• Journal of the Korea Construction Safety Engineering Association
• /
• s.40
• /
• pp.12-23
• /
• 2007

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2024

Objectives: To evaluate the levels of exposure to organic compounds during aircraft disinfection and seat cover replacement operations. Methods: According to the working schedule, organic compounds were collected using activated carbon tubes and then analyzed by GC/FID and GC/MSD. Results: In the disinfection task, the main substances listed in the material safety data sheet (MSDS) of the disinfectant were not detected. However, 1-bromopropane, which had been used in the previous task of replacing seat covers, was detected at a level of 2.37 ppm at the measurement time. During seat cover replacement, bonding workers were exposed to 2.48 ppm on an eight-hour time-weighted average, and seat cover replacement workers were exposed to 0.22 ppm. Conclusions: It is necessary to ensure the reliability of MSDS. A work environment management system is necessary when different companies alternate working in the same place.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.62-70
• /
• 2021

Representative systematic accident analysis methods proposed so far include AcciMap, STAMP, and FRAM. This study used these three techniques to analyze a fire accident case that occurred during routine manufacturing work in a domestic chemical plant and compared the results. The methods used different approaches to identify the cause of the accident, but they all highlighted similar causal factors. In addition to technical issues, the three accident analysis methods identified factors related to safety education, risk assessment, and the operation of the process safety management system, as well as management philosophy and company culture as problems. The AcciMap and STAMP models play complementary roles because they use hierarchical structures, while FRAM is more effective in analyses centered on human and organizational functions than in technical analyses.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.99-107
• /
• 2021

This study analyzes the differences in definitions and concepts of terms used in the statistical indicators of fatal occupational injuries per 100,000 workers among countries included in the ILOSTAT data explorer. In addition, improvement measures focusing on the limitations in international comparison are proposed. Five countries-the Republic of Korea, Germany, Japan, United Kingdom, United States-- were comparatively analyzed. These countries were selected according to the significance of differences in their definitions of workplace injuries, workers, and compensation insurance, and their reporting systems. Considering these differences before directly comparing statistical indicators of fatal occupational injuries per 100,000 workers among countries is necessary because the range of comparison groups and the definition of fatal occupational injury are different for each country. While one can also compare trends by country, it is necessary to investigate beforehand whether the criteria and methods for processing statistics have changed. Misinterpretation can be minimized by properly understanding the process and limitations of fatal occupational statistical indicators that may differ from country to country.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.464-470
• /
• 2023

Objectives: This study evaluated occupational exposures to noise and heat stress during routine non-outage works in three coal-fired power plants in the Republic of Korea. Methods: The data were collected during the summer of 2020. Full shift noise exposure of 52 workers were measured using noise dosimeters. Heat stress of 16 worksites were measured for 70 minutes using wet-bulb globe temperature monitors. Results: The noise dosimetry results revealed time-weighted averages that ranged from 47.5 to 88.9 dBA. 2 out of 52 noise measurements exceeded 85 dBA. Based on the arithmetic mean, the coal service group showed the highest level at 80.2 dBA by job tasks. Noise exposures exceeding 85 dBA were measured in the coal service and plant operator group. Heat stress index measurements ranged from 20.3℃ to 37.2℃. 1 out of 9 indices measured in coal facilities and 4 out of 7 indices measured in boiler house exceeded 1 hour TWA during moderate work. Heat stress indices measured from boiler houses were significantly higher than those measured from coal equipment. Conclusions: The results show that overexposure to noise and heat stress may be encountered during routine non-outage work activities in coal-fired power plants. Appropriate actions should be taken to reduce future health outcome from occupational exposure to noise and heat stress in the industry.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.42-55
• /
• 2022

In this study, an accident at an in-house maintenance subcontractor of a manufacturing company was analyzed using representative systemic analysis methods, and the results were compared to determine the socio-technical and organizational structure causal factors. Systemic accident analyses were performed using AcciMap, STAMP-CAST, and a method that utilizes work processing procedures. The causal factors derived from the three methods were classified according to HFACS classification criteria. AcciMap and STAMP-CAST analyses were able to derive legal problems and defects in organizational structure between the company and the subcontractors. The method that utilized the work processing procedures drew the most causal factors of the three methods but showed some limitations in deriving legal and facility-related problems. Most of the causal factors identified through the systemic methods could be classified according to the HFACS classification criteria, except for the legal and organizational structure matters. Socio-technical and organizational problems with a holistic perspective of the company and subcontractors could be found using systemic analysis methods. However, it is necessary to conduct analysis using various methods in order to derive more comprehensive measures to prevent accidents because each analysis method showed some limitations in the derivation or expression of some causal factors. The results of this study can be helpful in selecting and using an appropriate method for accident analysis.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.188-205
• /
• 2023

Objectives: Methanol poisoning accidents in smartphone parts manufacturing facilities were analyzed using a systemic accident analysis method, and the necessity and possibility of the application of this systemic method in the field of occupational health were reviewed. Methods: A STAMP model for accident analysis was created based on the previously published literature. CAST analysis was performed to find the causal factors of the components and between the components. Results: The STAMP model visually showed the abstract and complex system control structure. The CAST analysis results could include all the causal factors from the previously published literature, and presented them holistically. Additional causal factors that were not presented in the literature were found. Conclusions: The holistic accident analysis results in this study will be helpful to establish comprehensive measures to prevent methanol or other chemical poisoning accidents. Therefore, it will be necessary to use systemic accident analysis methods in the field of occupational health.

• The Safety technology
• /
• no.167
• /
• pp.6-10
• /
• 2011

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.13-21
• /
• 2021

Objectives: The purpose of this study was to evaluate the exposures of cashiers who work at expressway tollbooths. Methods: We measured temperature(temp.), relative humidity(RH), and contaminants with direct reading instruments at ten expressway toll gate in September 2015. Elemental carbon was collected on the quartz filters and analyzed with an OCEC analyzer. Results: The average levels for temp., RH, carbon monoxide, carbon dioxide, dust(PM10), and black carbon were respectively 24.6~27.8℃, 32.3~65.3%, 0.5~1.2 ppm, 456~559 ppm, 12~111 ㎍/㎥, and 3.1~10.1 ㎍/㎥ at each tollbooth. The concentrations of elemental carbon within the tollbooth(1.8~7.2 ㎍/㎥) were lower than outdoors(2.5~10.0 ㎍/㎥), but exhibited a high correlation(r2=0.855). The exposure levels for carbon monoxide, black carbon, and elemental carbon in the tollbooths were significantly higher than the offices. The concentrations of black carbon and elemental carbon showed a high correlation(r2=0.756). Conclusions: The levels of contaminants were below the occupational exposure limits in the expressway tollbooth. There were ventilation and air conditioning systems in the booths, but it is necessary to maintain and use the systems properly.

• 월간 기계설비
• /
• s.228
• /
• pp.64-73
• /
• 2009

건설현장의 안전사고는 안전불감증과 허술한 재난관리시스템으로 인한 인재(人災)가 대부분이다. 따라서 여름 장마철과 혹서기에 대비, 현장의 감전사고 및 침수 붕괴재해 예방, 그 밖의 수해방지대책 등을 수립해 현장근로자에게 사전교육을 철저히 하는 것이 재해예방의 첫걸음이다. 특히 재난관리시스템 및 매뉴얼을 구축한 뒤 재난 유형과 상활별 시나리오를 구성, 이를 바탕으로 사전교육과 모의훈련을 통해 긴급조치 및 대피계획을 수립 실시하는 등 구체적인 재해대책 요령을 숙지하면 재해를 줄일 수 있다. 본지는 회원사의 공사안전에 참고가 되도록 한국산업안전보건공단에서 제공한 장마철 혹서기 건설 현장 안전지침을 게재한다.