• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.50.1-50.1
• /
• 2010

내열성과 내부식성, 촉매능력등이 뛰어난 백금은 자동차 배출가스 정화촉매, 유/무기화학반응의 공정 촉매, 석유화학산업에서의 촉매 등 촉매 뿐만 아니라 용융유리용 도가니, 유리 섬유용 부싱 등의 유리산업, 백금 열전대 외에도 전기/전자기기, 치과용 합금, 장신구, 항공우주,등의 많은 분야에서 폭넓게 쓰인다. 한편 낮은 기계적 특성을 개선하기 위하여 로듐 등의 백금족 원소를 첨가한 합금을 제조하여 이용하고 있지만 로듐의 공금 부족과 이에 따른 가격 상승으로 인한 대체조성의 설계가 요구되고 있다. 또한 고온의 산화분위기에 노출이 되면 산화물이 형성되고 이것이 휘발하여 중량의 손실이 생긴다고 알려져 있다. 본 연구에서는 백금 합금의 이러한 문제점의 해결방안을 제시하고자 백금족 원소를 첨가하고 첨가 원소별 산화휘발의 정도를 측정하였다. 시편은 plasma arc melting법으로 각각 Pt, Pt-20%Rh, Pt-11%Ir, Pt-10%Rh-10%Ir의 조성을 가지는 합금을 만든 후 압연을 하여 판상으로 만들었고, 이를 각각 $1000^{\circ}C$, $1200^{\circ}C$, $1400^{\circ}C$ 등에서 각각 96시간 까지 산화휘발시켜 중량손실량을 측정하였고 이를 XPS를 이용한 표면분석을 하여 산화휘발거동을 규명하였다. 그 결과 Pt-20%Rh가 가장 우수한 고온산화휘발특성을 보였으며 상대적으로 고온산화휘발특성이 좋지 않은 Pt-Ir 2원계 합금에 Rh를 첨가한 Pt-10%Rh-10%Ir 3원계 합금을 만들어 약 60% 향상된 결과를 얻을 수 있었고 이 결과를 증기압 관점에서 고찰하였다.

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.267-273
• /
• 2001

In this study, the survival rate of fiber is investigated by nozzle size difference in injection/mold sides. The survival rate of fiber is influenced about the nozzle size differ. Also, The mechanical properties of short carbon glass fiber reinforced polypropylene are experimentally measured as functions of fiber volume fraction and nozzle size difference. These mechanical properties are compared with the survival rate of fiber and fiber volume fraction using image analysis after pyrolytic decomposition. The survival rate of fiber as well as fiber volume fraction is influenced by injection processing condition, the used materials, mold conditions and nozzle sides difference, etc, In particular, the survival rate of fiber is great influenced when injection/mold nozzle sides are different more than that of the same. Consequently, the mechanical properties of short carbon/glass fiber reinforced polypropylene arc improved as the nozzle sides are the same in injection mold sides.

• 한국산업융합학회 논문집
• /
• 제12권2호
• /
• pp.107-112
• /
• 2009

The effective reinforcement methods of structure is required to improve the durability of existing structures. Recently, the continuous fiber sheets to the concrete structures are widely used in the earthquake-proof reinforcement method. This study examines suitability and effect to concrete structure of fiber by FEM analysis. The result of analysis is as follows; All specimens occurred bending tensile failure at the middle span. Ultimate strength of specimen in the RC and reinforced RC specimen were 53.9 kN, 56.3 kN respectively and it was some low by degree 0.89, 0.82 to compare with calculated result. The deflection of specimen at the middle span occurred in approximately 0.2 mm, and did linear behavior in load 20 kN by seat reinforcement. Stiffness did not decrease by occurrence in the finer crack and reinforcement beam's flexure stiffness was increased until reach in failure. To compare calculated value and analysis value, it almost equal behavior in the elastic reign and can confirm effectiveness of analysis. Crack was distributed uniformly by reinforcement of fiber seat at failure and it do not occurred stiffness decreases.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.70-74
• /
• 2005

This study was aimed to isolation and identification of attached bacteria on the clothes excavated from Deajeon area dating on the 16th century. From the observation with colony shape, 17 bacterial strains were isolated, and then 7 bacterial strains were identified with morphological and biochemical characteristics. Streptococcus sp., Alcaligenes faecalis, Gemella sp., Acinetobacter sp., Pseudomonas vesicularis, Aeromonas sain. salmonicida, Moraxella spp. In observation of the bacterial strains by the sort of textile, more bacterial strains were found in silk, cotton, and cotton batt than in ramie and hemp. It is suggest that hemp has antibacterial characteristics due to the presence of lignin. In the comparison washed samples with unwashed ones, there were more kinds of bacterial strains in washed samples. In the cellulase activity tests, all isolated bacteria had low level cellulase activity.

• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.395-398
• /
• 2003

In this study, we measured the antibacterial activities, deodorization, UV cut ability, whiteness and SEM, according to the size($5{\mu}m$, $15{\mu}m$) of $TiO_2$, concentration(3%, 5%, 10%) and dipping temperature($50^{\circ}C$, $70^{\circ}C$) with using anatase type of $TiO_2$ photocatalyst. Photocatalyst is the substance which carries out functions, such as decomposition, removal, deodorization, antibacterial, etc. of a contaminant, in a place with light based on an oxidation-reduction reaction. The results of this study were as follow. Antibacterial activities are increased with increasing of the $TiO_2$'s concentration, and $TiO_2$ has high antibacterial activities for Staphylococcus aureus but it has low antibacterial activities for Klebsiella pneumoniae. The deodorization and UV cut ability is very good, therefore be able to get good effects with using only 3% of $TiO_2$. Every effects are increased by using small size of $TiO_2$ and high dipping temperature.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.122-129
• /
• 2012

To develop a waterproof breathable material, we fabricated three kinds of nanofiber web laminates using a massproduced electrospun nanofiber web with different substrates and layer structures. The waterproofness and breathability of nanofiber web laminates were evaluated after repeated launderings and compared with those of conventional waterproof breathable fabrics currently in use, including densely woven fabric, microporous membrane laminated fabric, and coated fabric. The durability of nanofiber web laminates, including adhesion strength, abrasion resistance, tensile strength, and tearing strength, was also assessed and compared with those of conventional waterproof breathable fabrics. The water vapor transmission of nanofiber web laminates increased slightly after repeated launderings, whereas the air permeability somewhat decreased after launderings but still maintained an acceptable level of air permeability. Laundering reduced the resistance to water penetration of nanofiber web laminates, which implies that laminating techniques or substrate materials that could support waterproofness of the laminated structure should be explored. The adhesion strength, abrasion resistance, tensile strength, and tearing strength of nanofiber web laminates were in a range comparable to conventional waterproof breathable materials.

• 한국의류산업학회지
• /
• 제1권1호
• /
• pp.56-61
• /
• 1999

Swelling and fibrillation of two kinds of lyocell, $Tencel^{(R)}$ and $Lyocell^{(R)}$, were investigated using polarizing and scanning electron microscope (SEM). $Tencel^{(R)}$ of a representative lyocell showed that loop tenacity which is related to wrinkle and resilience of fiber does not show significant reduction in wet state. Two kinds of lyocell exhibited surprising degree of swelling in aqueous NaOH solution under free tension. Diameters of $Tencel^{(R)}$ and $Lyocell^{(R)}$ swelled up to 670% and 830%, respectively in the range of around 10% NaOH concentration. Molecular orientation estimated by birefringence also reduced remarkably in alkaline solution. Moreover, diameter and birefringence which changed in alkaline solution did not recovered to original level even after washing and drying. Fibrillation of $Lyocell^{(R)}$ fiber observed by SEM seems to be easier than that of $Tencel^{(R)}$. In order to understand the difference between $Tencel^{(R)}$ and $LyoceJl^{(R)}$, further study on the structure of the two fibers will be followed.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.295-298
• /
• 2003

The study investigated the effect of multi-functional fabric on the autonomic nervous function and psychological variables of 20 students. The experimental group exhibited lower values in anxiety, depression, fatigue and stress level and higher emotional level. This study reveals that multi-functional fabrics reduced the low frequency/high frequency power ratio of heart rate variability. These results support the multi-functional fabrics increases cardiac parasympathetic tone. In addition, experimental group were found to have lower heart rate compared with controls. This augmented heart rate in experiment provides support for stablizing autonomic nervous system. In conclusion, multi-functional fabrics may stabilize the autonomic nervous system and psychological symptoms.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.523-533
• /
• 2020

Previous studies are used to examine cellulose content, degumming period, fiber quality, production yield, production cost, development limit of fiber according to physical, chemical, and microbial degumming methods. Three types of degumming methods are used to measure surface condition after degumming, necessity of additional degumming and degree of impurity removal. First, previous studies confirmed that the microbial degumming method is superior in terms of cellulose content, fiber quality, production yield, production cost, and fiber development possibility. Second, surface condition and the necessity of additional degumming were analyzed by SEM. The black skin binding material was removed in the case of the Sangnangyi and chemical degumming; however, it was insufficient and further degumming was required. Skin fiber binding material was removed in the case of microbial degumming and the surface was cleanest after degumming; in addition, most showed the form of yarn decomposition. The FT-IR spectrum determined the degree of removal of impurities and showed that it can utilize inherent physical properties as the best degumming method. The degree of removal of pectin and lignin by microbial degumming was cleanest with hemicellulose also reduced by microbial degumming.

• 한국의류산업학회지
• /
• 제23권3호
• /
• pp.380-389
• /
• 2021

This study aimed to reveal the perceptions and trends of digital fashion technology through an informational approach. A big data analysis was conducted after collecting the text shown in a web environment from April 2019 to April 2021. Key words were derived through text mining analysis and network analysis, and the structure of perception of digital fashion technology was identified. Using textoms, we collected 8144 texts after data refinement, conducted a frequency of emergence and central component analysis, and visualized the results with word cloud and N-gram. The frequency of appearance also generated matrices with the top 70 words, and a structural equivalent analysis was performed. The results were presented with network visualizations and dendrograms. Fashion, digital, and technology were the most frequently mentioned topics, and the frequencies of platform, digital transformation, and start-ups were also high. Through clustering, four clusters of marketing were formed using fashion, digital technology, startups, and augmented reality/virtual reality technology. Future research on startups and smart factories with technologies based on stable platforms is needed. The results of this study contribute to increasing the fashion industry's knowledge on digital fashion technology and can be used as a foundational study for the development of research on related topics.