.1m³/s, 총 59만m³, 유출률 81.6%로 나타났다. 유량 신뢰도는 RMSE 1.832mm, NSE 0.960, R²는 0.984로 나타났다. 이 경우 저수위 모의 신뢰도는 RMSE 0.323m, NSE 0.968, R²는 0.999로나타났다. 저수량 오차를 최소로 한 경우 유입량은 10분 최대 80.1m³/s, 총 66만m³로 모의돼, 유출률 91.6%로 나타났고, 관측은 10분 최대 80.1m³/s, 총 59만m³, 유출률 81.8%로 나타났다. 유량 신뢰도는 RMSE 2.120mm, NSE 0.947, R2는 0.949로 나타났다. 이 경우 저수위 모의 신뢰도는 RMSE 0.153m, NSE 0.993, R²는 0.997로 높았다. 종합하면 저수량 오차가 최소가 되도록 하천 유출량을 모의하면 결과적으로 하천유량의 신뢰도를 향상시키는 것이라 말할 수 있다.

• Journal of Wetlands Research
• /
• v.10 no.2
• /
• pp.115-128
• /
• 2008

Various human activities such as the Urbanization and Industrialization are estimated the main factors to pollute the stream. Now days, numerous studies are carried out for managing non-point sources which have un-effect on water quality of streams by land-use and livestock. In case of Korea, a matter of concern that the management of Pal dang reservoir - the main water resources of the national capital region - has been occurring. Especially, large-scale constructed-wetlands are planned and constructed at the end of Kyoung-an stream. Additionally a lot of sewage treatment plants are newly installed and extended in this watershed. According to these efforts, water quality of Kyoung-an stream is predicted that would be improved. But the more detail and scientific analysis should be carried out for the water quality improvement, because, existing water quality improvement projects are not involved to analyze root of water quality deterioration and improvement plans. Therefore, this study aims to select suitable areas for constructed-wetlands and to calculate size of the constructed-wetlands for water quality improvement in Kyoung-an stream through the geographical pollutant distribution analysis and land-use pattern analysis by high resolution satellite image and suitable area analysis of constructed-wetlands by GIS(Geographic information system). The progress of this study is (1) to select maximum pollutant loaded area by geographical analysis based on water quality data, (2) to analyze land-use patterns using high resolution satellite image, (3) to select suitable areas of constructed-wetlands, (4) to calculate area and volume of chosen constructed-wetlands using GIS. Basically, sizes of constructed-wetlands are induced through the constructed-wetlands design index based on treatment ratio(provided by Korea Water Resources Corporation). As a result of this study, two areas are selected to construct constructed-wetlands. One of the area was $127,586m^2$ near by Yong-in sewage treatment plant, and the other area was $1,647m^2$ near by Ju-buk stream and Dae-dae stream.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1065-1075
• /
• 2015

In the estuary where the structure such as river-mouth weir has been installed, the flow is developed very complicatedly due to river water from upstream, tide of the sea and floodgate operation. Especially, if basin outlets more than one exists in one estuary, the boundary conditions will be significantly more complex form. Saemangeum(SMG) project area in Korea is the most typical example. There are Mankyung river and Dongjin river in upstream. The water of them inflows into SMG project area. In the downstream, river flow was drained from inland to sea over the SMG sea dike through the sluice. The connecting channel was located between Mankyung and Dongjin basins. It functions not only as transportation by ship in ordinary period but also as flood sharing by sending flood flow to each other in flood period. Therefore, in order to secure the safety against flood, it is very important to understand the flood sharing capacity for connecting channel. In this study, the flood control effect was analyzed using numerical simulation. Delft3D was used to numerical simulation and simulated period was set up with neap tide, in which the maximum flood stage occurred due to poor drainage. Actually, three connecting channels were designed in land use plan of the SMG Master Plan, but they were simplified to a single channel for conciseness of analysis in this study. According to the results of numerical analysis, the water level difference between two basins was increased and the maximum flood stage at dike sluice was also upraised depending on decrease of conveyance. And the velocity induced by same water level difference was decreased when the conveyance became smaller. In certain conveyance above, there was almost no flood control effect. Therefore, if the results of this study are considered for design of connecting channel, it will be expected to draw the optimal conveyance for minimizing dredging construction cost while maximizing the flood control effect.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.887-898
• /
• 2007

A physically based semi-distributed model, SWAT was applied to the Chungju Dam upstream watershed in order to investigate the spatial and temporal characteristics of watershed sediment yields. For this, general features of the SWAT and sediment simulation algorithm within the model were described briefly, and watershed sediment modeling system was constructed after calibration and validation of parameters related to the runoff and sediment. With this modeling system, temporal and spatial variation of soil loss and sediment yields according to watershed scales, land uses, and reaches was analyzed. Sediment yield rates with drainage areas resulted in $0.5{\sim}0.6ton/ha/yr$ excluding some upstream sub-watersheds and showed around 0.51 ton/ha/yr above the areas of $1,000km^2$. Annual average soil loss according to land use represented the higher values in upland areas, but relatively lower in paddy and forest areas which were similar to the previous results from other researchers. Among the upstream reaches, Pyeongchanggang and Jucheongang showed higher sediment yields which was thought to be caused by larger area and higher fraction of upland than other upstream sub-areas. Monthly sediment yields at the main outlet showed same trend with seasonal rainfall distribution, that is, approximately 62% of annual yield was generated during July to August and the amount was about 208 ton/yr. From the results, we could obtain the uniform value of sediment yield rate and could roughly evaluate the effect of soil loss with land uses, and also could analyze the temporal and spatial characteristics of sediment yields from each reach and monthly variation for the Chungju Dam upstream watershed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.72-78
• /
• 2009

The demand for rainfall data in gridded digital formats has increased in recent years due to the close linkage between hydrological models and decision support systems using the geographic information system. One of the most widely used tools for digital rainfall mapping is the PRISM (parameter-elevation regressions on independent slopes model) which uses point data (rain gauge stations), a digital elevation model (DEM), and other spatial datasets to generate repeatable estimates of monthly and annual precipitation. In the PRISM, rain gauge stations are assigned with weights that account for other climatically important factors besides elevation, and aspects and the topographic exposure are simulated by dividing the terrain into topographic facets. The size of facet or grid cell resolution is determined by the density of rain gauge stations and a $5{\times}5km$ grid cell is considered as the lowest limit under the situation in Korea. The PRISM algorithms using a 270m DEM for South Korea were implemented in a script language environment (Python) and relevant weights for each 270m grid cell were derived from the monthly data from 432 official rain gauge stations. Weighted monthly precipitation data from at least 5 nearby stations for each grid cell were regressed to the elevation and the selected linear regression equations with the 270m DEM were used to generate a digital precipitation map of South Korea at 270m resolution. Among 1.25 million grid cells, precipitation estimates at 166 cells, where the measurements were made by the Korea Water Corporation rain gauge network, were extracted and the monthly estimation errors were evaluated. An average of 10% reduction in the root mean square error (RMSE) was found for any months with more than 100mm monthly precipitation compared to the RMSE associated with the original 5km PRISM estimates. This modified PRISM may be used for rainfall mapping in rainy season (May to September) at much higher spatial resolution than the original PRISM without losing the data accuracy.