• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 추계학술발표논문집
• /
• pp.195-198
• /
• 2000

IMF이후 건설 물량 감소에 대비하여 재해율은 증가 추세에 있고, 오히려 재해 강도율은 높아져 중대사고가 많이 발생하고 있는 추세이며, 건설업체에서는 안전관리에 대한 비용을 더욱 아끼려고 하고 있고, 비용 절감을 위해 재해예방을 위한 안전시설 비용이나 안전활동 비용을 투자하지 않고 있다. 따라서 본 연구에서는 노동부와 한국산업안전공단 및 재해예방 인력을 활용하여 안전 순찰 점검활동을 지원함으로서 각종 증대재해 위험요소를 사전에 제거함으로써 재해로 인한 손실을 최소화하여 국가 경제발전에 기여하고자 한다.

• 프린팅코리아
• /
• 통권71호
• /
• pp.92-105
• /
• 2008

인쇄기기의 경우 인쇄속도가 시간당 1만장2만장을 넘어섰다. 인쇄속도가 빨라지는 만큼 인쇄용지도 점점 고급화되고 있다. 이처럼 인쇄에 직접적인 영향을 미치는 환경은 점점 고급화되고 있는 반면 인쇄근로자들의 근무환경은 그 속도를 따라가지 못하고 있는 것이 현실이다. 아직까지도 대부분의 업체들이 인쇄작업을 할 때 많은 노동력을 필요로 하고 있다. 기계작동시에는 큰 문제가 없으나 물건이송이나 종이 뒤집기 작업 등에서 고강도의 노동력을 필요로 하기 때문에, 남성 직원만을 뽑을 수 밖에 없다. 하지만 유럽의 경우 여성들이 인쇄사에서 작업을 하는 것을 종종 볼 수 있다. 이 같은 현상은 많은 보조기구들이 있어 여성 혼자 작업을 해도 무리가 없기 때문이다. 우리나라에서도 이러한 작업환경개선을 위해 다양한 노력들이 시도되고 있다. 그중의 하나가 노동부의 고용환경개선지원금과 한국산업안전공단의 클린사업지원, 근골격지원, 유해환경해소 사업 등이 그것이다. 이에 본지에서는 노동부와 한국산업안전공단에서 진행하고 있는 노동환경개선을 위한 사업들에 대해 알아보고, 인쇄사에 보조기기를 납품하고 있는 업체와 실제 보조기기를 사용하고 있는 업체를 만나보았다.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.342-352
• /
• 2021

Objectives: This study analyzed the local exposure levels of radiation emitted from the equipment with soft X-ray ionizers to investigate the radiation exposure levels in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the local radiation levels for the equipment installed in two LCD manufacturing companies. The equipment were installed at diverse processes and equipped with various number of ionizers. The local radiation levels were measured on the surface of the equipment by using direct reading equipment, and the measurements were converted into annual effective dose by considering the radiation exposure time of workers. Statistical analyses were performed to investigate the radiation exposure characteristics. Results: Annual effective doses for 97.6% of the equipment being measured were less than 1 mSv. However, the range of annual effective doses was 0.004 mSv ~ 2.167 mSv, which indicated a large variation among the equipment. Statistical analyses of the study found that this large variation was raised due to improper shielding of the equipment rather than process and/or equipment characteristics. To pinpoint the cause of this large variation in annual effective dose, this study improved the shielding of the equipment being radiated over 1 mSv and found that their average effective dose was reduced from 1.604 mSv to 0.126 mSv after shielding improvement. Conclusions: Relatively high exposure levels of radiation were observed in some equipment where their shielding were insufficiently thick and/or sealed. This finding implies that the shielding of the equipment is an important engineering countermeasure to control the radiation exposure levels in industries.

• 한국산업보건학회지
• /
• 제31권3호
• /
• pp.255-265
• /
• 2021

Objectives: The purpose of this study is to analyze the exposure characteristics of inorganic acids. Methods: We analyzed exposure data (n = 363,146) for six inorganic acids (hydrogen fluoride, hydrogen bromide, hydrogen chloride, phosphoric acid, nitric acid, and sulfuric acid) collected between 2017 and 2019 in South Korea. Measurement characteristics and exposure levels (ELs) were analyzed by inorganic acid, industry category, enterprise size, and measurement year. Results: Measurement percentage dominated in time-weighted average (TWA, 91%) compared to short term exposure limit (STEL) and Ceiling. Most of the measurements (79.7%) were collected from the manufacturing category of industry. Medians of ELs were mostly low (≤3% of the threshold limit), with the exception of sulfuric acid (4.6% of TWA and 10.5% of STEL). The percentages of exceeding 1% of the occupational exposure limits (OELs) in TWA were relatively high for sulfuric acid (35.8%) and hydrogen chloride (16.5%) compared to the other acids (4.2%-6.6%). In addition, the percentages of exceeding 1% of OELs in STEL or Ceiling were higher for sulfuric acid (22.9%), hydrogen chloride (12.3%), and nitric acid (8.2%) compared to the other acids (1.2%-1.9%). The small-sized enterprises showed higher ELs in TWA; contrarily, the large-sized enterprises had higher ELs in STEL or Ceiling. Conclusions: The measurement characteristics and ELs identified in this study could be useful for establishing safety and health policies for inorganic acids.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.22-30
• /
• 2021

Objectives: The objectives of this study were to develop a quality control protocol of inorganic acids using ion chromatograph and to evaluate analytical proficiency of the legally designated agencies. Methods: This study prepared inorganic acid samples by injecting three anion certified solutions (chloride, nitrate, and sulfate) on the quartz filters. To investigate the storage stability and concentration consistency of the samples, 240 samples for each anion were tested at weeks 0, 2, 4, 8, 12, and 16 while storing at 4℃ and 25℃. To evaluate analytical proficiency, two separate testings were administrated for six skilled analysts and 46 analysts affiliated with legally designated agencies. Results: Average recoveries of the three ions after 16 weeks of storage were fairly high (over 95%). In addition, average recoveries (chloride = 97%, nitrate = 96%, and sulfate = 103%) after 16 weeks of storage at low temperate were relatively higher than those (94%, 93%, and 98%) at room temperature. The coefficients of variation (CV) for the three ions were less than 5% except for the sulfate sample at 5.56 ㎍ (CV = 12.4%). The average ratios of the concentration values analyzed by the legally designated agencies to the injected concentrations were close to 1. However, their CVs were relatively greater (chloride ≤ 49%, nitrate ≤ 14%, and sulfate ≤ 28%), which implies a need for quality control. Conclusions: The quality control protocol used in this study for the three inorganic acids can be utilized in the quality control for ion chromatography.

• 선박안전
• /
• 제11권
• /
• pp.49-54
• /
• 2003

Ⅰ. 레저용 쌍동선 선박의 초기 개략도와 설계 1. 서언 2. 레저선박 모덱개발의 단계 3. 초기 설계시 고려사항 4. 선형개발 5. 갑판설계 Ⅱ. 레저용 쌍동선의 Mould Plug 제작과정 및 제품 생산 과정 Ⅲ. 타국의 레저용 쌍동선의 승인 및 등록 절차와 방법 및 관리체계 Ⅳ. 레저용 쌍동선의 구조 및 구조설계 Ⅴ. 레저용 쌍동선의 인테리어 및 인테리어 설계 Ⅵ. 레저용 쌍동선의 전기장치와 가관장치 Ⅶ. 레저용 쌍동선의 안전설비 및 설치요령 Ⅷ. 레저용 쌍동선과 연계되는 사업 Ⅸ. 세계 유명 Boat Show의 소개와 레저 선박산업의 현재 Ⅹ. 한국 레저선박산업의 현실과 대응

• 산업안전기술지
• /
• 제2권1호
• /
• pp.17-23
• /
• 2002

용접작업공정은 기본적으로 2개 이상의 부재인물체나 재료를 상호 접합시키는 공정으로서 산업의 광범위한 분야에 이용되고 있다. 특히, 각종 설비, 교량의 구축 등에 필수적이며, 최근 고강도화, 경량화, 초정밀화를 추구하는 자동차, 항공기, 전자 및 광학기기, 가전제품 및 산업용기기 등의 품질경쟁력이 가공기술에 좌우됨에 따라 첨단 용접가공 프로세스가 개발되어 사용되고 있으나 대부분의 산업현장에서는 아직도 종래의 가스용접 및 전기용접장치를 많이 사용하고 있다. 따라서 산업현장의 실태는 유해.위험공정인 용접작업에 의하여 여전히 재래식 재해가 발생되어 사망 및 신체장애 재해가 다발하고 있다. 여기서는 교류아아크 용접작업과 $CO_2$ 아아크 용접작업 재해의 예방기술에 대하여 간략히 소개한다. 게재된 내용은 한국산업안전공단에서 제공된 자료를 발췌 정리한 것이다.(중략)

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.141-158
• /
• 2019

Objectives: An adverse outcome pathway is a biological pathway that disturbs homeostasis and causes toxicity. It is a conceptual framework for organizing existing biological knowledge and consists of the molecular initiating event, key event, and adverse output. The AOP concept provides intuitive risk identification that can be helpful in evaluating the carcinogenicity of chemicals and in the prevention of cancer through the assessment of chemical carcinogenicity predictions. Methods: We reviewed various papers and books related to the application of AOPs for the prevention of occupational cancer. We mainly used the internet to search for the necessary research data and information, such as via Google scholar(http://scholar.google.com), ScienceDirect(www.sciencedirect.com), Scopus(www.scopus. com), NDSL(http: //www.ndsl.kr/index.do) and PubMed(http://www.ncbi.nlm.nih.gov/pubmed). The key terms searched were "adverse outcome pathway," "toxicology," "risk assessment," "human exposure," "worker," "nanoparticle," "applications," and "occupational safety and health," among others. Results: Since it focused on the current state of AOP for the prediction of toxicity from chemical exposure at work and prospects for industrial health in the context of the AOP concept, respiratory and nanomaterial hazard assessments. AOP provides an intuitive understanding of the toxicity of chemicals as a conceptual means, and it works toward accurately predicting chemical toxicity. The AOP technique has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment. AOP can be applied to the assessment of chemical carcinogenicity along with efforts to understand the effects of chronic toxic chemicals in workplaces. Based on these predictive tools, it could be possible to bring about a breakthrough in the prevention of occupational and environmental cancer. Conclusions: The AOP tool has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment and has been widely used in the field of chemical risk assessment and the evaluation of carcinogenicity at work. It will be a useful tool for prediction, and it is possible that it can help bring about a breakthrough in the prevention of occupational and environmental cancer.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.51-57
• /
• 2022

In recent years, the government's urban housing expansion policy has resulted in increased construction and remodeling work of residential houses and apartments, causing more industrial accidents at elevator installation sites. Typically, accidents occur during the installation and dismantling of work scaffolds inside the hoistways or using non-standardized work scaffolds due to their structural instability. In view of this, the present study deals with the development of a standardized elevator system scaffolding that can be safely installed outside the hoistway, securing the work platform inside the hoistway. An improved version of the scaffolding system eliminates the need to enter the hoistway for the scaffolding installation, thereby preventing accidents.

• 한국산업보건학회지
• /
• 제33권2호
• /
• pp.247-264
• /
• 2023

Objectives: The study was to examine the features of three-dimensional(3D) face dimensions and to develop fit test panels for the labor population using respirators in South Korea. Methods: This study was part of the first-year work of a two-year-project conducted at Occupational Safety and Health Research Institute in 2021. After 3D head dimensions data were collected from Size Korea Center managing Sixth Size Korea databases, 3D face dimensions DB for the South Korean labor population was established for 21 items of face dimensions in line with the ISO/TS 16976-2 and KS A ISO 15535. With the South Korean labor population 3D face dimensions DB, in accordance with the ISO/TS 16976-2, the descriptive statistics of 3D face dimensions were calculated and two fit test panels were developed. Results: A total of 2,752 subjects were finally determined and they were 52.9% for male, 41.2% for the highest age-group of 15-29, and residents in the capital area. Mean and standard deviation were obtained for each of the 21 3D face dimensions items for the South Korean labor population. Among the items, male and female face widths were 137.6±5.7 mm, 133.2±5.0 mm, respectively. Male and female face lengths were 116.6±7.0 mm, 107.8±6.8 mm, respectively. Two new South Korean fit test panels, a bivariate test panel and a principal component analysis test panel, were developed using the 3D face dimensions DB as well. Conclusions: Using the 3D face dimensions DB, the mean and standard deviation were featured for each of the 21 items and also the two fit test panels were newly developed in the study. It is suggested that the study outputs should be utilized practically and effectively in selection, use, and management of respirators at work, expecting that respiratory protection can be furthermore improved for respirator users including labor population across the country.