• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.246-249
• /
• 2005

음향 시스템에 있어서 하울링 현상은 음성 레벨을 제한함으로써 음성의 명료도를 저하시키는 주된 요인이다. 그리고 이를 해결하기 위한 방법으로 하울링 주파수 대역의 게인을 낮추어 음향신호의 피드백을 최소화 하는 것이 일반적이기 때문에 하울링 주파수를 찾아내는 것이 하울링 제어에 있어서 가장 핵심적인 요소가 된다. 그래서 본 논문에서는 하울링 주파수를 자동으로 검출할 수 있는 기법을 제시하였다. 이는 외부로부터 입력된 오디오신호가 하울링 신호 특성을 만족하는 정도를 ‘하울링 지수’라는 파라메터로 정의한 후 이를 기준으로 하울링 발생여부를 판단하고 하울링으로 판별된 신호의 최대 진폭을 갖는 주파수를 하울링 주파수로 출력하는 기법이다. 본 하울링 신호 자동 검출기법의 내용을 검증하기 위하여 하울링 자동 검출 프로그램을 제작하여 실험을 수행한 결과 전체 하울링 신호의 95% 이상을 검출할 수 있었다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.623-629
• /
• 1998

To provide sufficient sound to the hearing-impaired person(HIP) who have many difficulty in communication with others using general telephone, big amplification is needed. But big amplification can occur howling as a side effect. In this study we developed the new technique of big amplification without howling, manufactured and estimated the new hearing aid telephone. Telephone speech is divided to three frequency band, amplified respectively and fitted to HIP's hearing ability. The telephone speech frequency is monitored by counter in time domain. The counter transfers the sinusoidal sound to rectangular wave using comparator and counts the number of rectangular wave in a certain time period, that is frequency, to monitor the howling. Telephone have microphone and speaker, which are fitted in a rigid structure and frequency band of telephone sound is limited, so howling occurs in the limited frequency band. If the counter notices that howling conditions happen, microprocessor decreases quickly the gain of the related frequency band. The result of test of our new hearing aid telephone showed that we can amplifiy the sound as much as 40dB, which is meaningful level to many HIP, and make HIP increase their perception ability from 20% to 60.8% in 1 syllable test and from 28.9% to 78% in 2 syllable test.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.283-286
• /
• 2001

본 논문은 전기적으로 음장을 가변하여 청감적 인상에 변화를 주는 실험 결과를 기술하였다. 본 실험은 마이크로폰으로 무대의 음원을 수음하고 잔향기로 옆방향 반사음과 잔향음을 각각 생성하여 스피커로 출력하였다. 실험 결과 실내의 청감적 인상이 개선됨을 확인하였다. 또 음원 수음 시 발생하는 하울링, 실내 잔향과 다른 스피커의 음색, 잔향기에서 발생하는 음색 변조 둥 기술적 문제를 해결하였다.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.629-635
• /
• 2000

Wheel /rail interaction has been known as a major source of railway noise. In this paper, a low noise wheel structure is developed and its effect on noise reduction is investigated. The developed low noise wheel employees a rubber material inserted into a steel rim or mounted on the wheel surface. Since the low noise wheel has low stiffness and high damping ratio compared to a solid wheel, the measurement results show that it reduces the rolling and squeal noise. It turns out that the proposed wheel could reduce interior noise level by 4∼5dB(A) and vehicle vibration level by 7∼10 dB. Although the proposed structure seems to be promising in noise reduction of railway vehicles, the low noise wheel is to be verified in endurance and cost effect.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.203-208
• /
• 2000

The vibration of a mask degrades the color purity in CRT Therefore, a damping wire is put into contact with the mask to reduce the vibration in perfectly flat CRT. In this study, we analyzed the vibration of the mask contacting with the damping wire using FEM. First we calculated the natural frequencies and mode shapes of the mask by modal analysis, and compared them with the measured results to confirm our finite element model. The modal analysis of the wire was also performed to investigate resonance with the mask. Finally, the transient dynamic analysis of the mask contacting with the wire was performed. The vibration of the mask was measured to confirm our analysis, and the results are in good agreement with the analysis.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.18-25
• /
• 2018

In this paper, we present a low-power implementation of the multi-channel hearing aid system using a general-purpose DSP chip. The system includes an acoustic amplification algorithm based on Wide Dynamic Range Compression (WDRC), an adaptive howling canceller, and a single-channel noise reduction algorithm. To achieve a low-power implementation, each algorithm is re-constructed in forms of integer program, and the integer program is converted to the assembly program using BelaSigna(R) 250 instructions. Through experiments using the implementation system, the performance of each processing algorithm was confirmed in real-time. Also, the clock of the implementation system was measured, and it was confirmed that the entire signal processing blocks can be performed in real time at about 7.02MHz system clock.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.45-50
• /
• 2005

In digital hearing aid system, one of the main problems is acoustic feedback which is known as howling because of miniaturization md high-gain amplification. In this paper, we proposed a feedback cancellation algorithm for hearing aid using time delay and time-varying decorrelation filter. The proposed algorithm has a kind of adaptive filter structure, which is combined with time delay and time-varying decorrelation filter to improve feedback cancellation. An all pass filter was implemented as the time-varying decorrelation filter using low frequency modulator. From the result of computer simulation, it is verified that the proposed algorithm has good ability to cancel feedback.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.73-83
• /
• 2022

The purpose of this paper was to identify a method to improve received noise in a specific frequency band, caused by RF radiation signals during aircraft operation. The communication equipment of the aircraft is critical to the performance and safety of the flight mission, as it is responsible for the function of internal and external communications. Noise-free, clean communication quality, as well as transmission and receiving functions have to be implemented. Thus, the cause analysis of the reception noise in a specific frequency band, was analyzed through trouble shooting. The receiving noise due to the RF radiation signal emitted from the subsystem unit inside the aircraft, was improved by shielding with a CAP with electroless nickel plating applied. Additionally, the measurement and verification results of the improvement method are also described.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.379-386
• /
• 2005

Among various kinds of hearing aids which have been developed so far. the conventional air conduction hearing aids have some problems such as the acoustic distortion, an howling effect due to acoustic feedback. Another type of hearing aid. the cochlear implant system can be applied to the profound imparied person. However. it shows the disadvantage that there is no possibility of recovery of the acoustic organ such as ossicle. On the other hand. the implantable middle ear heaving device directly vibratos the ossicular chain and has better sound qualify. good cosmetics for appearance. and wide frequency responses so that it can overcome the defects or the conventional hearing aids. In this paper, a mathematical modeling and a momentum equation derivation of the DET has been performed. For the optimization of the structure dimension generating maximal vibrating force of the DET. the computer simulation using a finite element analysis (FEA) software has been performed. Also. the vibrating transducer has been designed to make the frequency characteristics or the transducer be similar to those of the normal middle ear. Through the experimental results, the measured vibration characteristics of the DET has been evaluated to verify the performance for the application to implantable middle ear hearing devices.