• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.31-41
• /
• 2006

The main purpose of this paper is to develop the practical method to estimate the congestion price in odor to overcome the difficulty of traditional microeconomics approach for demand and cost function concepts. In this paper, we estimate the theoretical congestion toll which reflecting the real traffic conditions such as a speed-density functions using a traffic engineering methods We calculates the optimal congestion toll based on the real traffic conditions assuming that the electronic road pricing (ERP) systems ave installed for the study road. After evaluating the various speed-density relationship methods. we found that the Drake model is best suited for the Gangbyeon Expressway Using the Drake model, the optimal congestion toll will be 94 to 3,255 Won for the traffic speed between 44km/h to 68 km/h based on wage rate method and 107 to 6,381 Won for the marginal substitution method for the Gangbyeon Expressway in city of Seoul, Korea.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.93-107
• /
• 2005

The estuary of Nakdong River area including Noksan industrial complex and Busan New Port is composed of thick unconsolidified sediments containing abundant clay, and thus is a potential hazardous area of ground subsidence. We analyzed mineral compositions and geotechnical properties of the clay sediments that sampled from 4 boreholes of the area, and examined vertical variations and their correlations. The results showed correlations between some mineral constituents and geotechnical properties of clay sediments. A positive correlation showed between quartz content and wet unit weight, whereas a negative correlation showed between quartz content and liquid limit. Feldspar content and water content showed a negative correlation, whereas content of clay minerals and liquid limit showed a positive correlation. And also, there is a negative correlation between content of clay minerals and wet unit weight. Correlation equations are obtained from the multiple regression analyses among plastic index, content of clay mineral, smectite and clay fraction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.2
• /
• pp.99-113
• /
• 1992

In general, TDMA and FDMA have been used for multiple access communication methods. Recently. However, ALOHA and CSMA protocols came to exist as new schemes for VSAT data networks and LANs, respectively. These schemes are proven to be effective for packet switched communication systems that has bursty traffic but packet collisions. In this paper we analyze capture statistics arising from fading channels in packet radio communication systems in the context of ALOHA protocol. We derive general results of the exact form of capture probabilities and present numerical data for wide range of fading parameters. Since the capture probabilities are found to approach zero when the number of transmitted signals become larger, we are able to determine the achievable channel throughput by a least squares fitting of an exponential-type function to the probabilities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.62-62
• /
• 2023

강우가 지표면 아래로 침투할 때 초기에는 투수층이 불포화 상태이어서 부압이 작용하면서 침투할 것이다. Richards 식(Richards, 1931)을 써서 불포화 투수층의 침투를 모의할 수 있다. 강우가 지속되는 동안 하상 아래 어느 구간은 포화 상태가 되어 Richards 식을 더 이상 사용할 수 없다. 하지만 현재까지의 연구는 Richards 식을 사용하여 침투를 모의하는 오류를 범하고 있다. 강우에 의한 침투를 예측할 때 지표면에서의 침투율 q_b 가 필요한 데 현존하는 연구에서는 Horton 식(Horton, 1941)을 사용하여 초기 침투율 f_o 와 장시간 후 침투율 f_c 와 시간에 따라 지수함수로 감소하는 계수 k 의 3가지 계수값을 실험이나 현장 관측값에서 찾아서 쓰고 있다. 그런데, 이 계수값은 강우강도 r_i 가 클수록 침투율 q 가 커지는 물리 현상을 반영하지 못하는 한계가 있다. 본 연구에서 먼저 포화 투수층에서의 침투를 모의하는 식을 개발하였다. 지표면 아래에서 불포화 투수층에는 Richards식을 사용하고 포화 투수층에는 개발한 식을 사용하여 침투를 모의하였다. 또한 지표면에서의 침투율 q_b 를 구하는 공식을 개발하였다. 하상에서의 침투율의 최대값은 $q_{bmax}=-{\lambda}{\sqrt{2g(s-b)}}$ 일 것이다. 여기서 λ 는 투수층의 공극율, s 는 유출수면의 위치, b 는 지표면의 위치이다. 지표면에서의 침투율의 최소값 q_bmin 은 지표면 바로 아래 지점에서의 침투율일 것이다. 지표면에서의 침투율 q_b 로 q_bmax 와 q_bmin 사이의 적절한 값을 선택한다. 강우강도를 r_i 라고 하면 지표면 위 유출수의 연속방정식은 다음과 같다: $s-b={\int}(r_i-{\mid}q_b{\mid})dt$. 즉, 유출수면의 위치 s 는 강우강도 r_i 가 클수록 또는 지표면에서의 유출율의 크기 |q_b| 가 작을수록 크다. 또한 지표면에서의 침투율 q_b 와 지표면 아래에서의 침투율 q 는 s - b 가 클수록 크다. 따라서, 강우강도 r_i 가 클수록 침투율 q_b, q 가 큰 현상이 잘 반영되었다. 강우-침투-유출 모형실험을 수행하여 강우강도에 따라 침투율과 유출량이 다른 현상을 관측하여 수치실험 결과와 비교·검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.151-154
• /
• 2021

Big data analysis is the process of discovering meaningful new correlations, patterns, and trends in large volumes of data stored in data stores and creating new value. Thus, most big data analysis technology methods include data mining, machine learning, natural language processing, and pattern recognition used in existing statistical computer science. Also, using the R language, a big data tool, we can express analysis results through various visualization functions using pre-processing text data. The data used in this study was analyzed for 21 papers in the March 2021 among the journals of the Korea Institute of Information and Communication Engineering. In the final analysis results, the most frequently mentioned keyword was "Data", which ranked first 305 times. Therefore, based on the results of the analysis, the limitations of the study and theoretical implications are suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.326-327
• /
• 2021

Newly, big data utilization has been widely interested in a wide variety of industrial fields. Big data analysis is the process of discovering meaningful new correlations, patterns, and trends in large volumes of data stored in data stores and creating new value. Thus, most big data analysis technology methods include data mining, machine learning, natural language processing, and pattern recognition used in existing statistical computer science. Also, using the R language, a big data tool, we can express analysis results through various visualization functions using pre-processing text data. The data used in this study were analyzed for 29 papers in a specific journal. In the final analysis results, the most frequently mentioned keyword was "Research", which ranked first 743 times. Therefore, based on the results of the analysis, the limitations of the study and theoretical implications are suggested.

• KDI Journal of Economic Policy
• /
• v.12 no.4
• /
• pp.97-111
• /
• 1990

This paper examines the effect of redistributive inheritance tax on income distribution and social welfare. The model used here is the Overlapping-Generations Model consisting of individuals with different bequest motives where the lifetime income distribution in each cohort is determined endogeneously by the dynamic bequest process. It is shown that the introduction of redistributive inheritance tax can improve the vertical equity in the sense that the increase in tax rate reduces the coefficient of variations of intra-cohort income distribution in steady-state. However, it is also shown that, the effect on social welfare, when measured by Benthamite SWF, is uncertain in general. The numerical simulations show that, in spite of its equity-enhancing effect, the tax increase can actually lower the steady-state social welfare within the plausible range of parametric values, through the long-run output effect as well as the deadweight welfare loss incurred by tax distortion. Hence, the problem of equity-efficiency trade-off can arise in this case. However, if both the market interest rate and the elasticity of marginal utility in individual's preference function are sufficiently high, it is shown to be possible that the steady-state social welfare is enhanced by the introduction of inheritance tax.

• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.444-455
• /
• 1991

An accurate and fast running NEDAR model for calculating radial power profile throughout fuel life in both solid and annular pellets for existing and advanced CANDU-PHWR-fuel was developed in this work. This model contains resultant flux depression equations and neutron depression data tables which have been developed for CANDU-PHWR fuel of pellet with the diameter 8.0 to 19.5 mm and enrichment 0.71-6.0 wt % U-235, over a bumup range of 0 to 840 MWh /kgU (35000 MWD/T). In order to obtain the neutron flux distribution in the fuel pellet, the CE-HAMMER physics code was run for a neutron flux spectrum appropriate to a CANDU-PHWR to give predictions of radial power profile for several ranges of fuel design parameters. The results, which were calculated by the CE-HAMMER physics code, were fitted to an equation which is solved in terms of Bessel and exponential functions in order to obtain the parameters, $textsc{k}$, $\beta$ and λ in the resultant equation. The present NEDAR model produce a radial profile which, when normalized to unity at the pellet surface, is slightly higher than the profile of the original ELESIM data table. The predictions of the fission gas release by KAFEPA-NEDAR are in slightly better agreement with the experiments than those of ELESIM. The NEDAR model described in this study has been shown to provide an effective, reliable, and accurate method for determining radial power profiles in CANDU-PHWR fuel rods without incurring a significant increase in computing time.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.75-86
• /
• 2002

This paper presents sedimentation and consolidation characteristics of dredged soils mixed with sand materials through the self-weight consolidation tests adopting stepwise filling method. After completely throwing away dredged soils daily by flour kinds of S-C, which is the quantity of sand contained, results fi:om laboratory tests are compared with those from a new method using hyperbolic, which considers stage settling and consolidating characteristics, and those from the existing analyzing method. Liquid limit up to 65% had a large effect on consistency properties. Assuming that the settlement occurred only by clay content of dredged soils, it is shown that the clay void ratio is less than 2 and 4 respectively in case S-C is 0% and 50%. In the applied hyperbolic method, reinitialized curve has a linear behavior of a coefficient of correlation of almost 1, and the coefficient of slope and intercept except fur the specimen with the height of 10cm and 20cm had a tendency to fellow exponent function and a shape of zone settling and dispersing settling. The results computed by the applied hyperbolic method rather than the existing analyzing method coincide with those of laboratory tests. It is shown that the former is more suitable than the latter for the area considering the influence, of sand materials.

• The Korean Journal of Applied Statistics
• /
• v.26 no.2
• /
• pp.335-347
• /
• 2013

There are various types of real world signals. For example, an electrocardiogram(ECG) represents myocardium activities (contraction and relaxation) according to the beating of the heart. ECG can be expressed as the fluctuation of ampere ratings over time. A signal is a composite of various types of signals. An orchestra (which boasts a beautiful melody) consists of a variety of instruments with a unique frequency; subsequently, each sound is combined to form a perfect harmony. Various research on how to to decompose mixed stationary signals have been conducted. In the case of non-stationary signals, there is a limitation to use methodologies for stationary signals. Huang et al. (1998) proposed empirical mode decomposition(EMD) to deal with non-stationarity. EMD provides a data-driven approach to decompose a signal into intrinsic mode functions according to local oscillation through the identification of local extrema. However, due to the repeating process in the construction of envelopes, EMD algorithm is not efficient and not robust to a noise, and its computational complexity tends to increase as the size of a signal grows. In this research, we propose a new method to extract a local oscillation embedded in a signal by utilizing the second derivative.