• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2012

In spite of high resistant to corrosion and its strength, over the last two decades, concerns still remain about the durability of FRP materials under severe environmental and thermal exposures. In this paper, authors experimentally examine the combined degradation by thermal and chemical attacks in heterogeneous FRP rebar be made up with various fibers and resins. Five types of Carbon, Glass and Hybrid FRP rebars had manufactured by different process and surface patterns are adopted for the experiments such as weight change, interlaminar shear strength, SEM and FT-IR analysis. FRP specimens were immersed in alkaline or distilled solution up to 150 days and then thermal exposed on 60, 100, 150 and $300^{\circ}C$ for 30 minutes. From the test results, the degradation of FRP bars are influnced by the resin type and manufacturing process as well as the fiber, and ILSS of exposed FRP bar in solutions is slightly increased in initial stage and then decresed with the passing of immersed time. But, in this test, it is observed that the discrepancy of ILSS between degraded by alkaline solution and distilled water is negligible value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1288-1296
• /
• 2012

A candidate hybrid satellite and terrestrial network architecture, MSS/ATC(Mobile Satellite Service/Ancillary Terrestrial Component), is proposed for utilizing efficiently the exist MSS bands. Studies on the adjacent channel interference from the existing terrestrial mobile services and MSS/ATC itself are important to allocate a new ATC service frequency in MSS band. In this paper, we have analyzed the minimum permission power of terrestrial base station and the capacity loss with parameters of ACIR, number of MS(mobile Station) and MES(Mobile Earth Station) in uplink, and also, the capacity performance based on 1 beam and 1 cell assumption for MSS/ATC in downlink. The ACIR requirements are estimated in two MSS/ATC frequency allocation scenarios for 5 MHz and 10 MHz guard band to share spectrum with adjacent systems, and according to these ACIR requirements the service coverage and the receiver filter for ATC system should be designed in near future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.119-125
• /
• 2016

This study examined the running dynamic characteristics of a hybrid type wheel-rail high speed train, in which the propulsion method of maglev is applied. A wheel-rail high speed train propelled by a superconducting linear synchronous motor (SC-LSM) is expected to be superior to a maglev train regarding economical and interoperable aspects, still having powerful thrust force as maglev. In this paper, regarding the two methods of applying the SC-LSM to an existing wheel-rail train, to investigate the influences of SC-LSM propulsion on the dynamic characteristics of wheel-rail high speed train, the dynamic model of train including interaction between the rotor and stator of SC-LSM is established. Through the simulation using the model, the influence of the interaction between the rotor and stator of SC-LSM on stability, ride comfort and the effect of guideway irregularity are investigated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.71-81
• /
• 2014

It is an important issue to evaluate the effectiveness of chemical warfare through modeling and simulation(M&S) technology. In this paper, we propose the M&S methodology and environment for the chemical warfare for effectiveness analysis. In detail, for modeling perspective, we propose three fundamental component models according to their behaviors, which are a chemical weapon, a detecting device system, and an engaging unit system. Among proposed models, the chemical weapon and the detecting device system models are represented by engineering-level system models, whereas the engaging unit system model are described as an engagement-level system model. For simulation perspective, we apply a hybrid simulation environment using High Level Architecture (HLA) to interoperate with the proposed engineering and engagement-level models. The proposed M&S methodology and environment enables to evaluate the effectiveness of the chemical warfare system considering the doctrines, the performance of device or weapon, and weather factors. To verify the efficiency of the proposed methodology and environment, we experimented three categorized case studies, which are related with those considering factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1976-1979
• /
• 2008

Studies on binary adder have been variously developed. According to those studies of critical worst delay and mean delay time of asynchronous binary adders, carry select adders (CSA) based on hybrid structure showed 17% better performance than ripple carry adders (RCA) in 32 bit asynchronous processors, and 23% better than in 64 bit microprocessor implemented. In the complicated signal processing systems such as RSA, it is essential to optimize the performance of binary adders which play fundamental roles. The researches which have been studied so far were subject mostly to addition algorithms or adder structures. In this study, we analyzed and designed adders in an asp;ect of synthesis method. We divided the ways of implementing adders into groups, each of which was synthesized with different synthesis options. Also, we analyzed the variously implemented adders to evaluate the performance and area so that we can propose a different approach of designing optimal binary adders.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1734-1741
• /
• 2007

In this paper, the Hybrid SC/MRC-2/4 method in which bit synchronization and phase synchronization were not required was applied to the orthogonal MC DS-CDMA system in which each normalized subcarrier interval and processing gain had the same value, respectively, and the direct sequence spread code of each subcarrier was orthogonal. In the broadband wireless system in which multi-carrier transmission was used, a Doppler frequency shift occurred, which was caused by the difference between the highest subcarrier frequency md the lowest subcarrier frequency. In order to complement phase error caused by the shift, the orthogonal MC DS-CDMA system was analyzed so that the receiving signal could be perfectly synchronized by adjusting the PLL gain suitable for the entire system. As a result of simulations, as the PLL gain was increased, the change in the intervals was close to the case of perfect synchronization however, it became less when the PLL gain reached more than a certain value. Therefore, by selecting a proper PLL gain suitable for the system the orthogonal MC DS-CDMA can be designed in which the Hybrid SC/MRC method is applied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.61-61
• /
• 2019

우리나라는 대부분이 산지(약 65%)로 구성되어 있어 강우 시 그 공간적 분포의 변동성이 매우 큰 편이며, 특히 전형적인 산지지형인 댐 유역의 경우 고도 변화 등에 기인한 지형특성 등에 따라 강우의 형태 및 패턴과 이에 따른 유출변화가 큰 복잡한 특성을 갖는다. 이로 인해 단순히 지점강우들을 공간보간(평균)한 면적강우를 홍수 유출모의 등에 활용할 경우 그 신뢰도가 매우 낮은 경우가 많아, 수문모의에 있어 레이더에 기반을 둔 공간 분포형 강우 등의 도입 검토가 요구된다. 한편, 최근 기상청에서는 보다 정확한 레이더 강수량 추정 값의 제공을 위해 "레이더-AWS 강우강도(Radar-AWS Rainrates, RAR)" 산출 기술을 지속적으로 개선하고 있으며, 이는 지상 우량계 대비 상당한 정확도를 보이고 있다. 본 연구에서는 국내 산지지형을 대표하며, 타 댐 유역에 비해 비교적 수문(수위/유량)관측소와 자료가 많은 용담시험유역에 기상레이더 강수량 추정 값(RAR)을 적용해 산지지형 댐 유역에서 강우의 시공간적 변동성과 이에 따른 홍수량의 정확한 분석을 통해 홍수 시 댐 유입량의 정확한 산정 등에 활용할 목적으로 홍수 유출모의를 수행하고자 한다. 모의에는 최근 5년(2014~2018년)동안 발생한 비교적 독립적인 1~2개(연도별)의 홍수사상을 적용하였으며, 모형은 분포형 강우를 적용할 수 있는 비교적 간단한 모형인 HEC-HMS를 활용하였다. HEC-HMS는 주로 집중형 수문모형(Lumped Hydrologic Model)으로 분류되어 레이더 강우와 같은 분포형 자료의 입력을 주로 적용치는 않고 있지만, HEC-GeoHMS와 ModClark 방법을 활용하면 격자단위의 분포형 강우를 적용할 수 있는 형태의 모델 구축이 가능하다. 모의 결과는 기존 유역평균 강우를 적용한 방법과 비교를 통해 그 개선점을 검토하고자 하며, 이를 통하여 산지지역 댐 유역의 홍수특성을 보다 더 정확하게 분석해보고자 한다. 한편, ModClark을 적용한 홍수 유출모의는 단순히 소유역별 도달시간의 격자별 비율을 고려한 홍수추적으로 그 해석상의 한계가 있어, 최근 개발된 하이브리드 수문모형(Hybrid Hydrologic Model, Distributed-Clark) 등도 동일유역에 대해 도입 적용할 계획에 있다.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.630-644
• /
• 2021

This study was conducted to develop evidence-based nursing practice guideline for the prevention of VAP. This is a methodological study to develop guideline and verify the effectiveness according to the hybrid method of the NECA. Topics and key questions were derived through literature review and interviews, and recommendations were converged and developed through guidelines review and SR and meta-analysis. This was verified through the RAND and evaluated through AGREEII. The clinical feasibility of the nursing practice guideline, consisting of 44 recommendations in 9 categories, was evaluated by 122 ICU nurses. Conclusively this evidence-based nursing practice guideline for the prevention of VAP was confirmed methodological quality and content validity and was suitable for our nursing practice environment.

• Composites Research
• /
• v.33 no.6
• /
• pp.415-420
• /
• 2020

The interfacial properties in carbon fiber composites, which control the overall mechanical properties of the composites, are very important. Effective interface enhancement work is conducted on the modification of the carbon fiber surface with carbon nanotubes (CNTs). Nonetheless, most surface modifications methods do have their own drawbacks such as high temperatures with a range of 600~1000℃, which should be implemented for CNT growth on carbon fibers that can cause carbon fiber damages affecting deterioration of composites properties. This study includes the use of in-situ interfacial polymerization of polyamide 610/CNT to fabricate the carbon fiber composites. The process is very fast and continuous and can disperse CNTs with random orientation in the interface resulting in enhanced interfacial properties. Scanning electron microscopy was conducted to investigate the CNT dispersion and composites morphology, and the thermal stability of the composites was analyzed via thermogravimetric analysis. In addition, fiber pull-out tests were used to assess interfacial strength between fiber and matrix.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1079-1085
• /
• 2020

Fuzzing is used to find vulnerabilities for a library. Because library fuzzing only tests the implemented functions, in order to achieve higher code coverage, additional functions that are not implemented should be implemented. However, if a function is added without regard to the calling relationship of the functions in the library, a problem may arise that the function that has already been tested is added. We propose a novel method to improve the code coverage of library fuzzing. First, we analyze the function call graph of the library to efficiently add the functions for library fuzzing, and additionally implement a library function that has not been implemented. Then, we apply a hybrid fuzzing to explore for branches with complex constraints. As a result of our experiment, we observe that the proposed method is effective in terms of increasing code coverage on OpenSSL, mbedTLS, and Crypto++.