• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.899-904
• /
• 2003

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based support for this integration is desirable. For this integration and process planning in the early design stage. the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function or product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• Electronics and Telecommunications Trends
• /
• v.21 no.1 s.97
• /
• pp.94-103
• /
• 2006

기지국/단말 모뎀 검증 장치(MAT)는 기지국(AS) 모뎀, 단말(UE) 모뎀으로 구성되는 초고속 무선 전송 시스템(HM20) MIMO 구조 기지국/단말 모뎀의 자체 기능 검증과 기지국 모뎀과 단말 모뎀의 연동 시험시 오류 원인을 분석하기 위하여 상향 링크(UL)와 하향 링크(DL)의 송. 수신단의 정합부에 디지털 및 아날로그 정합을 이용하여 기지국모뎀과 단말 모뎀이 정상적으로 동작하는지를 시험하게 된다. 모뎀 검증 장치(MAT)는 상향 링크 신호는 단말 변조기의 송신 신호 수신과 기지국 복조기에 변조 신호를 송신, 하향 링크 신호는 기지국 변조기의 송신 신호 수신, 단말 복조기에 변조 신호를 송신하는 기능을 수행하여 상향 링크 신호와 하향 링크 신호를 시험 및 분석하는 기능을 수행한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.46-53
• /
• 2014

In this paper, ku-band RF transceiver system is designed for the unmanned aerial vehicle(UAV) line-of-sight(LOS) datalink. The RF transceiver system is consisted of the transmitting and receiving unit, RF front-end unit, and high power amplification unit. The transmitting and receiving unit has the functions of frequency up/down converting and channel changing. The RF front-end unit has the functions of transmitting and receiving signal duplexing, antenna selection, small signal amplification, and frequency filtering excluding the receiving signal. The high power amplification unit has the functions of ku-band power amplification and transmitting power variation(High/Middle/Low/Mute). The frequency up/down converting of transmitting and receiving unit is designed by using the superheterodyne method. The RF transceiver system is designed to obtain the broadband and high linearity properties for the reliable transmission and reception of high data-rate and high speed data. Also, the channel changing function is designed to use selectively the frequency as the operation environment of UAV.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.259-262
• /
• 2000

본 논문은 전탐색 블럭매칭 움직임추정 VLSI 구조에서 클럭당 두연산(하나는 클럭의 상향에지, 하나는 하향에지에서 동작)을 수행하는 PE(Processing Element)를 교번적으로 결선, 클럭의 상향에지는 물론 하향에지에서도 동작하도록 하는 방식으로 클럭 사이클수를 줄이는 VLSI 구조를 제안한다 기존 구조에 그대로 적용되는 본 방법은 공급 데이타폭이 2 배, PE 의 HW 복잡도가 1.5 배 절대차 합 연산의 복잡도가 2 배로 늘어나 전체 하드웨어가 복잡해지나, PE수를 2배로 하여 클럭사이클수를 줄이는 방법에 비해서는 매우 효율적이다. 본 제안 구조는 계층적 움직임 추정 알고리듬을 사용한 MPEG-2 움직임 추정기 개발의 설계에 적용하여 기능과 HW 복잡도를 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.456-468
• /
• 2008

In this paper, we design Input/Output modules as a preference work for implementation of hybrid two stage AWG based WDM-PON and verify operations of each function modules through the logic simulation. This WDM-PON system provides service to 128 ONUs through 32 wavelength and one wavelength is shared for upstream transmission with four ONU while each wavelength is allocated to each ONU for downstream transmission. The designed WDM-PON MAC chip is based on sub-MAC which consists of one control unit and reception unit and four transmission unit. To design the reception and transmission unit of sub-MAC, we define the functions of the sub-MAC, pins of the modules, control signal and timing of each signal. We intend to design MAC chip with 1Gbps transmission rate. Thus the designed MAC chip is worked on 125MHz clock rate. We define FSM and design Input/Output modules with VHDL. The logic simulation of the modules is executed by the ModelSIM simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.646-656
• /
• 2008

In this paper, we design and verify the MAC chip of the two-stage AWG-based WDM-PON which considers 128 ONUs and 32 wavelengths. Each wavelength with the capacity of 1Gbps is allocated to ONU for downstream transmission but each wavelength for upstream transmission can be shared by four ONUs. Therefore, MAC protocol is required to avoid the collision and use the network resource efficiently among ONUs which are sharing the same wavelength. To design a request/permit-based MAC protocol, we define a unit-chip module called sub-MAC. The WDM-PON with 128 ONUs can be implemented by using 32 sub-MAC modules. The sub-MAC consists of one control unit, one receipt unit and four transmission units. The state transition diagram of the module is described by the internal/external control signals among the functional units. The function of the sub-MAC module is verified through logic simulation using ModelSIM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.91-99
• /
• 2008

In this paper, we design the function of ULSLE(Upper Layer Shared LAN Emulation) to provide both the efficient LAN service and compatibility with 802.1D bridge in Hybrid two-stage AWG based WDM-PON. The ULSLE layer lies above MAC control layer in order to provide a mean to interface WDM-PON and 802.1D bridge. It also performs LAN emulation based on PON-Tag which is only used to decide both the transmission mode and the destination of frames transmitted from ONUs. That is, the PON-Tag is not used for downstream frames but destination address field in original frame instead. This decreases the processing overhead and complexity caused by PON-Tag at OLT and ONU. The verification of designed ULSLE is performed according to the specific scenarios based on transmission mode and destination using OPNET.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1802-1806
• /
• 2009

최근 들어 국내외에서는 하천환경 및 생태서식처 기능을 갖는 자연형 하천으로의 복원에 대한 연구가 활발히 진행되고 있다. 이러한 하천복원의 범주에서 하천 내 설치되는 수공구조물에 대한 중요성이 많이 언급 되고 있는데 그 중 대표적인 것으로 수제를 들 수 있다. 하천 내 설치하는 수제(groyne)는 제방보호 및 유로변경의 목적으로 하천내에 시공되는 구조물 중의 하나로서 하천복원과정에 있어 필수불가결한 구조물 중의 하나로 인식되고 있다. 근래에 들어 경제성 및 환경성을 갖는 수제에 대한 연구로 변형수제에 대한 연구들이 진행 되고 있는데 변형수제의 대표적인 형상으로는 L형, T형 수제 및 굴절, 열쇠형 수제 등이 있다. 각각의 수제들은 그 형상에 따라 수제주변에서 국부적인 흐름구조가 다르게 발생하게 된다. 이러한 수제들은 수제 고유의 형태에 대한 흐름특성 연구들이 주로 이루어지고 있는 반면에 수제의 투영길이에 대한비교는 수행되지 않았다. 즉 동일한 수제길이를 갖더라도 설치각이나 형태에 따라 투영면적에 대한 유수단면적의 변화가 발생하게 된다. 본 연구에서는 그림과 같이 상향 또는 하향굴절수제를 대상으로 팔길이(AL)의 변화를 주었으며, 팔길이 변화로 인해 발생되는 투영길이(L')와 동일한 길이를 갖는 연직수제를 제작하여 흐름특성을 관측하고 비교하여 보았다. 수제는 군집 형태로 건설되는 것이 일반적이나 여러 가지 형태의 조합으로 건설되기도 하는데 이러한 투영길이에 대한 비교는 수제설계 시 기초자료로 활용될 수 있을 것이다.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.39-47
• /
• 2005

The range of hardware implementation increases in communication systems as high-speed processing is required for high data rate. In the broadband wireless access (BWA) system based on IEEE standard 802.16 the functions of higher part in the MAC layer to Provide data needed for generating MAC PDU are implemented in software, and the tasks from formatting MAC PDUs by using those data to transmitting the messages in a modem are implemented in hardware. In this paper, the interface hardware for efficient message exchange between MAC and PHY layers in the BWA system is designed. The hardware performs the following functions including those of the transmission convergence(TC) sublayer; (1) formatting TC PDU(Protocol data unit) from/to MAC PDU, (2) Reed-solomon(RS) encoding/decoding, and (3) resolving DL MAP and UL MAP, so that it controls transmission slot and uplink and downlink traffic according to the modulation scheme of burst profile. Also, it provides various control signal for PHY modem. In addition, the truncated binary exponential backoff (TBEB) algorithm is implemented in a subscriber station to avoid collision on contention-based transmission of messages. The VLSI architecture performing all these functions is implemented and verified in VHDL.