• Journal of the Korea Computer Graphics Society
• /
• v.21 no.5
• /
• pp.37-44
• /
• 2015

This paper presents a novel 3D model representation, called hybrid model representation, to overcome existing 3D volume-based indoor scene reconstruction mechanism. In indoor 3D scene reconstruction, volume-based model representation can reconstruct detailed 3D model for the narrow scene. However it cannot reconstruct large-scale indoor scene due to its memory consumption. This paper presents a memory efficient plane-hash model representation to enlarge the scalability of the indoor scene reconstruction. Also, the proposed method uses plane-hash model representation to reconstruct large, structural planar objects, and at the same time it uses volume-based model representation to recover small detailed region. Proposed method can be implemented in GPU to accelerate the computation and reconstruct the indoor scene in real-time.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.49-54
• /
• 2016

The large scaled lead-acid battery is widely used for efficient operation of the photovoltaic system in many islands. However, lithium-ion battery is now being introduced to mitigate the fluctuation of wind power and to replace lead-acid battery. Therefore, hybrid ESS (Energy Storage system) that combines lithium-ion battery with lead-acid battery is being required because lithium-ion battery is costly in present stage. Under this circumstance, this paper presents the optimal algorithm to create composition rate of hybrid ESS by considering fixed and variable costs in order to maximize advantage of each battery. With minimization of total cost including fixed and variable costs, the optimal composition rate can be calculated based on the various scenarios such as load variation, life cycle and cost trend. From simulation results, it is confirmed that the proposed algorithms are an effective tool to produce a optimal composition rate.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.55-64
• /
• 2002

Due to the friction characteristics of cylinders and the rail of a passenger car, in the system actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-crossing speed region. To overcome the drawbacks of a PID controlled hydraulic system, a zooming fuzzy logic controller is designed and finally an improved hybrid controller is Proposed. The proposed controller is composed of the PID controller and the zooming fuzzy controller. The effectiveness of the proposed control scheme is shown by simulation and experimental results, In which the proposed hybrid control method yields good control performance not only in the zero-crossing speed region but also In the overall control region including steady-state region.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.11
• /
• pp.592-600
• /
• 2001

To improve the performance of wide-issue Superscalar microprocessors, it is essential to increase the width of instruction fetch and issue rate. Data dependences are major hurdle to exploit ILP(Instruction-Level Parallelism) efficiently, so several related works have suggested that the limits imposed by data dependences can be overcome to some extent with the use of the data value prediction. But the suggested mechanisms may access the same value prediction table entry again before they have been updated with a real data value. They will cause incorrect value prediction by using stable data and incur misprediction penalty and lowering performance. In this paper, we propose a new hybrid value predictor which achieve high performance by reducing stale data. Because the proposed hybrid value predictor can update the prediction table speculatively, it efficiently reduces the number of mispredicted instruction due to stable due to stale data. For SPECint95 benchmark programs on the 16-issue superscalar processors, simulation results show that the average prediction accuracy increase from 59% for non-speculative update to 72% for speculative update.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2352-2360
• /
• 2007

Due to the friction characteristics of cylinders and the rail of a passenger car, in the elevator actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-costing speed region. To overcome the drawbacks of a PID controlled hydraulic elevator system, a zooming fuzzy logic controller is designed and finally an improved hybrid fuzzy controller is proposed. The effectiveness of the proposed control scheme are shown by simulation and experimental results, which the proposed fuzzy hybrid control method yields good control performance not only in the zero-crossing speed region but also in the overall control region including steady-state region.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.205-212
• /
• 2023

In the modern society, the extreme weather caused by climate change has brought about exceptional damage in succession over the world due to the use of fossil fuels, and infectious diseases such as COVID-19 worsen the quality of human life. It is urgently necessary to reduce green-house gas and use new renewable energy. The global environmental pollution should be decreased by reducing the use of fossil fuels and using new renewable energy. This paper suggests a system which can function for the environment of four seasons, safety and communication, through the photovoltaic power-based intelligent CCTV, internet and WiFi, and cooling and heating systems, and can optimally manage power, through the real-time monitoring of the production and the consumption of the photovoltaic power. It suggests a hybrid generation system supporting diesel generation without discontinuation in the case of emergency such as system power outage caused by cold waves, typhoons and natural disasters in which the photovoltaic power generating system cannot be used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.248-256
• /
• 2015

In this paper, a hybrid MIMO antenna for the metal phone with auxiliary slot for 4th generation mobile communication is designed and implemented. Auxiliary slot locates on the rear metal cover of the phone, and handles for LTE class 40 band. The auxiliary slot operates hybrid with a monopole antenna. Studied antenna satisfies under VSWR 3:1 for LTE class 13/ LTE class 14/ CDMA/ GSM/ DCS/ PCS/ W-CDMA/ LTE class 40 bands. ECC(Envelope Correlation Coefficient) value for MIMO characteristic is less than 0.2 over the whole design bands. Average gains and antenna efficiencies measured by MTG anechoic chamber were -5.57~-1.45 dBi and 27.75~71.6 %, respectively.

• Journal of the military operations research society of Korea
• /
• v.35 no.1
• /
• pp.1-19
• /
• 2009

This study aims to improve methodology for a Defense Simulation which is to calculate wartime stockpile requirement of artillery munitions for K-9 against armored vehicles. Due to incorrect data input and distortion in simulation logic, the expected occupancy ratio for each weapon system obtained from applying a traditional method using an analytical Defense Simulation shows considerable discrepancies from what we expect from a war in the future. This study analyzes causes for incorrect data input and phenomena of distortion in simulation logic. By taking measures to control these phenomena, the study aims to present trustworthy methodology for a Hybrid Defense Simulation which is to calculate wartime stockpile requirement of munitions for ground forces by interaction between a controlled training Defense Simulation model and a analytical Defense Simulation model

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.94-98
• /
• 2011

Poly(2-hydroxyethyl methacrylate), PHEMA, hybrid gels containing Pluronic and acrylic acid (AAc) were prepared as new biocompatible and stimuli-responsive hydrogels by photo-polymerization technique. The prepared hybrid gel showed reversible, temperature-responsive swelling behavior due to the presence of Pluronic component, which underwent sol-gel transition at an elevated temperature to cause gel shrinkage. The hydrogel also exhibited increased swelling degrees and pH-sensitivity due to the AAc component with ionizable carboxylic acid groups. The microporous gel morphology and its changes upon stimuli was observed by scanning electron microscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.163.1-163.1
• /
• 2013

플라즈마 시뮬레이션을 수행하기 전에 현 컴퓨터의 계산 능력범위 내에서 물리적으로 타당하게 설명할 수 있는 수치 해석 방법을 먼저 정한다. 예를 들면, 가스 반응이 많고 각 가스 반응 중에 중요가스 반응을 빠르고 선택적으로 선별하고자 할 때, 혹은 외부 입력 변화에 따른 플라즈마 종의 온도 또는 밀도를 대략적으로 파악하고자 할 때는 공간적인 분포를 고려하지 않는 0차원 global 모델링을 이용한다. 압력이 높고 충돌이 빈번한 경우에는 플라즈마를 유체적인 관점에서 기술이 가능하므로, 볼츠만 방정식에서 속도에 관한 0차, 1차, 2차 모멘텀을 이용하여 유도된 유체 방정식을 이용한다. 반대로 압력이 낮고 충돌이 거의 없는 경우에는 플라즈마 입자를 개별적으로 추적하는 입자 전산 모사 방법을 이용한다. 지금까지는 앞에서 언급한 예와 같이, 개별 플라즈마 상태에 맞는 시뮬레이션 코드를 각각 만들어야 했고, 각 코드를 개별적으로 유지 보수해야 했다. 하지만, 개별적으로 코드를 유지 보수를 해야 할 경우에는, 동일한 기능을 하는 함수를 반복적으로 각 코드에 입력해야 하는 불편함이 따르고, 각 수치해석 방법의 장점을 모은 하이브리드 방법과 같은 전사모사를 개발할 때 각 기능을 통합해야 하는 어려움이 따른다. 또한 지금까지 개발된 대부분의 플라즈마 코드는 외부 입력에 대해 유연하지 못한 대처로 새로운 가스 반응을 추가하거나 새로운 수치해석 방법을 추가할 경우에는 코드를 전체적으로 수정해야 하는 어려움이 있었다. 따라서 코드를 통합적으로 관리할 수 있고, 외부 입력에 대해 유연하게 대처할 수 있는 시뮬레이터가 필요했다. 여기에서는 객체 지향 언어인 C++ 언어를 이용하여, 사용자 입력에 대해 유연하게 대처할 수 있고, 복잡한 화학 반응을 특정 수치 해석 방법에 상관없이 통합적으로 관리할 수 있는 코드를 개발하였다.