• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.429-432
• /
• 2000

본 논문의 정수기는 영동산 일라이트를 필터의 주된 재료로 사용하였다. 구조는 여과필터를 교체하여 사용할 수 있도록 된 정수기의 필터 케이스 및 여과 방법에 관한 것으로써, 보다 상세하게는 필터 케이스가 분리, 결합이 간편한 본체와 마개로 구성되어 있다. 이 본체는 1차 여과부와 2차 여과부로 분리되어 물이 1차 여과부의 상부를 통해 인입되어 2차 여과부의 상부로 연결되도록 되어 있어 동일한 크기 내에서 여과구간이 2배로 길어져 여과 효율이 우수한 동시에 물인입구와 물배출구가 동일한 방향에 위치하여 다수 개의 필터 케이스를 연결할 때 필터 케이스의 간격을 좁힐 수 있어 필터 케이스의 설치면적이 좁다. 본체와 마개의 체결방식은 볼트 체결방식으로 되어 있으며, 마개는 플라스틱 재질이어서 본체에 마개를 단단히 체결하면 누수가 방지되도록 되어있다. 즉, 정수기의 필터하우징 성능과 영동산 일라이트가 가지고 있는 기능성을 이용한 필터를 사용함으로써 정수기에서 요구되어지는 정수능력을 가진 정수기를 개발 보고한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.653-659
• /
• 2014

Computer simulation has been performed to optimize cold forging process of automotive LPI fuel filter housing. A mold and the test product have been manufactured considering the strain and load distribution during the cold forging process. Also, fuel flow simulation has been performed to analyze flow characteristics of existing model and new model. Simulation result shows that two models have equivalent pressure drop. Compared with the mass of existing product, raw material reduction of 16 g and 30.5 g has been achieved from the upper and lower housing, respectively. Total mass reduction of the new housing was 46.5 g. Leak test and internal pressure test have been performed to verify the safety standard and test results were satisfactory.

• Clean Technology
• /
• v.8 no.3
• /
• pp.141-149
• /
• 2002

In the present study, flow fields inside a photocatalysis air cleaning system have been investigated to obtain the data for optimum design of the system. For this investigation, we first predicted the pressure drop of a photocatalysis filter. Based on this calculation, we replaced the filter by the porous media and analysed the performance of the entire system. This porous media assumption could predict characteristics of the cylindrical photocatalysis filter within 1%. Two cases of the cylindrical filter were considered in the present calculations. The first case had an inside diameter of 6 mm, while the second case had an inside diameter of 20 mm. It was found that the first case of filter showed a pressure drop three times higher than that of the second case. In addition, the cylindrical filter equipped with a housing to hold a number of cylinders in a bundle was also analyzed. When the housing was present, the pressure drop increased. It was found that the pressure drop is 8 times higher than that of the case when the housing was not equipped.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.125-126
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.101-102
• /
• 2009

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.425-428
• /
• 2000

본 논문에서는 영동산 일라이트가 갖는 기능성을 이용하여 정수기용 필터로써의 가능성을 검토한다. 대장균 실험을 통하여 항균성을 평가하였고, 여러 가지 중금속(Zn, Pb, Cu, Cd, Fe$^{2+}$)의 흡착능력을 평가하였다 정수기 필터재료로 사용하기 위한 성형조건을 실험하였고, 물 필터하우징에 성형된 illite ceramic을 충진하여 물을 정수 처리하여 버섯 재배에 적용하였다. 결과적으로 항균성은 white-yellow-red 순이었고 중금속흡착능력은 원소에 따라서 yellow가 white보다 크게 나타났고, 이에 착안하여 버섯재배에 적용한 결과 수율 향상에 크게 기여하는 것으로 나타났다. 본 논문에서 illite ceramic이 필터재료로서의 가능성을 나타내고 이를 개발, 보고 하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.749-750
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.93-94
• /
• 2007

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.171-178
• /
• 2008

Metal filter elements were newly introduced to the high temperature filter(HTF) system in the low- and intermediate-level radioactive waste vitrification plant. In order to evaluate the performance of various metal materials as filter media, elements made of AISI 316L, AISI 904L, and Inconel 600 were included to the test set of filter elements. At the visual inspection to the elements performed after completion of each test, a few dark spots were observed on the surface of some elements. Especially they were found much more at the AISI 316L elements than others. To check the dark spots are the corrosion phenomena or not, two kinds of analyses were performed to the tested filter elements. Firstly, the surfaces or the cross sections of filter specimens cut out from both normal area and dark spot area of elements were analyzed by SEM/EDS. The results showed that the dark spots were not evidences of corrosion but the deposition of sodium, sulfur and silica compounds volatilized from waste or molten glass. Secondly, the ring tensile strength were analyzed for the ring-shape filter specimens cut out from each kind of element. The result obtained from the strength tested showed no evidence of corrosion as well. Conclusionally, depending on the two kinds of analysis, no evidences of corrosion were found at the tested metal filter elements. But the dark spots formed on the surface could reduce the effective filtering area and increase the overall pressure drop of HTF system. Thus, continuous heating inside filter housing up to dew point will be required normally. And a few long-period test should be followed for the exact evaluation of corrosion of the metal filter elements.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.525-527
• /
• 2009

본 논문에서는 자동차 공조부품인 리시버드라이어로서 플랜지와 바디로 구성되어 있다. 리시버드라이어는 냉매 중 포함된 습기 및 기타 불순물을 차단하는 부품으로서 사이트글라스가 부착되어 냉매의 흐름의 상태를 알 수 있다. 또한 압력 밸브가 부착되어 있어 냉매 회로의 압력과 온도가 상승하면 녹아서 냉매를 배출하므로 배관이나 부품들의 압력에 의해서 파괴되는 것을 방지 할 수 있다. 최근 경제적 성형에 관심이 많아 대표적 성형공정인 냉간단조를 적용하여 소재 회수율 및 절삭 비용 등을 절감하는데 목적을 두었다. 냉간단조를 적용하여 자동차 공조 부품인 플랜지와 바디를 개발하는데 공정설계, 금형설계, 금형제작 기술을 확보하였다.