• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.659-664
• /
• 2000

Fuel-consumption and catalyst-out emissions of a parallel hybrid electric vehicle are affected by operating region of an engine. In many researches, It is generally known that it is profitable in fuel- consumption to operate engine in OOL(Optimal Operating Line). We established the mathematical model of a parallel hybrid electric vehicle, which is linear time-invariant. To operate an engine in OOL, we applied RHC(Receding Horizon Control) to the driving control of a parallel hybrid electric vehicle. And it is known that the RHC has advantages such as good tracking performance under state and control constraints. This RHC is obtained by using linear matrix inequality (LMI) optimization. In this paper, there are three main topics. First, without state and control constraints, the optimal tracking of OOL was simulated. Second, with state and control constraints by engine and motor performances, the optimal tracking of OOL was simulated. In the last, we studied on the optimal gear ratio. That is to say, we combined the RHC and the iterative simulation to extract the optimal gear ratio. In this simulation, the vehicle is commanded to track the reference vehicle trajectory and the engine is operated in the optimal operating region which is made by the state constraints.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.112-121
• /
• 2015

In this paper, powertrain of output split type plug-in hybrid electric vehicle is analyzed for the operation range of speed, torque, and power. First, it is assumed that the efficiency of motor is 100%. And, the speed and torque equations are derived based on the lever analogy. With the above equations, the simulations are performed for the powertrain of output split type plug-in hybrid electric vehicle. From the simulation results, it is found that the output torques of EV1 and series modes are larger than the EV2 and power split modes' ones. It means the EV1 and series modes can be used for the rapid acceleration. But the EV1 and series modes can be used only the velocity of under the 120 km/h. It is because the motor reaches its maximum speed when the velocity is over the 120 km/h for the EV1 and series modes. When the engine is turned on, the engine power is transmitted through the two motors. But, the power split mode shows the power split of engine at the output shaft, and it has the point of zero motor power. Thus, the transmission efficiency of the power split mode can be higher than the series mode's one, it the motor efficiency is considered.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.566-578
• /
• 2017

For optimizing the operation plan when strike packages attack multiple targets, this article suggests a new mathematical model and a parallel hybrid genetic algorithm (PHGA) as a solution methodology. In the model, a package can assault multiple targets on a sortie and permitted the use of mixed munitions for a target. Furthermore, because the survival probability of a package depends on a flight route, it is formulated as a mixed integer programming which is synthesized the models for vehicle routing and weapon-target assignment. The hybrid strategy of the solution method (PHGA) is also implemented by the separation of functions of a GA and an exact solution method using ILOG CPLEX. The GA searches the flight routes of packages, and CPLEX assigns the munitions of a package to the targets on its way. The parallelism enhances the likelihood seeking the optimal solution via the collaboration among the HGAs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1075-1076
• /
• 2007

The HEV (Hybrid Electrical Vehicle) becomes commercialized recently because of high fuel efficiency and low air pollution. The highest output power system except the traction motor is an air conditioner compressor in HEV system. The full or hybrid electric compressor is applied for HEV. The general HEC (Hybrid Electric Compressor) requires the half power motor and drive system of the full electric compressor because the rated output power of motor drive system is designed to charge the minimum cooling capacity at the time of idle stop. Therefore, this hybrid electric is more economical and practical solution. In this paper, we studied about the motor drive system of hybrid electric compressor for HEV. The applied voltage specification is 42 V, an IPMSM (Interior Permanent Magnet Synchronous Motor) is designed and applied as the compressor drive motor.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.191-197
• /
• 2023

LPG direct injection (LPDi) technology is a method of improving the weaknesses of existing LPG vehicles by directly injection into the combustion chamber. This study was conducted on the comparison of emissions and fuel efficiency performance of the engine and vehicle by applying LPDi technology. The LPDi hybrid engine's maximum output and maximum torque were measured at an equivalent level of less than 1% compared to conventional gasoline fuel. The fuel amount was corrected using the LCU controller, and the THC, CO, and NOx emissions were reduced to 90% in the operating range of the three-way catalyst through air-fuel ratio control. The analysis of THC+NOx and CO emissions in FTP-75 (CVS-75) driving mode satisfied the US LEV III SULEV30 regulation.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.73-82
• /
• 2011

Most of countries start to restrict the emission gases of vehicles especially CO2 because of the global warming. Many vehicle companies including Toyota have launched various HEVs to satisfy the restriction laws and to improve the vehicle's efficiency. However, development for heavy-duty hybrid system is not plentiful rather than the passenger car. In this study, we choose the optimal size of engine, motor and battery for heavy-duty hybrid systems using dynamic programming. Also we analyze the correlation of the system's cost and efficiency because the added cost of vehicle to make the hybrid system is very important factor for the manufacturing companies. Finally, this study suggests a method to choose the appropriate system components size considering its performance and the cost. With this method, it is possible to select the component size for various systems.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.521-526
• /
• 2020

본 논문은 상용차의 자율 군집주행 플랫폼을 평가함에 있어 차량 환경용 C-ITS 통신프로토콜인 WAVE 통신 및 LTE-V2X 통신과 상용 이동통신인 Legacy LTE 통신을 결합한 하이브리드 V2X 통신 플랫폼의 설계 방안을 제안하고 설계과정을 제시한다. 안전하고 효율적인 자율 군집주행 플랫폼을 위해 C-ITS 통신 기반의 저 지연 통신기능이 요구되며 또한 이를 관제하기 위해서 상시 연결이 가능한 Legacy LTE 등의 상용 통신기능이 요구된다. 이러한 시스템을 평가하기 위해서 평가 장비는 동일 수준 이상의 통신성능을 가져야 한다. 본 논문에서 제시되는 주요 설계 내용은 기능 평가를 위한 하이브리드 V2X 단말기 구현에 적용될 예정이다.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1335-1343
• /
• 2012

논문은 위상최적화와 치수최적화 해석기법을 이용한 샌드위치 복합재와 알루미늄 압출재로 구성되는 하이브리드 철도차량 차체 구조물의 경량 모듈화 설계에 관한 연구이다. 위상최적설계는 초기설계단계에 차체 구조물의 최적의 재료적용부위를 선정하기 위해 사용되었으며, 치수최적화설계는 하이브리드 차체 구조물의 최적 설계 변수를 찾기 위해 사용되었다. 이때, 최적화해석은 일계법과 부분문제근사법을 사용하였다. 위상최적설계해석을 통해 차체 구조물의 강성 및 제작성을 향상시키기 위한 언더프레임, 로우 사이드 패널 모듈에 1차 부재인 알루미늄 압출재의 적용이 적절하고, 샌드위치 복합재는 무게를 최소화하기 위한 2차 부재로서 루프 및 미들 사이드 패널 모듈에 적용이 적합하다는 결론을 얻었다. 또한, 알루미늄 압출재와 샌드위치 복합재로 구성되는 하이브리드 차체 구조물의 무게는 샌드위치 복합재로만 만들어진 차체 구조물과 비교하여 최대 17.7%까지의 경량화 효과를 얻을 수 있음을 확인하였다.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.11-18
• /
• 2013

시멘트 콘크리트 포장은 중차량에 대한 뛰어난 적용성과 장기간의 공용성을 지녔고, 아스팔트보다 구입이 용이하여 내구성 및 경제적 측면에서 우수한 장점을 가지고 있으나, 아스팔트 포장에 비해 노후화 되거나 파손이 발생할 경우 대규모 유지보수가 발생할 수 있는 단점이 있다. 콘크리트 포장의 손상은 대부분 균열에 의한 것으로 콘크리트 포장의 초기 및 장기균열을 제어할 수 있는 기술 확보가 필요하다. 이 연구에서는 일반적인 구조용 콘크리트 배합에 비해 단위수량이 낮고 굵은 골재 최대 치수가 큰 콘크리트 포장 배합에서의 섬유보강 효과를 평가하기 위해 직경이 작고 형상비가 큰 마이크로 섬유와 직경이 크고 형상비가 작은 매크로 섬유로 하이브리드 보강된 콘크리트 포장용 배합에 대한 기본적인 성능실험을 수행하였다. 실험 결과 콘크리트 포장 배합의 섬유보강 효과는 일반 구조용 콘크리트 배합에 비해 낮은 것으로 나타났으나 하이브리드 섬유로 보강된 콘크리트 포장 배합은 휨강도 및 인성보강 효과가 큰 것으로 나타났다. 특히 하이브리드 섬유보강 콘크리트는 포장 손상의 주요 요인인 콘크리트 포장의 초기 건조수축을 제어하는데 매우 효과적인 것으로 나타났다.