• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.1
• /
• pp.63-71
• /
• 2020

The purpose of this study was to analyze the growth characteristics of perilla according to the materials of the seedbed for the development of seedling plug technology suitable for the mechanical transplantation of perilla. Perilla (Perilla frutescens var. japonica Hara) cultivars Deulsaem and Sodam were used in this experiment. The composition ratios of 170 products from 16 companies published in the 'Korean Association of Seedbed Media' homepage were compared according to usage and type, and 11 products that corresponded to the average were selected. The seedbed was classified according to the seedbed for paddy rice as light-weight, semi-weight, and weight, and based on the seedbed for horticulture, as light-weight and ultra-light. The seedlings were placed in 72-cell (semi-automatic), 128-cell (automatic) and 220-cell (automatic) plug trays. We selected 2 light-weight seedbeds of paddy rice and 2 light-weight seedbeds of horticultural products with the highest plant growth. We analyzed plant height and mat formation of the perilla roots. Results showed that the perilla height and mat formation were the best in light-weight seedbeds of paddy rice (product R1). Therefore, light-weight seedbeds of rice (product R1) were suitable for perilla plant transplantation. The estimated major components were vermiculite 41.0%, cocopeat 31.0%, peat moss 5.7%, and red-yellow soil 20.0%. The mechanical transplantation of perilla significantly boosts plant growth and reduces sowing and thinning efforts. However, continuous evaluation of newly introduced, commercial seedbeds is needed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.98-106
• /
• 2010

This study focuses on the appropriate planting soil for Vitex rotundifolia by planting soil. Different soil depth levels were achieved at 15cm and 25cm in the green roof module system that was created with woody materials for a $500{\times}500{\times}300mm$ area. The soil mixture ratio was $S_{10}$, $L_{10}$, $S_7L_3$, $S_5L_5$, $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$ and $P_4P_4L_2$. This study was carried out over five months between April and September, 2006. The amount of soil moisture tends to decrease according to the planting soil. For the experimental items $S_{10}$, $S_7L_3$ and $S_5L_5$, the amount of soil moisture tends to decrease rapidly. However, for the experimental items $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$ and $P_4P_4L_2$, conditions containing perlite and peat moss, the amount of moisture tends to decrease more gradually. As a result, the use of soil-improving amending for the afforestation planting of roofs with a low level of management is need. After experimenting with the ratio of soil mixture for Vitex rotundifolia, the planting soil for experimental item $P_6P_2L_2$, $P_5P_3L_2$ and $P_4P_4L_2$ appeared excellent. For experimental item $S_{10}$, the growth of Vitex rotundifolia seemed to be weaker than that of others, because of the low levels of moisture and organic matter in the soil. For experimental item $L_{10}$, there appeared to be a low level of growth, even when the levels of moisture and organic matter were high. This may have occurred because of the low level of soil pH and the excessive amount of exchangeable cation. At the depth of 25cm, the growth of Vitex rotundifolia is vigorous overall. For experimental item at 15cm, Vitex rotundifolia was able to survive for 14 days without any rainfall and Vitex rotundifolia was better in amended soil, $P_6P_2L_2$, $P_5P_3L_2$ and $P_4P_4L_2$, than natural soil, SL.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.319-325
• /
• 2018

The aim of the present study was to determine the influence of different fertilizer combinations on the growth, yield, and fruit quality of 'Duke' blueberry cultivar and the water quality of growth medium. The experiment was carried out with three year old 'Duke' blueberry bushes which were cultivated in containers ($60{\times}80{\times}40cm$) filled with 130 L peat moss and 40 L pearlite (v/v). Sawdust was used as the mulch in growth containers. Three different fertilizer combinations (FC) i.e., FC-1 consisted with standard solution, FC-2 consisted with nitrogen reduced by 10% from FC-1, and FC-3 consisted with nitrogen reduced by 20% from FC-1 were tested while, the ground water used as the control. The effects of different fertilizer combinations on shoot diameter, shoot length, number of shoots, leaf length, SPAD value (the relative content of chlorophyll), berry weight, soluble solids content, titratable acidity, and yield per bush in 'Duke' blueberry were examined. Also, the effects of different fertilizer combinations on pH, EC, $NH_4$ and $NO_3$ in 'Duke' blueberry growth medium were monitored. The highest pH and lowest EC, $NH_4$ and $NO_3$ in growth medium was recorded with control treatment during the experiment period. The maximum shoot diameter (3.7 mm) and shoot length (35.7 cm) was recorded for the FC-1. Highest number of shoots (47%) were recorded from 'Duke' blueberry bushes supplemented with FC-1 compared to other treatments. The fertilizer combinations supplemented with nitrogen showed significant influence on leaf length and SPAD value compared to control 'Duke' blueberry bushes. However, the fruit quality attributes, i.e., berry weight, soluble solids content, and titratable acidity were not significant different among fertilizer treatments. The significantly highest yields per bush were recorded for FC-1, FC-2, and FC-3, as 2.2, 2.9, and 2.7 kg, respectively compared to control (0.2 kg). Although, the FC-1 was supplemented with highest nitrogen content it resulted low yield per bush while having high number of shoots and vigorous growth.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.447-453
• /
• 2019

In this study, the effect of supplying volume and frequency of a nutrient solution consisted with $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3, K 3, Ca 4.6 and Mg $2.2mmol{\cdot}L^{-1}$ on growth and fruit quality of 'Duke' blueberry was investigated. Three years old 'Duke' blueberry bushes cultivated in containers ($60{\times}80{\times}40cm$) filled with 130L peat moss and 40L pearlite (v/v) were selected for the experiment. The growth containers were mulched with sawdust. Two different volumes (4L and 8L) of nutrient solution was tested at three different supplying frequencies (one time, two times, and three times) per week and the drainage quality of nutrient solution and fruit quality of 'Duke' blueberry was evaluated. The optimal drainage rate for the vegetable cultivation is known to be 20-30%. The results revealed that the average drainage rates of 27% and 29% for the nutrient solution supplied in 'Duke' blueberry growth medium at 4L, 2 times/7 days and 4L, 3 times/7days, respectively. The highest shoot diameter (4.2mm) and shoot length (31cm) of 'Duke' blueberry was recorded with the 8L of nutrient solution supplied at 3 times per 7 days. According to the analysis of inorganic components in the drainage of nutrient solution, there was a tendency of absorbing nitrogen at the early stage of growth. The supplying volume and frequency of nutrient solution was not significantly affected on 'Duke' blueberry fruit weight, soluble solids content, and titratable acidity. The highest yield per bush (2.7kg) was recorded for the nutrient solution supplied with 4L at three times per 7 days, while the 4L nutrient solution supplied at one time per 7 days resulted the lowest yield of 1.4kg per bush. Consequently, the tested nutrient solution can be applied for the 'Duke' blueberry bushes with the volume of 4L at three times per week for the better crop growth.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.33-43
• /
• 2016

Pinellia tripartita(Blume) Schott is a herbaceous perennial plant belonging to the Araceae and distributed on Asia including of Korea, Japan, and China. P. tripartita is often used for gardening but has not been developed mass-breeding methods. In this study, we compared the tuber growth in different combinations of mixed soils used six compositions. Tubers used to study was cultured in vitro and divided into two groups. Type I was diameter more than 1cm and the group of Type II was diameter below than 1cm. Enlargement of tubers and growth of aerial parts were measuring the plant height, number of fresh leaves and dead leaves, number of bullets, tuber size, and fresh / dry weight. The size/weight and numbers of tubers from the mixed soil B (coir 68.0%, peat moss 14.7%, perlite 3.0%, vermiculite 7.0% and zeolite 7.0%) were the best grown up for eight weeks. In case of Type I, GI (Growth index) of tuber size and weight were 45% and 101%, respectively. The difference of growth was doubled compared to the bad growth treatment as the mixed soil E(Coir 14.3%, peat moss 14.3%, perlite 42.9%, vermiculite 14.3%, and zeolite 14.3%). These results could be used as the basic information for the similar experimental design for the P. ternata.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.147-155
• /
• 2016

This study presented a measure for turning by-products, released from land farming sites, into resources. The measure involved adding food by-products such as rice bran and nonfat soybean to the sludge, released from the eel farming sites, inoculating the lactic acid bacteria, Aspergillus oryzae, and Bacillus subtilis by step, fermenting them, and measuring the changed ingredients of the fermented fodder. The water content of the fermented fodder by the step of preparation was the first-step fermented product (14.6%) using the lactic acid bacteria, and the second and third-stage fermented product (33.0% and 34.0% respectively) using Aspergillus oryzae and Bacillus subtilis. The pH level was found to be 5.38 in the first-step fermented product due to the secretion of lactic acid caused by the lactic acid bacteria, and the pH level of the second and third-stage fermented products was 5.66 and 7.26, respectively, showing that the pH level increased. The phytic acid content was 0.126g/100g in the first-step fermented product, 0.004g/100g in the second-stage fermented product, and 0.093g/100g in the third-stage fermented product. The measurement of nitrogen content revealed that the amino nitrogen content was high with 1226.37mg% in the second-stage fermented product, and a little lower with 710.18mg% in the third-stage fermented product. The ammonium nitrogen content increased from 0.988mg/kg in the first-stage fermented product to 1.502mg/kg in the third-stage fermented product. Total nitrogen content increased to 2.78% in the first-stage fermented product, 4.08% in the second-stage fermented product, and 4.85% in the third-stage fermented product. As fermentation continued with the three microbes, the phytic acid decreased, and the protein decomposition rate increased. Also, due to the 3 step fermentation, the low-molecule nitrogen ingredient content increased, suggesting that the fodder was developed to offer high digestion and absorption.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1605-1616
• /
• 2004

The purpose of this study was to investigate the commonly accepted ease for a custom-fit business jacket, which provides all customers with the optimum fit regarding their individual body sizes, shapes as well as their personal preference, and also to characterize the factors which affects the ease amount, thereby, supply the reference data to manufacturers of the apparel industry. This study consisted of anthropometric measurements as well as sensory evaluations, and analysed ease amount by body sizes, ages, fit satisfaction, self-perception of body, and the prefered fit levels. There were 272 subjects for anthropometric measurement of which 128 subjects were applied for ease analysis and sensory evaluation. The subjects were males of 20 to 65 years old. The ease at chest was the most sensitive to body sizes and shapes, while waist and hip were easily modified to accommodate the silhouette of the jacket. The main dimensions affecting individual perceptions of fit and ease were the characteristics of body shape, in particular, girth, followed by age. Customers paided most attention to the shoulder fit while customers who preferred a more fitted line showed more concern with ease for jacket fit. It was clearly observable in case of waist fit preference. In addition, the preferred fit at chest, waist and hip would be changed by the perception of ons's hip size.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.463-471
• /
• 2012

Objective of this study is to provide basic information for developing more differentiated and targeted forest healing policy and Korean medical healing programs grounded on consumer preference for forest based Korean medical healing tourism products. The internet survey(CAWI) by percentage quota sampling with 400 Seoulite ages over 30 by the age, area, and gender was conducted, and 317 samples were used for a final analysis. 61.5% of the Seoulite associated 'forest bath/walking in the woods/tree' with an image of a forest based Korean medical healing tourism product, and preference for the product and the intention to use were positive at the percentages of 72.9% and 67.5%, respectively. Preferred areas were Seoul/Gyeonggi-do(53.5%) and Gangwon-do(38.8%). 'Stress solving and refreshment', 'taking a forest bath and a walk', and 'maintaining and promoting health' were the main purposes of the use. As for a therapy, 'walking therapy' was most preferred, and 'ergotherapy' was the next. First priority as for a use facility was 'healing trail', and 'professional medical facility' ranked second. Although important decision attributes were ' cost of use', 'food', and 'friendliness of medical staff', all the other sets of attributes related to use convenience, quality of medical service and tourism activities also recorded high, which forecasts higher consumer expectation for the product. As the result showing differences in consumer preference by the demographic segmentation, differentiated and segmented consumer needs should be considered when planing and managing a product. The scope of the study is limited to a demographic segmentation which is a basic stage of understanding consumer preference, therefore more detailed future researches on complicated and multi-dimensional consumer needs are required.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• Journal of Plant Biotechnology
• /
• v.39 no.2
• /
• pp.114-120
• /
• 2012

An efficient in vitro propagation was established by using axillary bud explants of roseroot (Rhodiola rosea L.), which has been known as a medicinal plant in East Asia. Among various media tested, MS medium supplemented with 1.0 mg/L BA and 1.0 mg/L $GA_3$ was found to be the best for multiple shoot formation (15 axillary shoots per axillary bud). In addition 1/2MS medium containing 50 g/L sucrose was best for shoot elongation (7.8 cm) and increasing total chlorophyll contents (8.64 mg/g) best. Maximum number of roots (17.7 roots per explant) was observed on the medium without plant growth regulators. Propagated plants were successfully acclimatized to ex vitro conditions, with a survival frequency of 97% after 12 weeks. Most rooted shoots grew well and produced viable seeds when grown in vitro culture conditions. Therefore, R. rosea can be effectively propagated in vitro by the system we developed in this study.