최근에 인도와 유럽을 중심으로 기존의 AC 송전계통 중 일부를 DC 송전계통으로 대체하는 하이브리드형 송전방식에 대한 연구가 진행중이다. 따라서 본 연구는 기존에 연구되고 있는 하이브리드형 가공송전계통을 기반으로 지중송전계통을 포함한 하이브리드형 혼합송전계통이 향후 머지않아 국내에서 계획 및 건설될 것을 대비한 초기 연구로서 진행하였다. 본 논문의 관점은 하이브리드 혼합송전계통 중 지중송전계통구간에서 DC 선로가 AC선로로부터 얼마나 고조파 전압 및 전류 측면에서 영향을 받는가를 평가하고, 이를 근거로 DC 케이블의 배열을 선정하고자 한다. 또한 DC 케이블 배열 선정을 위해 가능성이 있는 여러 개의 CASE별로 구분하고, 가장 타당한다고 평가되는 배열을 제안하고자한다. 본 연구에서 계통 모델링 및 해석은 EMTP를 이용하였다.
Transactions of the Korean Society of Mechanical Engineers B
/
v.35
no.8
/
pp.773-779
/
2011
In order to improve fuel economy and emissions, many studies of HEV have been conducted. However, most of these studies concentrate on parallel or power-split HEVs. Series-type HEVs have some advantages over parallel and power-split HEVs. One is that the engine is operated at high efficiency since the engine and the driveshaft are decoupled. Nevertheless, the optimization of the powertrain system of series HEV has not been specifically addressed. We conduct an optimization of the generation system of a series HEV based on the series HEV bus. The main objectives are to simulate the system and to compare the fuel economies of conventional and optimized generation systems.
KSCE Journal of Civil and Environmental Engineering Research
/
v.31
no.6A
/
pp.425-433
/
2011
In this study, in order to investigate the wave-induced buoyancy effects, experimental studies were conducted on pontoon-type floating structures. A series of small-scale tests with various wave cases were performed on the pontoon models. A total of four small-scale pontoon models with different lateral shapes and bottom details were fabricated and tested under the five different wave cases. Six hydraulic pressure gauges were attached to the bottom surfaces of the pontoon models and the wave-induced hydraulic pressure was measured during the tests. Finally, hydraulic pressures subjected to the bottoms of the pontoon models were compared with each other. As the results of this study, it was found that whereas the waffled bottom shape hardly influenced the wave-induced hydraulic pressure, the hybrid lateral shape significantly influenced the wave-induced hydraulic pressure subjected on the bottoms of floating structures. The air gap effects of the hybrid shape contribute to decreasing the wave-induced hydraulic pressure due to absorption of wave impact energy. Compared with box type, the hydraulic pressures of the hybrid type were about 83% at the bow, 74% at the middle, and 53% at the stern.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.38-38
/
2004
본 연구에서는 미세 물체를 조작하기 위해 젓가락 구조론 가진 3 텅스텐 젓가락형 그립퍼(이후 텅스텐 그립퍼로 명명)와 2 하이브리드 젓가락형 그립퍼(이후 하이브리드형 그립퍼로 명명)를 설계하고 제작하여 장단점을 비교 분석한다. 두 가지 그립퍼의 미세 핑거(Micro fingers)들은 모두 압전 다중 벤더(Piezoelectric Multilayer bender)와 스택(Stack) 구동기로 구동되었다. 그 중 압전 다중벤더는 물체를 잡을 때 굽힘(Bending) 운동을 만들고 스택은 팁간의 끝점이 일치하지 않을 매 일치되도록 잡는 방향과 수직한 방향으로 구동된다.(중략)
Mok, Dong Youb;Kim, In-Soo;Kim, Dong Ho;Kim, Gu Ni
Elastomers and Composites
/
v.47
no.4
/
pp.318-328
/
2012
In this study, the one-component curable polyurethane resin was manufactured using blocked isocyanate and hybrid technology. To prepare the one-component curable hybrid polyurethane, silica hybrids including hydroxyl group was synthesized, and the size, shape and distribution of hybrid particle in polyurethane resin were confirmed. Then the dissociation property, mechanical property and molding property of blocked isocyanate were investigated. The dissociation property of blocked isocyanate in one-component curable polyurethane became better as the heating temperature and treatment time increased. The synthesized silica hybrid had spherical appearance and size of 23~27 nm in diameter, and it was observed that the hybrid particles were homogeneously distributed in polyurethane structure. In the case of hybrid polyurethane, the mechanical property, anti-abrasion and thermal property were higher than those of general polyurethane, and it was observed that the mechanical property was maintained when the plasticizer was introduced.
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.595-595
/
2013
본 연구에서는 brush painting공법을 이용하여 인쇄형 유기태양전지에 적용이 가능한 ITO nanoparticle/Ag nanowire/ITO nanoparticle (Nano IAI) 다층 하이브리드 투명 전극의 전기적, 광학적, 구조적 특성을 연구하였다. 평균 25 nm 사이즈의 ITO 나노 입자로 구성된 ITO 나노 잉크와 직경 20~25 nm의 Ag nanowire 잉크를 기반으로 Brush painting 기술을 적용해 상온, 상압에서 낮은 면저항과 높은 투과도를 가지는 Nano IAI 하이브리드 투명 전극을 제작하였다. Nano IAI 투명 전극 제작 시 일정한 두께에서 Ag nanowire 코팅을 위한 brush painting 횟수를 변수로 하여 최적화 공정을 진행하였으며, Ag nanowire가 2번 brush painting 된 Nano IAI 다층 하이브리드 투명전극은 $3.4{\times}10^{-3}$ ohm-cm의 비저항과 52.33 ohm/square의 낮은 면저항을 나타내었다. 이를 통해 효과적으로Ag nanowire를 ITO nanoparticle 사이에 삽입할 경우, 고온의 열처리 공정을 통하지 않고 낮은 면저항을 가지는 인쇄형 투명 전극을 구현할 수 있음을 확인할 수 있었다. 특히 Nano IAI 다층 하이브리드 전극은 83.83%의 높은 투과도를 나타내는데 이는 삽입된 Ag Nanowire의 폭과 길이가 나노 사이즈이기 때문에 입사되는 빛이 흡수되기보다 대부분 투과하기 때문으로 사료된다. 또한, XRD 분석과 HRTEM 분석을 통해 Nano IAI 다층 하이브리드 투명전극의 전도 메커니즘을 설명하였다. 이와 같은 우수한 전기적, 광학적 특성은 brush painting 기법으로 제작된 Nano IAI 다층 하이브리드 투명 전극의 인쇄형 유기태양전지 적용 가능성을 나타낸다.
전류 동기 검출법은 3상이 불평형된 전원 시스템하에서도 전원전류를 평형된 정현파로 보상해 줄뿐 만 아니라 순시전력이론에 비해서 단상에도 적용 가능한 이론이다. 그러나 종전의 전류 동기 검출법은 능동전력필터가 고조파 성분과 기본파 무효성분을 독립 제어하는 하이브리드형 능동전력필터 시스템에는 적용할 수 없다. 따라서 본 연구에서는 불평형 전원 시스템하에서도 비선형 부하전류를 유효성분 기본파 무효성분 그리고 왜형성분으로 분해하여 제어 가능한 확장된 전류 동기 검출법을 제시하였다. 본 연구에서 제시한 방법의 타당성을 입증하기 위해, 불평형 교류 전원하에서 평균전력이론 동기 전류 검출법 그리고 제안된 방법을 실험에 의하여 비교 검토하였다.
본 연구에서는 독립형 직류 배전망 구성에 이용될 수 있는 태양광 발전 시스템 및 ESS(Energy Storage System)를 이용한 하이브리드형 분산 전원 시스템의 구성 일례를 제시한다. 제안된 시스템의 전력회로는 태양광 발전 시스템용 PCS에는 직렬 공진 탱크를 가지는 절연형 풀브리지 방식, ESS용 PCS에는 비절연형 양방향 컨버터로 구성되었다. 태양광 PCS의 제어방식으로는 전류 제어기가 사용되었으며, ESS 용 PCS에는 비집중식 제어방식이 적용 되었다. 제안된 방식의 타당성을 검증하기 위해 100[kW]급 태양광 시스템, 100[kW]급 ESS를 기반으로 하이브리드 시스템을 구현하고 직류 계통 전압 제어 특성, 부하급변에 대한 전력분담 제어 실험결과를 제시하였다.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2009.10a
/
pp.444-446
/
2009
현재 대다수의 맥박(또는 심박) 측정 장치는 electrodes와 PPG로 국한되어 있다. 그러나 electrodes는 착용자의 불편감과 수입 의존성에 의한 높은 가격이라는 단점을 가지고 있으며, PPG는 동잡음에 약하다는 단점을 갖는다. 본 논문에서는 PPG와 flexible sensor를 동시 적용하여 상호 작용하게 함으로서 각 센서들의 단점을 보완 해줄 수 있는 하이브리드형의 맥박 측정 장치에 대하여 연구하였다.
구면무단변속기(SS-CVT)는 구조가 간단하여 변속기구의 부피와 무게를 기존의 변속기구에 비하여 줄일 수 있으며, 별도의 클러치 없이 출력축의 정회전, 역회전 그리고 중립상태 등을 구현할 수 있다. 본 연구에서는 이러한 구면무단변속기의 기구적 특징과 변속메카니즘을 이용하여 직류모터와 가솔린엔진을 장착한 병렬형 하이브리드차량의 동력전달계를 제안하고자 한다. 이를 위하여 먼저 구면무단변속기의 작동원리에 대해 설명하고 전용 실험장치를 제작하여 무단변속성능을 검증하였다. 또한 직류모터를 보조 동력원으로 사용하는 병렬형 하이브리드차량 동력전달계의 설계를 위해 연결기어비와 구면무단변속기의 변속비를 차량주행성능에 맞추어 설정하였으며, 이를 차량가속성능의 수치 시뮬레이션을 통하여 분석하였다. 시뮬레이션 결과를 바탕으로 구면무단변속기의 하이브리드차량 동력전달계의 적용가능성을 검증하였으며, 연구결과로 선정된 구성요소의 설계파라미터를 이용하여 시작차량을 제작하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.