• Membrane Journal
• /
• v.12 no.3
• /
• pp.143-150
• /
• 2002

Electrodialysis(ED) is a reliable and effective process for the separation and concentration of ionic compounds. However, commercial uses of ED are often hindered by the cost of the stack that mainly resulted from the ion-exchange membrane cost. In order to minimize the membrane cost, it is desired to operate ED at the highest practicable current density. In an actual ED system the high current operation is limited by the concentration polarization phenomenon. This article illustrates the transport phenomena of ions through ion exchange membranes using current-voltage relations as a characterizing method. Also recent studies on electroconvection and water-spitting phenomena caused by concentration polarization were reviewed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.519-525
• /
• 2005

An electrochemical evaluation on the corrosion resistance for heavy anticorrosive paint(DFT:25um) was carried out for 5 kinds of heavy anticorrosive paints such as high solid epoxy(HE), solvent free epoxy(SE). tar epoxy(TE), phenol epoxy(PE). and ceramic epoxy(CE). Corrosion current densities obtained by Tafel extrapolation method from anodic and cathodic polarization curves didn't correspond with the values obtained by AC impedance measurement, however, the values of polarization resistance obtained from the cyclic voltammogram showed a good tendency corresponding well with the values of AC impedance measurement. Futhermore there was a good correlation against the corrosion resistance evaluation between passivity current density of the anodic polarization curve and diffusion limiting current density of the cathodic polarization curve. And corrosion resistance increased with corrosion potential shifting to noble direction. From the results discussed above. HE and CE had a relatively good corrosion resistance than other heavy anticorrosive paints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.807-812
• /
• 2015

Li-ion batteries are energy sources that are widely used in applications such as notebooks, cellular phones, power tools, and vehicles. They are devices in which stored chemical energy is changed to electrical energy by electrochemical reactions. They have a high energy density, small size, and are lightweight. In particular, power tools and vehicles require high charge/discharge rates. Therefore, in this paper, we perform electrochemical simulations using a commercial finite-element analysis program to determine the high discharge-rate characteristics of Li-ion cells. In addition, by performing high discharge-rate simulations, we found that the limited discharge current was 63 A. Based on the results obtained, we investigate the behavior of Li-ion cells with a high rate of discharge.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.152-156
• /
• 2000

The effect of cupric ion concentration on the throwing power has been studied in the electrodeposition of Cu on the porous reticular electrodes with the electrolytes of $CuSO_4\;and\;H_2SO_4$. Sulfuric acid electrolytes with lower concentration of $CuSO_4$ improved throwing power in electrodeposition of copper not only due to higher cathodic polarizability but also due to higher conductivity of the electrolytes. The increase in conductivity of the electrolytes at low concentration of $CuSO_4$ could be also illustrated by the decrease in viscosity of the electrolytes. It was found that both the throwing power and the limiting current density should be taken into account in the electrodeposition of Cu on the reticular electrodes. According to the experimental results, the electrolyte of 0.2M $CuSO_4$ and 0.5M $H_2SO_4$ was found to be the most appropriate condition at the current density of $10mA/cm^2$.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.927-933
• /
• 1997

The effects of carbon black on the electrodes performance and on the structure of the catalyst layer in Raney nickel hydrogen electrodes for alkaline fuel cells were investigated by using electrochemical and nitrogen adsorption methods. The optimum content of carbon black in the catalyst layer of Raney nickel hydrogen electrode was 2wt%. The limiting current density was increased by the addition of carbon black due to the enlargement of gas-liquid interface area. The rate determining step at the limiting current density was supposed to be a step where hydrogen dissolves at gas-liquid interfaces.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.64-68
• /
• 2009

It has been observed that coated steel structures deteriorate more rapidly than the designed lifetime due to acid rain caused by air pollution, etc. Therefore, improving the corrosion resistance of anti-corrosive paint is very important in terms of safety and the economic point of view. In this study, the corrosion resistance of five kinds of anti-corrosive paints, including the Acryl, Fluorine, and Epoxy resin series, were investigated with electrochemical methods, such as corrosion potential measurements, polarization curves, diffusion limiting current density, etc. As a result, the corrosion resistance of the F101 specimen with the fluorine resin series was found to be superior to the other specimens, while E100 with the epoxy resin series also showed a somewhat good corrosion resistance. Furthermore, it was observed that the amount of water and oxygen entering the inner side of a painted film increased with an increase in immersion time, irrespective of the kind of resin series. However, the oxygen diffusion limiting current density of a specimen with good corrosion resistance was relatively decreased compared to other specimens, because of the difficulty of oxygen diffusion penetrating to the inner side of the film. Consequently it is suggested that we can qualitatively evaluate the corrosion resistance of an anti-corrosive paint by measuring the diffusion limiting current density as an electrochemical method.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.246-251
• /
• 2003

전기분해법을 이용하여 수용액 중의 질산성 질소의 환원거동에 대한 연구를 통하여 수용액중의 질산 함량을 제어하는 연구를 수행하였다. 촉매전극을 채택한 복극전해조에서 30분의 조업에 질산 100ppm 이하의 저농도 용액은 70%, 300ppm 이상의 고농도의 경우는 90%까지 질소를 용이하게 제거할 수 있었다. 초기 질소농도가 증가하면서 한계전류밀도도 크게 증가하였으며, pH가 감소할수록 환원전류가 증가하였다. 그리고 수용액의 pH는 질소 환원반응기구에 큰 영향을 주는 것으로 판명되었으며, 산성에서는 질소형태로 중성 혹은 염기성에서는 암모니아 형태로 환원되는 것으로 추정된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.191-191
• /
• 2015

해수에 침지되어 있는 금속에 음극방식법을 실시하게 되면 $OH^-$이온이 증가하게 된다. 이때 금속기판과 용액의 계면에서 pH는 상승하고, 석출하는 피막에 영향을 준다. 표면에 형성되는 피막은 주로 부르사이트(Brucite)이고, 이는 전기화학방식의 전형적인 석회질 피막(Calcareous Deposits Film)형성 메커니즘을 따른다. 본 연구에서는 음극에 흘려주는 전류밀도 및 양극의 영향을 분석하였으며 SEM, XRD, EDS를 이용하여 피막의 조성성분과 결정구조를 확인했다. 전착피막의 내식성은 AZ31-Mg 양극 사용 시 가장 우수하였고, 전류밀도는 $1{\sim}10A/m^2$중 $5A/m^2$에서 가장 우수한 밀착력을 보였다. 따라서 위와 같은 코팅 제작 프로세스에 대한 기초적인 설계 지침을 제시함으로서 천연코팅막의 한계를 보완 할 수 있을 것이라 사료된다.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.162-168
• /
• 2000

The influence of phenolsulfunate concentrations on electroplating characteristics and electrochemical behaviors was investigated with a viewpoint of electrolyte aging using the circulation cell and potentiostate And comparison of tinplate coating appearance such as glossiness and Image clarify has been also studied with varying of phenolsulfonic acid (PSA) solutions. As the aging of electrolyte proceeded, the limiting current density was moved to a lower current density region by the limitation of mass transfer, and higher phenolsulfunate concentrations resulted in the narrower optimum current density range and deterioration of coating surface of tinplates. The difference of the limiting current density was not remarkable with increasing electrolyte temperature. Thus the electrolyte aging was attributed to the limitation of thermally-activated process such as mass transfer of reducible ions. It has also been considered that the accumulation of phenolsulfonate suppressed normal electrotinning reaction by reducing the mobility of stannous ions, taking into account of the smaller effect of electrolyte aging. Experiments showed similar polarization behavior between the electrolyte of high phenolsufonate solution and the aged one, which comes to conclude that the accumulation of phenolsulfonate is one of the major causes of electrolyte aging.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.520-529
• /
• 1999

Exposure limits for human protection are determined by converting basic limits for induced current, SAR(specific absorption rate), or power density, which are based upon biological effects, to measurable electric and magnetic field intensities. As a part of studies for the establishment of a domestic guideline for exposure limits, the validity of the exposure limits of five representative guidelines or standards, which are derived from basic limits, are investigated in this paper, using the published results for coupling mechanisms of electromagnetic field into a human body, and problems in each standard are analyzed and compared with each other.