• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.79-86
• /
• 2010

This study was performed to evaluate the flexural behavior of Hybrid fiber sheet (HFC) and Hybrid fiber bar (HFB) strengthened reinforced concrete (RC) beams. According to test results, Hybrid fiber reinforcement strengthened RC beams showed approximately 60 to 200% higher reinforcing effects than that of un-reinforced specimens. In addition, the reinforced beams showed the ideal failure pattern, which is failed presenting the ductile behavior after yielding of the reinforcing bar. More specifically, in the case of HFB reinforced RC beams, the difference with puttying method was not apparent since HFB beams reinforced using the injection of epoxy and bonding of putty showed the similar failure patterns.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.453-456
• /
• 2008

Fiber composite is high anticorrosive, high strength and low weight ratio of strength(1/4 of reinforcing bar) so that strengthens concrete structures without increase of additional weight. But fiber composite has a brittle character which increases to the maximum stress point lineally and is suddenly destroyed. Hybrid fiber composite is developed to overcome weakness of fiber composite. The hybrid fiber composite is manufactured by bar type and consists of 9:1 volume ratio(glass : carbon). In this study the result indicates that it is purposed to find out reinforcing characteristics of hybrid fiber composite fixed with impact anchor.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.151-162
• /
• 2016

This study developed the shape of low depth new shape high performance hybrid composite beam which is taken strengths and compensated the defect of composite beam and hybrid beam. Also, this study performed the monotonic test to evaluate the bending performance of Low depth shape by creating 12 bending specimens. Bending performance test result showed that capacity of the beam was increased stably. Also, it is possible to apply the existing evaluation equation(KBC 2009) of composite beam. Mechanical properties and structural performance of materials are considered when high-strength steel ($F_y=650MPa$) is applied to the bottom plate.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.2
• /
• pp.135-145
• /
• 2017

This study is a secondary study that is a cyclic seismic test of High depth hybrid composite beam and column connection after the primary bending strength test of a high depth Hybrid composite beam. Total of 3 seismic test specimens were prepared to cyclic test. The bracket and beam web spliced by high strength bolt and the bracket and beam upper flange was spliced by welding. Test results showed that the seismic strength was higher than the plastic moment($M_p$) in the positive negative moment section, the requirement of composite intermediate moment frame wes satisfied. Therefore, the requirement of intermediate moment frame can be secured by applying the details of connection of this study results.

• Journal of the Korea Concrete Institute
• /
• v.28 no.1
• /
• pp.13-21
• /
• 2016

A hybrid precast concrete beam system with a simple rigid connection was proposed to compensate the limitations and shortcomings of the conventional bolt connection associated with the H-beams embedded into concrete beams. Three beam specimens with fixed both ends were tested under one-point top cyclic loading to explore the effectiveness of the developed hybrid beam system in transferring externally applied flexure to a column. The main parameter considered was the length ($L_s$) of H-beam, which was selected to be $0.25L_I$, $0.5L_I$, and $1.0L_I$, where $L_I$ is the distance from the support to the point of inflection. All beam specimens showed a better displacement ductility ratio than the reinforced concrete beams with the same longitudinal reinforcement index, indicating that the cyclic load-deflection curve and ductility were insignificantly affected by $L_s$. The continuous strain distribution along the beam length and the prediction of the ultimate load based on the collapse mechanism ascertained the structural adequacy of the developed rigid connection.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.403-414
• /
• 2016

Recently according to the decreasing of steel price and increasing of labor cost the various studies of steel structure and composite structure are proceeding. This study developed the new shape of high depth hybid forming composite beam and performed the bending test to evaluate the bending performance by creating 10 specimens. Bending test result showed that capacity of the beam was increased stably. The ratio of the nominal load to the maximum load($P_u/P_n$) is 1.19 and the deformation capacity(${\delta}_{0.8P_u}/{\delta}_y$) is 3.9~4.5. Also, it is possible to apply the existing evaluation equation(KBC 2009) of composite beam.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.501-501
• /
• 2016

하천은 크게 이수와 치수 및 환경 등의 주요 기능을 가지고 있다. 이수는 하천과 물이 주는 가치를 말하며, 치수는 기능이라기보다는 엄밀한 의미에서 하천관리를 통한 자연재해 방지를 의미한다. 이러한 이 치수 기능의 확보와 수변환경 조성을 위해 친환경적 수리구조물인 가동보의 설치가 증가 하고 있다. 가동보는 하천에 주로 설치되는 수리구조물 중의 하나로 국내에서는 2000년대부터 고정보를 대신하여 설치가 시작 되었으며, 최근 친환경적 하천정비 및 다양한 목적 등으로 국내 하천에 약 1,200여개의 가동보가 설치 및 운영되고 있다. 국내에 적용되고 있는 가동보 중 개량형 가동보의 제작 및 시공기술은 해외의 원천기술을 도입한 것으로 자재 수급 및 유지보수가 용이하지 못할 뿐만 아니라, 국내 여건에 맞지 않아 많은 문제점을 가지고 있다. 이에, 본 연구에서는 수자원 확보 및 수변 공간 조성 등을 위해 1) 기존 스틸소재의 개량형 가동보를 하이브리드(GFRP+스틸)소재로 개발하고, 2) 상류에 유하되는 이물질을 수위 저하 없이 하류로 배출하기 위해 각 경간의 개별 작동시스템을 개발하며, 3) 효율적인 하천 관리를 위하여 가동보 상단으로 월류 되는 하천 유량을 계측하기 위한 실시간 유량측정 시스템 개발 등으로 첨단 하이브리드 가동보를 개발하였다. 개발결과 기존 개량형 가동보의 단점인 부식해결로 인해 내구성을 확보하였으며, 경간별 개별 작동시스템 적용으로 하천 수위 조절이 가능하였다. 또한 실시간 유량 계측 시스템 적용으로 실시간 하천유량 계측이 가능해 개발된 기술을 국내 가동보에 적용한다면 원활한 하천 수위 관리 및 실시간 유량 측정이 가능하여 안전한 하천관리가 가능할 것으로 판단된다.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.37-48
• /
• 2018

Cyclic loading tests for shear dominant hybrid steel link beams with circular web openings were performed to evaluate the seismic performance. Four half-scaled specimens with bolted connections were tested. The test parameter is a diameter of the web opening, i.e., shear strength ratio ($V_{pw}/V_p$) of the link beam and presence of top-seat angles. Using test results, adequate design shear strength of link beam was finally suggested. Test results showed that when the shear capacity is less than half of the plastic shear strength, seismic performance was improved due to mitigation of pinching under reversed cyclic inelastic deformations.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.379-388
• /
• 2013

This paper aims to experimentally investigate the fire resistance of U-shaped hybrid composite beams protected by spay and paint insulations. Subjected to two and three hours of the Standard ISO fire, the flexural performance of 4.4m beams with/without imposed loadings was examined with respect to failure criteria such as deflection and deflection rate of the mid-span and temperatures measured in the steel section. The results demonstrated that the proposed configuration of the composite beam is able to achieve a very competitive 3-hour fire resistance rating in economical aspects.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.557-567
• /
• 2007

In underground parking lots of apartment housing, the story height is increased by $300{\sim}400mm$ because of various ducts for HVAC. In order to reduce this story height, this study proposed the 'hybrid beam', which is composed of PC beam with embedded steel beam and insitu concrete. The depth of the hybrid beam is reduced by 300 mm and then the steel beam is embedded over the length of reduced depth to compensate for the loss of strength. Then, we performed the large-scale structural tests on 9 specimens and investigated the flexural behavior of the specimens. The parameters of tests were the shape of steel beam section, the length of the reduced depth, the stage of construction, the effects of slab and shear connectors. The test results showed that the specimens, after the insitu concrete has cured, has the flexural capacity which exceeds the required design capacity regardless of other parameters. On the other hand, the specimens of construction stage do not have sufficient strength. Based on these results, it is thought that the proposed hybrid beam with reduced depth is applicable to the underground parking lots of apartment housing as long as the support is placed at construction stage.