• Title/Summary/Keyword: 한계속도

Search Result 1,271, Processing Time 0.029 seconds

Evaluation of Civil Defense Evacuation Shelter Locations in Fitness according to the Walking Speed and Changing Floating Population in Time and Space (시공간 유동인구 변화와 보행속도에 따른 민방위 비상 대피시설 위치의 적절성 평가)

  • Park, Jae-Kook
    • Journal of Convergence for Information Technology
    • /
    • v.8 no.1
    • /
    • pp.95-103
    • /
    • 2018
  • This study set out to evaluate the fitness of shelter locations by taking into consideration service zones according to walking speed, the changing population between day and night, and walking routes. Walking speed was defined as 1.6 m/s, 2 m/s based on the cases of previous studies. The changing population between day and night was estimated with the dasymetric mapping technique. Shelter service zones according to walking speed and routes were analyzed with the network of the location allocation model. The findings show some shelters had limits with their capacity according to the changing floating population and walking speed in time and space and raise a need to appoint additional shelters.

A Study on the Installation of the Automated Speed Enforcement Camera for the Effectiveness (자동 과속단속시스템의 효과 증진을 위한 설치 방안 연구)

  • Kim, Yong-Seok;Cho, Won-Bum
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.5 s.83
    • /
    • pp.35-45
    • /
    • 2005
  • The speed enforcement camera has been regarded as one of the most important safety countermeasures. Drivers decelerate in front of the speed enforcement camera and gain speed up after passing the camera. So there is a strong need to develop the method how to place the camera to overcome this problem. This study applied the concept of design consistency to the installation of the camera, so speed difference along the road sections should be controlled within the predetermined boundary. Specially, this study also regarded camera as the one of the elements of the road alignments which can change the speed of drivers abruptly, and suggested the way to put this concept into the selection of the placement of the camera.

Trim Range and Characteristics of Autorotation(I): Rotor Speed Limit and Pitch Range (자동회전의 트림 범위와 특성(I): 로터 스피드 한계와 피치범위)

  • Kim, Hak-Yoon;Choi, Seong-Wook
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.39 no.6
    • /
    • pp.487-497
    • /
    • 2011
  • Numerical analysis has been performed to investigate the rotor speed and pitch range variations when the airspeed is increased in autorotation. Transient Simulation Method(TSM) was used to obtain the steady states of autorotation. The rotor blade was analyzed by the two-dimensional compressible Navier-Stokes solver in order to adapt to the airspeed increase and the results were used in the transient simulation method. Meanwhile, the Pitt/Peters inflow theory was used to supply the induced velocity fields. For the prescribed torque equilibrium state, the combinations of velocity, shaft angle, and pitch angle were produced to investigate the rotor speeds and variable ranges. The rotor tip Mach number and rotor speed were correlated and the trim range of pitch angle was observed with respect to the shaft angle decrease.

Gas Transfer and Hemolysis Characteristics of a New Type Intravenous Lung Assist Device (혈관 내 신형 폐보조장치의 기체전달 및 용혈 특성)

  • 김기범;권대규;정경락;이삼철
    • Journal of Biomedical Engineering Research
    • /
    • v.24 no.2
    • /
    • pp.121-126
    • /
    • 2003
  • The purpose of this work was to assess and quantify whether the beneficial effects in long-term gas exchange at exciting frequency were obtained at different frequencies as well and then to develop a vibrating intravascular lung assist device(VIVLAD), for Patients suffering from acute respiratory distress syndrome(ARDS) or chronic respiratory problems. We investigate the optimal condition of the frequency band excited with new vibrator at state of limit hemolysis when blood hemolysis came to through a membrane vibration action. The experimental design and procedures were given for a device used to assess the effectiveness of membrane vibrations. Quantitative experimental measurements were performed to evaluate the performance of the device . and to identify membrane vibration dependence on blood hemolysis. We developed an analytical solution for the hydrodynamics of flow through a bundle of sinusoidally vibrated hollow fibers that is used to provide some insight into how wall vibrations might enhance the performance of the VIVLAD. In the result, it was measured that the effect of various excited frequencies in gas transfer rate and hemolysis from the maximum gas transfer rate at no vibration when the maximum gas transfer rates showed at module type 6, module type 6 consisted of 675 hollow fiber membranes The maximum oxygen transfer rate was caused by the occurrence of maximum amplitude and transfer of vibration to hollow fiber membranes when it was excited by the frequency band of 7Hz at each blood flow rate. because this frequency became the End mode resonance frequency of the flexible in blood flow. Also, when module type 6 was excited at an excited frequency of 7Hz. blood hemolysis was low. Therefore, we decided that the limit of hemolysis frequency is 7Hz . because maximum amplitude occurred at this frequency.

A search on the Impossible Turn for Pilots (조종사에 있어서 Impossible Turn에 관한 고찰)

  • Song, Byung-Heym
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.2
    • /
    • pp.183-190
    • /
    • 1994
  • 본 연구에서는 항공기 사고의 대부분을 차지하는 이${\cdot}$착륙단계중에서, 이륙직 후 저고도에서 동력이 상실되었을 경우에 이륙활주로 방향으로 Turning Back하는 것은, 어떠한 안전 한계를 지니고 있는지를 선회 소요시간과 고도손실, 선회율과 활공속도와의 관계 등의 이론적인 근거에 기초하여 분석하고자 한다.

  • PDF

Removal Method of Signal Interference between Ultrasound Sensors (초음파 센서 간 신호 간섭 제거 방법)

  • Im, Hyungchul;Lee, Seongsoo
    • Journal of IKEEE
    • /
    • v.25 no.4
    • /
    • pp.584-590
    • /
    • 2021
  • This paper proposes a removal method of signal interference between ultrasound sensors where ghost signals due to interference are excluded and correct signal is recognized in distance mensurement using ultrasound sensors. The proposed method detects and excludes ghost signals when previous measured distance is compared to current measured distance and the distance difference exceeds a threshold. The threshold is fixed in conventional methods, so ghost signals cannot be correctly excluded when ultrasound sensor or target object move rapidly. On the contrary, to improve accuracy, the threshold is not fixed in the proposed method, and the threshold is adpatively determined based on the relative velocity when ultrasound sensor or target object move. Experiments of distance measurement with ultrasound signal interference are carried out where multiple ultrasound sensors of same type are exploited with maximum interference, and the results show that the proposed method efficiently exclude ghost signals.

Prediction of the Forming Limit Diagram for AZ31B Sheet at Elevated Temperatures Considering the Strain-rate Effect - II (변형률속도 효과를 고려한 AZ31B 판재의 온간 성형한계도 예측 - II)

  • Choi, S.C.;Kim, H.Y.;Kim, H.J.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2009.10a
    • /
    • pp.285-288
    • /
    • 2009
  • The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. Tensile tests and R-value tests were carried out at several levels of temperature and strain-rate from $25^{\circ}C$ to $300^{\circ}C$ and 0.16 to 0.00016/s, respectively to obtain the mechanical properties of AZ31B magnesium alloy sheet. The FLD of this material was experimentally obtained by limit dome height tests with the punch velocity of 0.1 and 1.0 mm/s at $250^{\circ}C$. The M-K theory-based FLD predicted using Yld2000-2d yield criterion was compared with the experimental results.

  • PDF

A study on the stability of turbulent diffusion flame in double swirl flows (이중선회류중의 난류확산화염의 안정화에 관한 연구)

  • 조용대;최병륜
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.6
    • /
    • pp.1669-1678
    • /
    • 1990
  • The annular and coaxial swirl flows between which LPG is supplied was selected to study the swirling flames in double co-swirl flows. The objective of this study is to research into the effects of double co-swirl flow conditions on the stability limit, the reverse flow boundary, and the time mean temperature distributions of the swirling flames. The increase of swirl intensity of axial flow makes the stability limit decrease, but the annular swirl flow (SM>0.5) makes stability and swirl intensity of axial flow increase, And the existence of axial swirl flow makes flame intensive and small in size, and this may be applicable to the design of high power compact combustor.

Design and Implementation of Multi-Level Spatial DBMS with Snapshot (스냅샷 데이터를 갖는 다중레벨 공간 DBMS 설계 및 구현)

  • Cheon Jong-Hyeon;Eo Sang-Hun;Kim Ho-Seok;Bae Hae-Young
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11b
    • /
    • pp.217-219
    • /
    • 2005
  • 최근 들어 무선 인터넷 및 모바일 기술이 급속한 발달을 이루면서 이동 객체의 위치에 기반 한 많은 서비스들이 개발되고 있다. 이 서비스에 사용되는 않은 어플리케이션들은 비교적 용량이 큰 공간 정보를 사용하여 최근에는 기존 디스크 기반 데이터베이스 관리 시스템이 제공할 수 있는 처리 속도보다 더욱 빠른 트랜잭션 처리를 요구하고 있다. 따라서 공간 데이터와 같은 대용량 데이터의 효율적인 처리와 폭주 하는 여러 사용자들에게 빠른 응답시간을 제공하여 주는 공간 DBMS가 요구되고 있다. 기존 디스크 기반의 공간 DBMS는 공간데이터와 같은 대용량의 데이터 관리가 가능하지만, 빠른 응답속도를 요구하는 여러 어플리케이션을 지원하기에는 무리가 있다. 반면에 메인 메모리 기반의 공간 DBMS는 불필요한 디스크 I/O를 없앰으로써 더욱 빠른 트랜잭션 처리를 지원하지만, 메인 메모리의 저장 한계로 대용량 처리에는 한계가 있다. 이러한 이유로 디스크 공간 DBMS의 장점과 메인 메모리 공간 DBMS의 장점으로 이루어진 다중레벨 공간 DBMS를 제안한다. 다중레벨 공간 DBMS는 디스크 기반의 공간 DBMS인 GMS시스템에 메인 메모리 데이터베이스와 그와 관련된 여러 컴포넌트들을 추가하여 개발 하였다. 제안된 시스템은 디스크 데이터베이스 기반의 대용량 데이터의 효율적인 관리와 메모리 데이터베이스 기반의 빠른 트랜잭션 처리를 보장한다.

  • PDF

Support Vector Machine based Ballistic Limit Velocity Measurement for Small Caliber Projectile (SVM 기반 소화기 방호한계속도 측정방법 연구)

  • Kim, Jong-Hwan;Baik, Seungwon;Yoon, Byengjo;Jo, Sungsik
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.19 no.5
    • /
    • pp.629-637
    • /
    • 2016
  • This paper presents a ballistic limit velocity measurement using the support vector machine that classifies two classes, the partial penetration and the complete penetration, by generating a linear separating hyperplane that equally divides the classes. For the ballistic limit velocity measurement, the previous methods(MIL-STD-662F and NIJ-STD-0101.06) have required a large number of experiments that caused high cost and time. However, the proposed method is not only flexible, requiring 0.85 ~ 4.8 times fewer experiments but also reliable, providing less than 2 % difference in results compared to the previous methods. For its validation, live fire experiments were conducted using various thickness SS400 iron plates as a target and two different types of live bullets such as 5.56 mm M193 and 7.62 mm M80.