• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.68-77
• /
• 2017

High-frequency combustion instability results from a feedback coupling between the unsteady heat release rate and the acoustic waves formed resonantly in the combustion chamber. It can be modeled as thermoacoustic problems with various degrees of the assumptions and simplifications. This paper presents numerical analysis of self-excited combustion instabilities in a variable-length lean-premixed combustor and designs of passive control devices such as baffle and acoustic resonators in a framework of 3-D FEM Helmholtz solver. Nonlinear behaviors such as steep-fronted shock waves and a finite amplitude limit cycle are also investigated with a compressible flow simulation technique.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.22-26
• /
• 2000

2-Hydroxybenzaldehyde-5-Nitro-pyridylhydrazone (2HB-5NPH) was synthesized and its application in the spectrophotometric determination of vanadium ion(IV) was studied in the presence of surfactant. The optimum conditions of pH, solvent effect, concentration of ligand and surfactant were evaluated. The procedure was applied to determination of vanadium (IV) in mixture sample and real sample with satisfactory results (recovery ${\geq}$ 97% ; relative standard deviation ${\leq}$ 3.0% in the concentration range of $0{\sim}1.5{\mu}g/mL$ ; detection limit, $0.02{\mu}g/mL$ in solution).

• Clean Technology
• /
• v.27 no.1
• /
• pp.69-78
• /
• 2021

Vegetable oils, such as palm oil and cashew nut shell liquid (CNSL), are used as major raw materials for bio-diesel in transportation and bio-heavy oil in power generation in South Korea. However, due to the high unsaturation degree caused by hydrocarbon double bonds and a high content of oxygen originating from the presence of carboxylic acid, the range of applications as fuel oil is limited. In this study, hydrotreating to saturate unsaturated hydrocarbons and remove oxygen in mixed bio-oil containing 1/1 v/v% palm oil and CNSL on monometallic catalysts (Ni and Cu) and bimetallic catalysts (Ni-Zn, Ni-Fe, Ni-Cu Ni-Co, Ni-Pd, and Ni-Pt) was perform under mild conditions (T = 250 ~ 400 ℃, P = 5 ~ 80 bar and LHSV = 1 h-1). The addition of noble metals and transition metals to Ni showed synergistic effects to improve both hydrogenation (HYD) and hydrodeoxygenation (HDO) activities. The most promising catalyst was Ni-Cu/��-Al2O3, and in the wide range of the Ni/Cu atomic ratio of 9/1~1/4, the conversion for HYD and HDO reactions of the catalysts were 90-93% and 95-99%, respectively. The tendency to exhibit almost constant reaction activity in these catalysts of different Ni/Cu atomic ratios implies a typical structure-insensitive reaction. The refined bio-oil produced by hydrotreating (HDY and HDO) had significantly lower iodine value, acid value, and kinetic viscosity than the raw bio-oil and the higher heating value (HHV) was increased by about 10%.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.3-15
• /
• 1999

This paper includes the basic experimental results performed for developing an innovative and technologically feasible process wherein gaseous ozone, a powerful oxidant. is injected directly into vadose zone by which in-situ chemical degradation of semi- or, non-volatile petroleum product such as diesel fuel is derived. As ozone gas injected continuously(50mL/min, 119.0$\pm$6.1mg/L) into soil packed columns artificially contaminated with diesel fuel(initial concentration 1,485mg-DRO/kg/soil), the removal rates at the inlet and outlet point of 14hrs-operated column are 87.9% and 100.0%, respectively. On the other hand, soil vapor extraction system showed less than 30% of removal rates of residual diesel both at the inlet and outlet samples under the same experimental conditions which confirms the limited treatability of SVE in diesel contaminated soil.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.98-106
• /
• 2011

This paper reviews the state-of-the-art thermoacoustic(TA) modeling techniques and research trend to predict major parameters determining combustion instabilities in lean premixed gas turbine combustors. Linear TA modeling results give us an information on eigenfrequencies and initial growth rate of the instabilities. For the prediction, linear relation equation between acoustic waves and heat release oscillations should be derived in the determined system. Key information for this analysis is to determine the heat release fluctuations in the combustor, which is typically obtained by using n-${\tau}$ function from flame transfer function measurements and/or predictions. Great advancement in the linear TA modeling has been made over a couple of decades, and some successful prediction results have been reported in actual gas turbine combustors. However nonlinear TA model developments which are required to analyze nonlinear system behaviors such as limit cycle saturation and transition phenomena are still limited in a very simple system. In order to fully understand combustion instabilities in a complicated real system, nonlinear flame dynamics and acoustic wave interaction with nonlinear system boundary conditions should be explained from the nonlinear TA model developments.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.66-74
• /
• 1992

A method for the multiresidual simultaneous analysis of 11 thiocarbamates was studied using HPLC. Thiocarbamate in Chinese cabbage was analyzed in the order of extraction, partition, and cleanup in their optimum condition. Acetone was chosen as an extracting solvent. As a partitioning solvent, the mixture of 50% methylene chloride and petroleum ether containing extremely small water content showed good recoveries of thiocarbamate from the water layer. Partition efficiency was affected by pH of the water layer; it remained almost constant under the acidic and neutral condition while decreasing under the basic condition. The comparison done in cleanup step showed that the column chromatographic method is superior to the treatment of coagulating reagent. As an absorbent, the mixture of charcoal, magnesia, and celite with the ratio of 1 : 2 : 4 gave better recoveries and also effectively removed chlorophyll. Over the total procedure, the average recoveries for thiocarbamates in Chinese cabbage were 91% at about 2 ppm fortification level within the relative standard deviation of 8%, and the minimum detection limit (MDL) was 2.2${\sim}$9.3 ng.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.29-37
• /
• 2000

Because the previous design procedure for the composite wind turbine blade structure using trial and error method takes long time, a improved design procedure by using the program based on classical laminate theory was proposed to reduce the inefficient element. According to the improved design procedure, limitation of strains, stresses and displacements specified by international standard specification IEC1400-1 for the composite wind turbine blade were applied to sizing the structural configuration by using the rule of mixture and the principal stress design technique with a simplified turbine blade. Structural safety for strength and buckling stability was confirmed by the developed analysis program based on the laminate theory to minimize the design procedure. After modifying the preliminary design result with additional structural components such as skin, foam sandwich and mounting joints, stresses, strains, displacements, natural frequency, buckling load and fatigue life were analyzed by the finite element method. Finally these results were confirmed by comparing with IEC1400-1 specification.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.150-158
• /
• 2015

This article reports the development of an effective test procedure for detection of norovirus (NoV) in foods of diverse matrices. In this study, target foods included fermented milk, soybean paste, powders made from uncooked grains and vegetables, sesame leaves preserved in soy sauce, pickled mooli, and mooli. Viral recovery varied depending on the food matrices or elution buffers tested. Buffers were compared to determine effective elution buffers from artificially virus-contaminated foods. The conventional test procedure for concentrating viruses from food (elution-polyethylene glycol(PEG) precipitation-chloroform-PEG precipitation) was modified to save time by eliminating one PEG precipitation step. The modified procedure (elution-chloroform-PEG precipitation) was able to concentrate viruses more effectively than the conventional procedure. It also removed RT-PCR inhibitors effectively. The modified procedure was applied to target food for genogroup II NoV detection. NoV RNA was detected at the initial inoculum levels 3.125-12.5 RT-PCR units per 10-25 g tested food. The use of this newly established procedure should facilitate detection of low levels of norovirus in diverse foods.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.370-393
• /
• 2015

This study was conducted to compare STQ method, multi-residue method in Korean food code and QuEChERS method for validated selected and accuracy, reproducibility and efficiency. A total of 45 selected and targeted pesticides were the analyzed by GC and 5 of them were crops (apple, potato, green pepper, rice, soy bean). $R^2$ values were calculated in the standard calibration curve was over 0.990. Recovery tests were performed by three replications in two levels and the relative standard deviation of the repeated experiments was less than 30%. The average percentage of recoveries in the multi-residue method in Korean food code was 89.13%, QuEChERS method was 92.45% and STQ method was 85.28%. In addition, matrix effects in multi-residue method in Korean food code was 24.61%, QuEChERS method was 23.98% and STQ method showed 11.24%. The STQ method is easy and showed high clean-up effect in extracting the sample solution than the QuEChERS method and clean-up with C18, PLS, PSA cartridge columns. A large volume of the sample was injected in order to compensable for the problem, that occurred due to high detection limit in the analyser. When the STQ method was applied using a large volume injector, the standard calibration curve showed a higher linearity $R^2=0.990$, and method detection limit was 0.01 mg/kg. It showed an average recovery of 91.84% and the relative standard deviations of three replications repeated in two level process was less than 30% and had an average matrix effect of 17.90%.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.69-78
• /
• 2014

In the present study, we developed an official individual analytical method for cymoxanil using HPLC/UVD, respectively in different representative crops. Individual analytical methods for these pesticides are not included in the Korea food code. The samples were extracted with acetonitrile, concentrated and partitioned with dichloromethane and saturated sodium chloride solution. For cymoxanil, extracts were concentrated and clean-up through silica gel column chromatography with dicloromethane/acetone (60/40 v/v) and subjected to instrumental analysis. The limit of detection (LOD) for cymoxanil were 0.1 ng and 1 ng respectively and limit of quantitation (LOQ) were 0.02 mg/kg. Recoveries for cymoxail ranged from 79.6~107.6% respectively, at fortification level of 0.02 mg/kg (LOQ), 0.2 mg/kg (10 LOQ) and 1.0 mg/kg (50 LOQ) and the coefficient of variation (CV) was less than 10%, regardless of sample types. These results were further confirmed with LC/MS. The proposed simultaneous analysis method is reproducible and sensitive enough to determine the residues of cymoxanil in the agricultural commodities. According to the validation data and performance characteristics and high sample throughput, the proposed method is suitable for routine application.