• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.415-430
• /
• 1996

The purpose of this study was to evaluate the stress distributions in the surrounding tissues of the teeth seated by indirect retainers in three different teeth of unilateral distal extension partial denture when the dislodging forces were applied on denture bases. Three dimensional photoelastic models were made. The teeth on which indirect retainers were seated were mandibular left lateral incisor (Model I), canine (Model II), and first premolar (Model III). The dislodging force with 860mg at $45^{\circ}$ angulation to occlusal plane was applied to each model. Three dimensional photoelastic stress analysis was done, and the records were diagramed and analysed. The results were as follows : The compressive stresses were shown the most on neck portions of buccal, mesial, and distal sides in all three models. Slight tensile stresses were shown on neck portions of lingual sides in all three models. The compressive stresses on buccal side were shown in strength in such order as model I, model II, and model III. The compressive stresses were shown on neck portion of mesial and distal sides of model I and mode II, with model I more than Model II. The compressive stresses were shown only on neck portion of mesial side on Model III. The general overall magnitude of compressive stresses were shown in strength in such order as Model I, Model II, and Model III.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.275-291
• /
• 2002

Of various factors indicated for effective use of straight wire appliances, there was a great lack of studies both domestic and international about the curvatures of tooth crowns. This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth. For this study, three-dimensional laser scanning was performed on 36 dental casts with normal anatomic structures. Andrews plane and Facial axis of clinical crown (FACC) were designated as horizontal and vertical reference planes respectively. 2 or 3 lines, 1mm apart, were drawn superior, inferior, left and right of these reference planes. A three-dimensional coordinate table was made for points formed by crossing these lines, and averages of each coordinate point on the 36 dental casts were obtained. The curvature equation was made using three-dimensional coordinate points (x,y,z) and by this curvature equation, the curve ratio of each tooth was obtained. Curve ratio changes of each section of teeth were calculated by curve ratios of simplified curves. These two dimensional curves were simplified horizontally and vertically Conclusions for this study are as follows. 1. The basic data of labial and buccal clinical crown curvatures were obtained about Korean permanent teeth. 2. No significant difference was found between male and females. 3. Individual tooth characteristics 1) In maxillary central incisors, the difference in the curve ratio between the gingival and incisal sides was greater than for the other teeth. And the gingival side showed a greater curve ratio. 2) Maxillary canines showed more curvatures in the mesio-occlusal surface than the other surfaces. 3) In maxillary $1^{st}$ premolars, more curvatures were found in mesio-occlusal and disto-gingival surface, thus showing a twisted crown surface, but in maxillary $2^{nd}$ premolars, the crown curvatures of mesial and distal ends became parallel to each other. 4) No significant difference in crown curvatures was found between mandibular central and lateral incisors. 5) Occluso-gingival curvatures of mandibular$2^{nd}$ premolar turned out to be more rounded than mandibular $1^{st}$ premolars or maxillary $2^{nd}$ premolars. From the above conclusions, it can be deduced that the same bracket bases can be used for mandibular central and lateral incisors. But for maxillary $1^{st}\;and\;2^{nd}$ premolars and for mandibular $1^{st}\;and\;2^{nd}$ premolars, because crown curvatures showed significant differences, when making bracket bases there is ample reason to make bracket base curves differently for each type of tooth.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.278-283
• /
• 2017

Purpose: The aim of this study was to evaluate the interdental distances of anterior, premolar, and molar teeth at the cementoenamel junction (CEJ) and 2 mm below the CEJ in healthy natural dentition with cone-beam computerized tomography (cone-beam CT) in order to provide valuable data for ideal implant positioning relative to mesiodistal bone dimensions. Materials and Methods: Two hundred patients who visited Dental Hospital, Wonkwang University, who had natural dentition with healthy interdental papillae, and who underwent cone-beam CT were selected. The cone-beam CT images were converted to digital imaging and communication in medicine (DICOM) files and reconstructed in three-dimensional images. To standardize the cone-beam CT images, head reorientation was performed. All of the measurements were determined on the reconstructed panoramic images by three professionally trained dentists. Results: At the CEJ, the mean maxillary interdental distances were 1.84 mm (anterior teeth), 2.07 mm (premolar), and 2.08 mm (molar), and the mean mandibular interproximal distances were 1.55 mm (anterior teeth), 2.20 mm (premolar), and 2.36 mm (molar). At 2mm below the CEJ, the mean maxillary interdental distances were 2.19 mm (anterior teeth), 2.51 mm (premolar), and 2.60 mm (molar), and the mean mandibular interproximal distances were 1.86 mm (anterior teeth), 2.53 mm (premolar), and 3.01 mm (molar). Conclusion: The interdental distances in the natural dentition were larger at the posterior teeth than at the anterior teeth and also at 2 mm below the CEJ level compared with at the CEJ level. The distances between mandibular incisors were the narrowest and the distances between mandibular molars were the widest in the entire dentition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.502-509
• /
• 2003

After 800 students of Chonbuk National University was examined, 86 people (male : 43, female : 43, mean age : 22.2 years old) was selected as a group of normal occlusion. From their gypsum cast, this conclusion was obtained. 1. Intra-observer measurement errors in buccolingual diameter, maxillary lateral incisors have somewhat bigger errors. In mesiodistal diameter, maxillary first molars and maxillary second molar have bigger numerical value. Mean errors of measurement are 0.051mm at buccolingual diameter of crown and 0.083mm at mesiodistal diameter. 2. Fluctuating asymmetry is 0.030 average in buccolingual diameter, and 0.037 average in mesiodistal diameter. Statistically there are no big differences. 3. Male has longer buccolingual diameter than female in every permanent teeth. Teeth which have statistical difference in buccolingual diameter are maxillary lateral incisor, maxillary canine, maxillary second molar, mandibular central incisor, mandibular canine, mandibular second premolar, and mandibular first molar. In mesiodistal diameter maxillary central incisor, maxillary canine, and mandibular first molar have statistically difference. 4. Tooth which has the biggest difference depending on gender is maxillary lateral incisor in buccolingual diameter and mandibular canine in mesiodistal diameter. 5. Both sexes have similar crown index. Male has bigger value of crown module measurement and crown area measurement in every tooth. Crown area considered as size of tooth from occlusal surface was bigger in male than in female statistically except some teeth, maxillary first premolar, mandibular lateral incisor, first premolar and second premolar.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.661-668
• /
• 1997

There is a variation in the range of normal occlusion, and we must fit our treatment to the needs of each patient. If the upper or lower incisors are congenital)y missing, malformed, or crowded, the extraction of the incisor has some advantages over the extraction of premolars and nonextractions. The advantages are 1)simple mechanics, 2)reduced treatment time, 3)less relapse tendency, and 4)fewer facial profile changes. In order to decide which incisor should be extracted, we must consider certain factors 1)discrepancies in anterior arch length, 2)anterior tooth ratio, 3)periodontal and tooth health condition, and 4)the relationship between the upper and lower midline. Diagnostic set-up can be helpful to plan the treatment and show us the post treatment result.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.591-596
• /
• 2009

In the case of the impacted teeth, the clinician has to consider development of tooth, site of impaction, eruption path, and cooperation of patient. Treatment options for the management of impacted teeth are separated into four categories: observation, intervention, orthodontic or surgical relocation and extraction. Autotransplantation may be defined as the transplantation of embedded, impacted or erupted teeth, from one site to another in the same individual into extraction site or surgically prepared sockets. Autotransplantation ensures preservation of natural tooth, induction of alveolar bone growth and root development, offers one of the fastest and most economically feasible means in the replacement of young patients' missing teeth. This case presents a malpositioned impacted mandibular premolar of an 11-year-old girl. It was thought that orthodontic traction was difficult because of its unfavorable impacted position. Therefore the tooth was treated by autotransplantation, we can observe good healing pattern during 12 months.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.105-111
• /
• 1996

Most of orthodontic cases are treated with extraction of certain teeth, which influence the pre-eruptive movement of the lower third molar The purpose of this study was to evaluate the positional change of lower third molar following orthodontic treatment. Pre- and post-treatment pantomograms of 163 orthodontic patients (77 nonextraction group, 78 first premolar- extraction group, 8 second molar- extraction group) were analyzed in terms of the mesiodistal and buccolingual angles of lower third molar. The results were as follows. 1. The change of the mesiodistal angle of lower third molar by orthodontic treatment was significant in second molar-extraction group. 2. The mesiodistal angle of lower third molar in pre-treatment was significantly correlated to the mesiodistal angle in post-treatment and/or the change of the mesiodistal angle by treatment. 3. The change of the buccolingual angle of lower third molar by orthodontic treatment was significant in non -extraction group or first premolar-extrction group. 4. The change of the buccolingual angle of lower third molar by treatment was significantly correlated to the mesiodistal angle in post-treatment, the change of the mesiodistal angle by treatment, the buccolingual angle in pre-treatment or the buccolingual angle in post-treatment.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.23-34
• /
• 2005

Collective changes caused by orthodontic tooth movement evaluated in a specific treatment modality could give suggestive information on the specific treatment strategy. The aim of this study was to investigate retrospectively the characteristics of the orthodontic tooth movement during surgical-orthodontic treatment in order to provide an effective presurgical orthodontic treatment planning for the maxillary premolar extraction modality In the skeletal Class III malocclusion patient. Pre- and post-treatment dental casts of skeletal Class III malocclusion patients with nonextraction (N=:24) and the maxillary premolar extraction (N=31) were collected. The angulation and inclination measuring gauge(Invisitech Co. Seoul, Korea) was used to evaluate the orthodontic tooth movement. The changes in the maxillary and mandibular dental arch widths were also measured from the canines to the second molars. As a result, more palatal inclination change in the maxillary dentition was found with the premolar extraction modality than with the nonextraction modality. Linear regression analysis showed that the inter-arch width coordination was mainly due to the inclination changes of maxillary posterior teeth We conclude that the indications and proper treatment planning for surgical-orthodontic treatment in skeletal Class III malocclusion with maxillary premolar extraction could depend partly on the magnitude of the transverse inter-arch coordination especially in the maxillary dentition.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.99-111
• /
• 1998

The purpose of this study was to evaluate the positioning errors according to the method of bonding lingual brackets. Dental models of twenty orthodontic patients with malocclusion were selected for this study. The positioning errors were measured on each model that brackets were bonded to. Three different bonding methods were used. For the first method the bracket was bonded intimately to the lingual surface of the model. For the second method, the bracket was bonded intimately to the lingual surface after setting up using articulator. The passive bracketing, bonding the bracket ligated first to ideal archwire, was used after setting up as the last method. The results were as follows: 1. The brackets bonded without setting up showed greater angulation errors in the upper 1st premolar and the lower canine than those in other bonding methods. The brackets bonded without passive bracketing showed greater positioning errors in upper central incisor, lower 1st and End premolars. 2. The brackets bonded without setting up showed greater torque error in lower 2nd premolar than those in other bonding methods. The brackets bonded without passive bracketing showed greater torque errors in all upper teeth, lower 1st and 2nd premolars. 3. The brackets bonded without passive bracketing showed greater rotation errors between upper central incisors, lower central incisors, lower lateral and central incisor, lower canine and lateral incisor. 4. The brackets bonded without setting up showed greater in-out errors between upper canine and lateral incisor than those in other bonding methods. The brackets bonded without passive bracketing showed greater in-out errors between upper central incisors, upper central and lateral incisors, upper 1st and 2nd premolars, lower lateral and central incisors, lower canine and lateral incisor. These results suggest that there is a large amount of positioning error in lingual brackets even by an indirect bonding technique, and it may be reduced by passive bracketing.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.421-427
• /
• 1995

두개하악장애는 저작근, 측두하악관절 및 그와 관련된 구조물의 많은 임상적인 문제를 포함하는 포괄적인 용어이다. 두개하악장애의 원인은 다양하고 종종 다인성이며 위험을 증가시키는 여러가지 소인들이 존재한다. 이갈이나 이악물기 같은 이상기능습관은 흔하며 또한 임상적으로 많은 관련이 있는 것으로 사료된다. 그러나 이전의 연구에서는 연령증가에 따른 기능적 마모를 고려한 치아교모에 관한 연구가 시행되지 않고 단순한 교모도의 평가비교만이 시행되었다. 본 연구는 법치의학적 연령감정에서 널리 사용되고 있느 치아교모도를 이용한 연령감정법을 이용하여 두개하악장애환자의 치아교모도에 관한 연구를 시행하였다. 연령은 기능적마모에 따른 정도를 평가하기 위해서 고려되었다. 단국대학교 치과병원 구강내과에서 두개하악장애로 진단된 환자18명과 대조군으로 외래환자 14명을 대상으로 하였다. 연령차는 연령감정법의 추정연령과 환자의 실제나이의 차이를 구해서 비교분석하였다. 이상의 결과로 두개하악장애환자의 중절치, 측절치, 제1소구치, 제2소구치의 치아교모도가 정상군보다 유의성 있게 높았다.