• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.440-448
• /
• 2023

Utilizing admixture, which is one of the raw material replacement method in the cement industry, is expected to be easily and quickly put to practical use as it is relatively more accessible than other methods. Among cement admixtures, limestone powder is reported to be able to improve cement performance through nucleation effects, chemical effects, and filler effects, so it is a material expected to be suitable as a cement admixture. Meanwhile, as high-quality limestone is depleted around the world, the use of limestone with clay or high magnesia (MgO) content is becoming increasingly inevitable. Therefore, in this study, we attempted to evaluate the suitability of limestone cement as a admixture by measuring the basic properties of limestone cement mixed with limestone of different qualities commonly used in Korea. As a result, the effect of alite reaction promotion was confirmed regardless of the chemical composition of the limestone binder. However, the dilution effect depending on the substitution amount was greater than the chemical composition. It is believed that normal-grade limestone can be used as a mixture as long as the limestone content in cement is within 15 % in this scope of study. In the future, we plan to evaluate the impact of the chemical composition of the limestone mixture through additional experiments depending on the chemical composition of cement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.97-104
• /
• 2023

The aim of this study was to produce polymer cement composites (PCCs) composed of polymer dispersion and cement as crack repair materials for RC structures, and to investigate their fundamental properties. The test mixtures for the study were based on EVA and SAE polymer dispersions, and the water-cement ratio was determined while varying the polymer-cement ratio(P/C) in four different levels (20%, 60%, 80%, and 100%) to achieve the desired viscosity of PCCs considering their fillability as crack repair materials. Additionally, silica fume was incorporated into P/C 80% and 100% specimens to enhance their stiffness. The basic properties of PCCs as crack repair materials, such as viscosity, flowability, fillability, tensile strength, elongation, and modulus of elasticity, were examined. The results showed that P/C depending on the type of polymer significantly affected the viscosity and flowability, and appropriate w/c ratios were needed to achieve the desired viscosity for the mixture design with consideration of fillability as crack repair materials for RC structures. All designed mixtures in this study exhibited excellent fillability. The tensile strength and elongation of PCCs satisfied the KS regulation for cement- polymer modified waterproofing coatings. The incorporation of silica fume improved the tensile strength and modulus of elasticity of PCCs. Depending on the type of polymer, mixtures using SAE showed better fundamental properties as crack repair materials for RC structures compared to those using EVA. In conclusion, SAE-based P/C 80% or 100% with the addition of up to 30% silica fume can be recommended as suitable mixtures for crack repair of RC structures.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.3
• /
• pp.223-237
• /
• 2023

The Seoul Onsu Industrial Complex, having been completed over 50 years ago, is an old industrial complex, with deteriorating infrastructure and factory buildings. Despite this, there's a current urban industrial agglomeration centered on the machinery industry in the Seoul Onsu Industrial Complex. This study aims to holistically analyze the physical deterioration of facilities in the aging industrial complex and the characteristics of industrial agglomeration to derive the identity of the Seoul Onsu Industrial Complex. Based on the research findings, the complex is seeing an enhanced urban industrial agglomeration due to the influx of small-scale businesses resulting from concentrated trade networks in the metropolitan area and plot subdivision, permission for noise-producing processes, and the ease of securing highly-skilled technicians. However, this agglomeration coexists with a weakening of the complex's production function, limited innovativeness of resident companies, and non-innovative features resulting from weakened competitiveness in the metropolitan machinery industry. In summary, the identity of the Seoul Onsu Industrial Complex is a 'Non-Innovative Urban Industry Agglomeration', an old industrial complex, witnessing non-innovative agglomeration based on a machinery industry network centered in the metropolitan area.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1059-1069
• /
• 2023

Dam-break flow occurs when an elevated dam suddenly collapses, resulting in the catastrophic release of rapid and uncontrolled impounded water. This study compares laminar and turbulent closure models for simulating three-dimensional dam-break flows using OpenFOAM. The Reynolds-Averaged Navier-Stokes (RANS) model, specifically the k-ε model, is employed to capture turbulent dissipation. Two scenarios are evaluated based on a laboratory experiment and a modified multi-layered block obstacle scenario. Both models effectively represent dam-break flows, with the turbulent closure model reducing oscillations. However, excessive dissipation in turbulent models can underestimate water surface profiles. Improving numerical schemes and grid resolution enhances flow recreation, particularly near structures and during turbulence. Model stability is more significantly influenced by numerical schemes and grid refinement than the use of turbulence closure. The k-ε model's reliance on time-averaging processes poses challenges in representing dam-break profiles with pronounced discontinuities and unsteadiness. While simulating turbulence models requires extensive computational efforts, the performance improvement compared to laminar models is marginal. To achieve better representation, more advanced turbulence models like Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS) are recommended, necessitating small spatial and time scales. This research provides insights into the applicability of different modeling approaches for simulating dam-break flows, emphasizing the importance of accurate representation near structures and during turbulence.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.80-96
• /
• 2023

The expansion of human activities and road development has led to the loss and fragmentation of ecological spaces, which is a negative factor for biodiversity. In particular, urban areas where land use and land cover have rapidly changed into urbanization zones are regions where ecological spaces are lost and isolated, making it difficult for wildlife to inhabit. Furthermore, the loss and fragmentation of ecological spaces due to urbanization can have a negative impact on ecosystem services. Therefore, to enhance biodiversity and ecosystem services in urban and national land, it is necessary to establish a practical ecological axis that reflects the current status of the city. Thus, this study analyzed the connectivity of ecological spaces and forest axis that can be used for spatial planning related to urban ecological axis of local governments in Daegu and Gyeongsangbuk-do. The ecological connectivity was analyzed by dividing the Daegu-Gyeongbuk region into 31 local government units, distinguishing between forests and natural areas using land cover data. Subsequently, the study area was divided into 20,483 hexagonal grids of 1 square kilometer each, and the restoration effects for ecological fragmentation within 100 meters were spatially clustered to visualize priority restoration areas. The forest axis was derived by considering regional conditions such as land cover, building area, slope, and others to connect 1,534 forests of 100 hectares or more. The research results are expected to be used as fundamental data for spatial planning, goal setting, and the selection of restoration areas for improving ecological connectivity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.91-99
• /
• 2024

Piping systems are crucial facilities used in various industries, particularly in areas related to daily life and safety. Piping systems are fixed to the main structures of buildings and facilities but do not support external loads and serve as non-structural elements performing specific functions. Piping systems are affected by relative displacements owing to phase differences arising from different behaviors between two support points under seismic loads; this can cause damage owing to the displacement-dominant cyclic behavior. Fittings and joints in piping systems are representative elements that are vulnerable to seismic loads. To evaluate the seismic performance and limit states of fittings and joints in piping systems, a high-stroke actuator is required to simulate relative displacements. However, this is challenging because only few facilities can conduct these experiments. Therefore, element-level experiments are required to evaluate the seismic performance and limit states of piping systems connected by fittings and joints. This study proposed a method to evaluate the seismic performance of an elbow specimen that includes fittings and joints that are vulnerable to seismic loads in vertical piping systems. The elbow specimen was created by connecting straight pipes to both ends of a 90° pipe elbow using flexible groove joints. The seismic performance of the elbow specimen was evaluated using a cyclic loading protocol based on deformation angles. To determine the margin of the evaluated seismic performance, the limit states were assessed by applying cyclic loading with a constant amplitude.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.39-50
• /
• 2024

Color is an essential visual element that has a significant impact on the formation of a city's image and people's perceptions. Quantitative analysis of color in urban environments is a complex process that has been difficult to implement in the past. However, with recent rapid advances in Machine Learning, it has become possible to analyze city colors using photos shared by tourists. This study selected Dali City, a popular tourist destination in China, as a case study. Photos of Dali City shared by tourists were collected, and a method to measure large-scale city colors was explored by combining machine learning techniques. Specifically, the DeepLabv3+ model was first applied to perform a semantic segmentation of tourist sharing photos based on the ADE20k dataset, thereby separating artificial elements in the photos. Next, the K-means clustering algorithm was used to extract colors from the artificial elements in Dali City, and an adjacency matrix was constructed to analyze the correlations between the dominant colors. The research results indicate that the main color of the artificial elements in Dali City has the highest percentage of orange-grey. Furthermore, gray tones are often used in combination with other colors. The results indicated that local ethnic and Buddhist cultures influence the color characteristics of artificial elements in Dali City. This research provides a new method of color analysis, and the results not only help Dali City to shape an urban color image that meets the expectations of tourists but also provide reference materials for future urban color planning in Dali City.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.69-78
• /
• 2024

Recently, the use of CCTV to prevent crowd accidents has been promoted, but research is needed to compensate for the spatial limitations of CCTV. In this study, pedestrian density was measured using drone footage, and based on a review of existing literature, a threshold of 6.7 people/m² was selected as the cutoff risk level for crowd accidents. In addition, we conducted a preliminary study to determine drone parameters and found that the pedestrian recognition rate was high at a drone altitude of 20 meters and an angle of 60°. Based on a previous study, we selected a target area with a high concentration of pedestrians and measured pedestrian density, which was found to be 0.27~0.30 per m². The study shows it is possible to measure risk levels by determining pedestrian densities in target areas using drone images. We believe drone surveillance will be utilized for crowd safety management in the near future.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.5-14
• /
• 2024

PHC piles demonstrate superior resistance to compression and bending moments, and their factory-based production enhances quality assurance and management processes. Despite these advantages that have resulted in widespread use in civil engineering and construction projects, the design process frequently relies on empirical formulas or N-values to estimate the soil-pile friction, which is crucial for bearing capacity, and this reliance underscores a significant lack of experimental validation. In addition, environmental factors, e.g., the pH levels in groundwater and the effects of seawater, are commonly not considered. Thus, this study investigates the influence of vibrating machine foundations on PHC pile models in consideration of the effects of varying pH conditions. Concrete model piles were subjected to a one-month conditioning period in different pH environments (acidic, neutral, and alkaline) and under the influence of seawater. Subsequent repeated direct shear tests were performed on the pile-soil interface, and the disturbed state concept was employed to derive parameters that effectively quantify the dynamic behavior of this interface. The results revealed a descending order of shear stress in neutral, acidic, and alkaline conditions, with the pH-influenced samples exhibiting a more pronounced reduction in shear stress than those affected by seawater.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.306-316
• /
• 2007

Based on a concept of soundscape, this study aims to investigate Koreans' preference for auditory elements, features, and impressions depending upon the season, and examine how these auditory factors of soundstape and seasons interact with each other and attempt to discover their influence on people's auditory preferences. According to an environmental psychological approach called the caption evaluation method, 45 college students examined the soundscape of Namwon City while racing the streets in four seasons. In order to analyze the interactions between seasons and such auditory factors as elements, features, and impressions, it was conducted the GLM univariate analysis and the NPAR tests for independent samples. The results of the analyses show that there are interactive effects between seasons and auditory factors like elements, features, and impressions and that the auditory factors have an effect on auditory preference. Moreover, as for seasonal preference for auditory elements, it was found that people prefer natural sound in spring, summer, and fall while they prefer social sound in winter. Concerning seasonal preference for auditory features, people place a focus on the behaviors in spring, summer, and winter while they stress the surroundings in autumn, as for seasonal preference for auditory impressions, they make much of sound characteristics in spring and winter but they value the atmosphere of streets in summer and fall. The results of this study can he utilized as useful data in determining which auditory factors among elements, features, and impressions to take into consideration in a soundscape design.