• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.13-17
• /
• 2004

We have investigated the effect of Hf insertion in the Al oxide tunnel barrier on the properties of magnetic tunnel junctions (MTJs). MTJs with Hf inserted barrier show the higher tunnel magnetoresistance (TMR) ratio and less temperature and bias voltage dependence of TMR than MTJs with a conventional Al$_2$O$_3$ barrier. The enhancement of TMR ratio and the reduction of the temperature and bias voltage dependence might be due to the reduction of defects in the barrier. Al-Hf oxide was formed by depositing Al and Hf simultaneously, and oxidizing the compound films. The TMR ratio of 36% was almost the same value as that with Hf inserted barrier. This implies that the inserted Hf layers mixed with Al layers during deposition or oxidation, and they might form Al Hf oxide barriers. This compound Al Hf oxide formation may be responsible to reduction of defect concentration which enhanced the TMR ratio and reduced temperature and bias-voltage dependence.

• Composites Research
• /
• v.31 no.5
• /
• pp.260-266
• /
• 2018

This study investigates thermal and mechanical characterization of Hafnium carbide coating on the $C_f-C$ composites. The hafnium carbide coatings by vacuum plasma spray on the C/C-SiC composites are prepared to evaluate oxidation and wear resistance. We perform the thermal durability tests by thermal cycling at $1200^{\circ}C$ for 10cycles in air and investigates the weight change of each cycle. We also evaluate the wear and indentation behavior using tungsten carbide ball indenter as a mechanical evaluation. As a result, the HfC coating is beneficial to reduce of weight loss during thermal cycling test and improve the elastic property of C/C-SiC composite. Especially, the HfC coating improves the wear resistance of C/C-SiC composite.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.3-9
• /
• 2016

Separation of Zr(IV) and Hf(IV) from sulfuric acid solutions was investigated by extraction with several acidic extractants such as Versatic acid, LIX 63, and Cyanex 301. From strong sulfuric acid solutions, the separation of Zr(IV) and Hf(IV) by Versatic acid and LIX 63 was not possible, while selective extraction of Hf(IV) over Zr(IV) was obtained with Cyanex 301. However, the extraction percentage of the two metals was much lower compared to that by D2EHPA. Mixing of TBP with Cyanex 301 and D2EHPA led to negative effect on the extraction and separation of the two metal ions. The difference in the extraction reaction and separation selectivity between HCl, $HNO_3$ and $H_2SO_4$ media with each extractant was discussed.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.19-25
• /
• 2013

Solvent extraction experiments have been conducted to separate Zr(IV) and Hf(IV) from chloride solutions by using LIX63 and Cyanex301. Zr and Hf were extracted by cation exchange reaction in the pH range from 1 to 4 by the extratants. Since the extraction percentage of the two metals was similar to each other, it was difficult to separate the two metals by using LIX63 or Cyanex301. Use of a mixture of LIX63/TBP or Cyanex301/TBP resulted in antagonism in our experimental ranges. Our data showed that there is some possibility of separating the two metals by the mixture of Cyanex301 and TBP because the extraction percentage of Hf decreased more rapidly than that of Zr as HCl concentration was decreased. The mixture of LIX63 and Cyanex301 had little effect on the separation of the two metals.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.60-60
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.85-85
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.289.2-289
• /
• 2002

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.71-79
• /
• 1993

Positron annihilation characteristics and microhardness of 25% cold worked and isochronally annealed hafnium specimens were measured to study recovery and recrystallization stages of hafnium specimens. The annihilation lifetime of positrons in hafnium has been measured for the distinct cases of annihilation in the annealed lattice and annihilation after trapping at lattice defects generated by cold deformation at room temperature. The annihilation lifetime in the annealed lattice was 187 $\pm$3.7 psec, whereas it was 217 $\pm$ 4.2 psec for positrons trapped at deformation-induced defects (mostly dislocations). The changes in Doppler broadening and hardness showed similar trend in the recrystallization range, however, the measured value of Doppler broadening variation were quite sensitive to changes in the recovery region in which the variation in hardness value was completely insensitive. Recovery of cold worked hafnium initiated at about 623 K and recrystallization occurred at around 1023 K.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.37.2-37
• /
• 2003

• Composites Research
• /
• v.33 no.4
• /
• pp.205-212
• /
• 2020

In this study, HfC was coated on two types of carbon/carbon composites coated with SiC by vacuum plasma spraying(VPS). The experiment was performed using a plasma wind tunnel with heat flux of 5.06 MW/㎡ for 120 s heat flux before and after the coating. The mass ablation rate was calculated through the mass change before and after the test, and the length change was measured by using calipers and high speed camera. The oxidation/ablation behavior were observed by FE-SEM with EDS analysis of the specimens cross section. The plasma wind tunnel test results showed that the coated specimens had low weight loss and length change, and high oxidation/ablation resistance. However, two types of the specimens tested under the same conditions were different in the ablation behavior and ablation rate, and it was evaluated that the cylindrical type had higher oxidation/ablation resistance.