• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1384-1390
• /
• 2008

The TCP protocol is originally designed for wired network, however it performs very poor in wireless network due to different nature of wireless network from wired networks. In terms of TCP performance improvement in wireless Ad-hoc network, many researches show that small congestion window size of TCP connection can improve TCP performance. We propose a new TCP algorithm to improve TCP performance in wireless Ad-hoc network. The basic idea of our approach is that TCP receiver estimates the optimum window size and then sets congestion window limit of TCP sender to an optimum value by using the advertised window field in TCP ACK packet. From extensive computer simulation, the proposed algorithm shows superior performance than traditional TCP protocols in terms of packet delivery ratio and packet loss.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.97-103
• /
• 2020

Wireless sensor networks collect and analyze sensing data in a variety of environments without human intervention. The sensor network changes its lifetime depending on routing protocols initially installed. In addition, it is difficult to modify the routing path during operating the network because sensors must consume a lot of energy resource. It is important to measure the network performance through simulation before building the sensor network into the real field. This paper proposes a WSN model for a low-energy adaptive clustering hierarchy protocol using DEVS kernel models. The proposed model is implemented with the sub models (i.e. broadcast model and controlled model) of the kernel model. Experimental results indicate that the broadcast model based WSN model showed lower CPU resource usage and higher message delivery than the broadcast model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.45-52
• /
• 2019

This paper proposes the design of a closed-loop stepping motor drive for real-time Ethernet (RTE), which can be easily applied to a variety of RTE protocols. The proposed design is divided into a closed-loop step motor drive which can be reused for various types of RTE protocol and RTE module developed for each specific RTE protocol. It is based on a layered architecture so that the motion control algorithm can be easily reused independently of the RTE protocol and motion profile. To verify the proposed design, closed-loop motor drives based on EtherCAT and Mechatrolink III were developed and their performances were evaluated. Cycle time was measured to verify the real-time communication performance of the developed EtherCAT and Mechatrolink III based motor drive. As a result, the EtherCAT was 7.5 times faster than the Mechatrolink III when 32 motor drives were connected.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.389-399
• /
• 2021

The research background of this paper is because the u-convergence information system applying flow theory lacks the measurement of tourist satisfaction. The purpose and research method of this study are as follows. The first is the suggestion of flow relation information display format algorithm. Second, by combining this algorithm and flow theory, a pattern algorithm was created according to the content information quality and the personality type of tourists. The expected effect of this study is to derive the success factors of the u-convergence information system by generating a pattern algorithm according to the flow relationship information display format and the tourist's personality type. The limitations of this paper are limited to one area, and objectivity is poor due to the lack of data and small area. In the future, it is necessary to evaluate the effectiveness through analysis after applying the method presented to other tourist destinations. Future tasks will need to be supplemented with data from expert groups and objectivity in various regions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.73-78
• /
• 2020

Musculoskeletal disease is often caused by sitting down for long period's time or by bad posture habits. In order to prevent musculoskeletal disease in daily life, it is the most important to correct the bad sitting posture to the right one through real-time monitoring. In this study, to detect the sitting information of user's without any constraints, we propose posture measurement system based on multi-channel pressure sensor and CNN model for classifying sitting posture types. The proposed CNN model can analyze 5 types of sitting postures based on sitting posture information. For the performance assessment of posture classification CNN model through field test, the accuracy, recall, precision, and F1 of the classification results were checked with 10 subjects. As the experiment results, 99.84% of accuracy, 99.6% of recall, 99.6% of precision, and 99.6% of F1 were verified.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.839-845
• /
• 2006

A laser docking system provides a centimeter-level accuracy distance from jetty mounted laser sensors in order to help a vessel to approach to a pier. It is very accurate & useful, whereas there are too many considerable problems. Laser sensors of the laser docking system need to be correctly positioned and installed on a jetty to allow for full range of vessels to be berthed and to consider loading condition and tidal variations. Above all, the laser docking system is expensive and its service coverage is limited. In order to solve these problems, CDGPS positioning method using GPS satellites has been proposed. This paper presents that, through RHDOP simulation, the previous CDGPS positioning method using only GPS satellites is not able to provide the continuous service with centimeter-level positioning accuracy. And this paper proposes a pseudolite-augmented positioning method for vessel docking in order to solve the problem of the continuous service on the previous CDGPS positioning method. In this paper, pseudolite is used to aid in CDGPS positioning. This paper shows that the proposed method can provides the continuous service through comparison analysis of RHDOP simulation results between the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation. Furthermore, it is shown that the proposed positioning method satisfies the positioning performance required for vessel automatic docking at a test bed designed for performance evaluation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.15-15
• /
• 2017

본 연구는 필드 작업 시 작업조건에 따른 정식기의 PTO 부하를 측정하고, 이를 이용하여 작업조건에 따른 안전율 시뮬레이션을 목적으로 수행하였다. 부하 계측 시스템은 PTO 축의 부하를 측정하기 위한 토크 센서, 토크 센서에서 발생한 신호를 수집하기 위한 데이터 수집장치, 노트북에 전원을 공급하기 위한 파워 컨트롤러로 구성하였다. 토크센서에서 입력된 부하 데이터를 처리하기 위한 소프트웨어는 Labview(Version 2011, National Instrument, USA)를 사용하였다. 포장시험은 유사한 토양 조건에서 4회 반복 시험을 수행하였으며, 작업속도 고속 조건에서 4개의 주간거리(26, 35, 43, 80cm)와 3개의 식부깊이 (85, 105, 136mm)에 대하여 수행하였다. 안전율 시뮬레이션을 위한 소프트웨어는 KISSsoft(Version 2016, Kissling & Co. AG, Switzerland)를 사용하였다. 식부깊이 85mm에서 주간거리 26, 35, 43, 80cm일 때 작업시 각각 굽힘 안전율은 2.2874, 2.4507, 2.7139, 2.8064로 나타났으며 접촉 안전율은 1.1787, 1.2799, 1.3205, 1.3275로 나타났다. 식부깊이 105mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 2.1261, 2.2781, 2.4879, 2.5866로 나타났으며 접촉 안전율은 1.1296, 1.1425, 1.2710, 1.2507로 나타났다. 식부깊이 136mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 1.6587, 1.6651, 1.7824, 2.2198로 나타났으며 접촉 안전율은 1.0030, 1.0104, 1.0450, 1.1931로 나타났다. 주간거리에 따른 식부깊이의 굽힘 안전율과 접촉 안전율은 가장 차이가 큰 주간거리 80cm에서 식부깊이가 85, 105, 136mm일 때 작업 시 각각 굽힘 안전율은 2.8064, 2.5866, 2.2198로 나타났으며 접촉 안전율은 1.3275, 1.2507, 1.1931로 나타났다. 시뮬레이션 결과 정식기 베벨기어의 안전율은 주간거리가 짧을수록, 식부깊이가 깊을수록 더 낮게 나타났다. 그러므로 정식 작업 시 정식기의 부하와 내구성을 고려하여 적절한 작업조건을 선정해야 함을 알 수 있다. 또한 향후 다양한 토양 조건 및 작업 단수 등에 따른 포장시험을 추가로 진행하여 여러 조건에서의 안전율 시뮬레이션을 수행할 예정이다.

• Journal of the Korean Society for information Management
• /
• v.37 no.2
• /
• pp.197-223
• /
• 2020

The purpose of this study is to analyze the issues resulted from the process of grouping KORMARC records using FRBR WORK concept and to suggest a new method. The previous studies did not sufficiently address the criteria or processes for identifying representative authors of records and their derivatives. Therefore, our study focused on devising a method of identifying the representative author when there are multiple contributors in a work. The study developed a method of identifying representative authors using an author role dictionary constructed by extracting role-terms from the statement of responsibility field (245). We also designed another way to group records as a work by calculating similarity measures of authors and titles. The accuracy rate of WORK grouping was the highest when blank spaces, parentheses, and controling processes were removed from titles and the measured similarity rates of authors and titles were higher than 80 percent. This was an experiment study where we developed an author-role dictionary that can be utilized in selecting a representative author and measured the similarity rate of authors and titles in order to achieve effective WORK grouping of KORMARC records. The future study will attempt to devise a way to improve the similarity measure of titles, incorporate FRBR Group 1 entities such as expression, manifestation and item data into the algorithm, and a method of improving the algorithm by utilizing other forms of MARC data that are widely used in Korea.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.168-172
• /
• 2014

A new sustain driving method is proposed to improve luminous efficiency by the generation of the self-erasing discharge during a sustain period in AC plasma display panel. As one subfield time in the conventional AC PDP is divided into the reset, address, and sustain period. Among them, as the square sustain waveform is alternately applied to the X and Y electrodes on the front plate during the sustain period, the plasma discharge for displaying the image is continuously produced. Meanwhile, in the conventional driving method, the address waveform applied to the A electrode on the rear plate is only driving during an address period and grounded during a sustain period. In this experiment, the negative pulse is applied to the A electrode at the latter part of the sustain pulse for improving the luminous efficiency producing the self-erasing discharge during the sustain period. The negative pulse on the A electrode can change from the space to the wall charge and induce the additional discharge by the accumulated wall charge when the voltages of three electrodes are grounded. As a result, the luminous efficiency will be measured with changes in the voltage level of the A electrode and the new driving method can be improved to the luminous efficiency about 32 % compared with the conventional driving method.