• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1406-1415
• /
• 2012

Though WiMedia supports the higher data rates than other WPAN technologies, a WiMedia device cannot reach other devices which are apart from it more than 10 meter; the limited transmission range of the WiMedia protocol. In this paper, we propose a multi-hop QoS routing protocol to enable WiMedia devices to transmit real-time data to devices that is located out of transmission range. The proposed routing protocol is a hybrid routing protocol, which is the mixed protocol of table-driven and on-demand routing algorithm. In the proposed protocol, a route for a device within 2-hop is established by using the table-driven routing algorithm and a route for the device beyond 2-hop is established by using the on-demand routing algorithm. We perform ns-2 simulation to investigate the performance of the proposed routing protocol with AODV and DSDV. The simulation results show that the proposed protocol's performance is better than AODV and DSDV in terms of the throughput and delay.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.617-621
• /
• 2012

PHEAs [${\alpha}$,${\beta}$-poly(2-hydroxyethyl-DL-aspartamides)], a class of poly(amino acid), have been widely studied as biodegradable and biocompatible polymers for potential biomedical and pharmaceutical applications. In this study, we investigated a homogeneous blend of PHEA with poly(N-vinyl pyrrolidone) (PNVP) and its semi-IPN (semi-interpenetrating polymer network) gels. Blend films were prepared by a solution casting method. The resulting blends were totally transparent over the whole composition ranges and the single $T_g$, changing monotonously with composition, was observed by DSC to confirm the miscibility between these two polymers. FTIR was used to discuss the possible hydrogen-bonding interaction between polymers. In addition, semi-IPN type gels were prepared by chemical crosslinking of PHEA/PNVP blend solution using hexamethylene diisocyanate (HMDI) as a crosslinking reagent. The prepared gel was characterized by their swelling property and morphology.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.35-42
• /
• 2020

Digital transformation is about revolutionizing the interaction between virtual and reality. The complex problems that arise in this process must be solved, and one of the methods is computing thinking. Therefore, this study aims to observe whether software education that uses unplugged as liberal education is effective in enhancing computing thinking. For this, 5 elements of computing thinking were extracted and unplugged was applied to liberal software classes, and classes were conducted. During one semester, 16 sessions of classes were conducted and computing thinking enhancement was measured through surveys. As a result, the computing thinking of the students increased overall after classes. Observation surveys showed that, among computing thinking elements, students of all academic fields felt difficulties conceptualizing abstraction elements, those of arts and physical education felt more difficulties with algorithm elements, and those of the humanities felt more difficulties with pattern recognition elements. In the future, various contents for each element should be developed by academic field to aid learner understanding.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.417-422
• /
• 2009

국내에는 충주 어래산 광화대와 홍천 광화대에 대한 탐사 결과 약 4,600,000 톤의 자원량을 확보하였으나 시추량의 제한에 따른 자원량의 부족과 낮은 가격으로 인해 경제성이 없는 것으로 잠정적으로 판단된 바 있다. 그러나 최근 희토류 가격이 2000년대 초에 비해 2~3배까지 상승하였으며 최저개발 품위가 REO 2%대로 낮아짐으로써 두 광화대에 대한 체계적인 정밀탐사를 통하여 보다 정확한 자원평가가 요구된다. 이 두 지역은 REE 뿐만 아니라 Fe, Sr 등이 수반됨으로써 그 잠재적인 가치를 높일 수 있을 것으로 판단된다. 하동 광화대는 Ti외 REE와 Li의 추출이 가능하여 경제성을 상승시킬 수 있을 것으로 판단된다. 양양 광화대는 Zr-Nb-REE 광화대로 알려져 있으나 체계적 탐사가 수행되지 않아 자원량의 산정은 수행되지 않았으나 REE 외 희유금속인 Nb을 수반하여 그 잠재적인 가치가 높다고 판단된다. 국내 REE 자원탐사는 체계적이고 계획적인 탐사가 진행 된 적이 없어 단일 광상에 대해 정확한 매장량 산정이나 경제성 분석 등이 이루어지지 않아 그 가치 판단이 모호함으로써 개발에 제한을 가지고 있다. 세계적인 수요량이 현재 REO 100,000톤에서 2013년에는 거의 200,000톤으로의 증가가 전망되고, Eu의 가격은 2000년 중반에 비해 최근 2배 상승하였으며, Dy의 가격은 3배 이상 급상승 추세에 있어 대부분 희토류 산화물 가격은 점차 증가될 것으로 전망한다. 전 세계 희토류 생산의 95%를 중국이 독점하고 있어 자원이 1개국에 편재된 극히 좋지 않은 자원환경으로 세계 각국에서 희토류 탐사에 전념하고 있는 실정이다. 아울러 하이브리드 카 생산이 증대되면 중국만이 생산하는 중희토류의 수요가 급증하여 가격 상승과 함께 수급에 차질이 있을 것으로 추측된다. 따라서 국내 희토류 자원에 대한 체계적이고 단계적인 중장기적 탐사를 통하여 REE 자원을 확보하여 개발한다면 국내 REE 자원의 수급을 원활히 할 수 있을 것으로 기대된다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.71-81
• /
• 2014

It is an important issue to evaluate the effectiveness of chemical warfare through modeling and simulation(M&S) technology. In this paper, we propose the M&S methodology and environment for the chemical warfare for effectiveness analysis. In detail, for modeling perspective, we propose three fundamental component models according to their behaviors, which are a chemical weapon, a detecting device system, and an engaging unit system. Among proposed models, the chemical weapon and the detecting device system models are represented by engineering-level system models, whereas the engaging unit system model are described as an engagement-level system model. For simulation perspective, we apply a hybrid simulation environment using High Level Architecture (HLA) to interoperate with the proposed engineering and engagement-level models. The proposed M&S methodology and environment enables to evaluate the effectiveness of the chemical warfare system considering the doctrines, the performance of device or weapon, and weather factors. To verify the efficiency of the proposed methodology and environment, we experimented three categorized case studies, which are related with those considering factors.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.658-663
• /
• 2011

The SNCR-SCR (selective non-catalytic reduction-selective catalytic reduction) hybrid system is an economical NOx removal system. In this study, the effect of the operating parameters of the SNCR-SCR hybrid system on NOx removal efficiency was investigated. When the SNCR reactor was operated at a temperature lower than the optimum temperature ($900{\sim}950^{\circ}C$), an additional NO removal is obtained basesd on the utilization of $NH_3$ slip. On the other hand, the SNCR reactor operated above the temperature resulted in no additional NO removal of SCR due to decomposition of $NH_3$. Therefore, the SNCR process should be operated at optimum temperature to obtain high NO removal efficiency and low $NH_3$ slip. Thus, it is important to adjust NSR (normalized stoichiometric ratio) so that $SR_{RES}$ can be maintained at an appropriate level.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.413-420
• /
• 2020

In this study, a new lab-scale test equipment was developed to evaluate the variation of concrete workability after pumping. The equipment was designed to simulate the pressure and shearing applied to concrete during actual pumping. In order to examine the feasibility of evaluating variation of concrete workability through lab-scale test equipment, real-scale pumping tests and lab-scale tests were performed together. The design strength of concrete used in the both tests was 24, 35, and 60MPa, and the length of pipe used in pumping tests was 130, 304, and 518m. The lab-scale tests were performed in consideration of actual pumping conditions(pressure, shearing, and pumping duration time). The workability(slump or slum flow) of concrete was measured before test, after the pumping test, and after lab-scale test. In all tests, workability of all concrete mixtures decreased. In addition, the results of both tests were measured greatly similarly.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.162-173
• /
• 2022

The development of new materials is an essential key for unraveling the environmental and energy problems all over the world. Among the various application materials in this area, crystalline and two-dimensional carbon materials have been studied from points of view such as electrical conductivity, chemical stability, and surface engineering due to the assembly of honeycomb and sp/sp² hybridization structure. Novel two-dimensional materials, including graphene and graphyne, have been continuously reported for several decades to develop in renewable energy fields. Also, various pristine/engineered two-dimensional carbon allotropes have been researched to combine metal nanoparticles in the form of a sphere, cubic, and so on. The renewable energy performance to apply for these materials is drastically increased. In this review, we introduce the research points of the 2D carbon allotrope materials, graphene and graphyne, and applications to improve the performance of renewable energy applications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.483-494
• /
• 2023

This report presents two cases concerning strategies for improving denture retention in pediatric patients with oligodontia caused by hypohidrotic ectodermal dysplasia (HED). Both patients presented with multiple missing teeth, conical canines, alveolar bone atrophy, and a skeletal Class III tendency. In the first case, a modified form of conical-crown-retained denture was used to cover the canines. This approach was carried out without tooth extraction or coping. In the second case of severe alveolar bone resorption and a distally tilted lower left canine, the tooth was restored with a hybrid ceramic crown. It was subsequently converted into a clasp-retained removable partial denture, utilizing a suction mechanism. Both patients are currently receiving regular check-ups for the maintenance of their prosthetic appliances and the evaluation of their growth patterns. This study presents innovative prosthetic treatment methods for pediatric patients with HED who have inadequate denture retention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.131-139
• /
• 2024

In a edentulous patient, various methods can be employed for prosthetic treatment using implants, such as implant-supported fixed prostheses, overdentures, hybrid prostheses, and implant assisted removable partial denture. In this case, in a patient with moderate to severe chronic periodontitis requiring full arch extractions, implants were strategically placed using computer-guided surgery. In the maxilla, due to inadequate bone quality and quantity leading to insufficient initial stability, delayed loading was implemented, and interim prosthesis was used during the osseointegration period. In the mandible, stable initial stability was achieved, allowing for immediate loading to reduce patient discomfort. Primary stability is considered the most crucial factor for obtaining immediate loading, so a thorough clinical and radiological evaluation of the remaining alveolar bone quantity and quality must be conducted before surgery.