• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.822-831
• /
• 2009

The porcelain insulators are important devices, that are used to isolate electrically and hold mechanically in the high-voltage power transmission systems. The faults of the insulators induce very serious problems to the power transmission line. In this paper, we introduce techniques for fault detections of insulators by acoustic radiation noises from them. We measured radiation noises from normal state insulators and fault state insulators. The used insulators were two different type porcelain insulators, a cut out switch, two different type line posters, and a lightning arrester. Each results was compared each other in time domain, frequency domain and filter banks' outputs. We found the possibility of detection of insulators' faults and also suggested techniques for fault detections.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.138-148
• /
• 2005

Dynamic response of floating structures such as floating body and floating bridges subject to wave load is to be calculated in frequency domain. Added mass coefficient, damping coefficient and wave exciting force are obtained numerically from frequency domain formulation of linear potential theory and boundary element method for a floating body which is partially submerged into water and subjected to wave force. Next, the equation of motion for the dynamic behavior of a floating structure which is supported by the floating bodies and modeled with finite elements is written in frequency domain. hker a hemisphere is analyzed and compared with the published references as examples of floating bodies, the hydrodynamic coefficients for a pontoon type floating body which supports a floating bridge are determined. The dynamic response of the floating bridge subject to design wave load can be solved using the coefficients obtained for the pontoons and the results are plotted in the frequency domain. It can be seen from the example analysis that although the peak frequency of the incoming wave spectrum is near the natural frequency of the bridge, the response of the bridge is not amplified due to the effect that the peak frequency of wave exciting force is away from the natural frequency of the bridge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.233-242
• /
• 2018

Previous works for detecting arrhythmia have mostly used nonlinear method such as artificial neural network, fuzzy theory, support vector machine to increase classification accuracy. Most methods require higher computational cost and larger processing time. Therefore it is necessary to design efficient algorithm that classifies PVC(premature ventricular contraction) and decreases computational cost by accurately detecting feature point based on only R peak through optimal R wave. For this purpose, we detected R wave through optimal threshold value and extracted RR interval and R peak pattern from noise-free ECG signal through the preprocessing method. Also, we classified PVC in realtime through RR interval and R peak pattern. The performance of R wave detection and PVC classification is evaluated by using 9 record of MIT-BIH arrhythmia database that included over 30. The achieved scores indicate the average of 99.02% in R wave detection and the rate of 94.85% in PVC classification.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.137-140
• /
• 1999

본 논문에서는 디지털 보청기의 자동보정법을 제안하고 이를 이용하여 구현한 보정시스템에 대하여 기술한다. 일반적으로 난청환자의 청각 손실은 전 주파수를 걸쳐 일정하게 발생하는 것이 아니라, 고음 또는 저음 등 일부 특정 주파수 대역의 청각특성의 이득이 다른 주파수에 비해 상대적으로 낮아져서 생기는 현상이다. 그러나 현재까지의 보청기는 이와 같은 청각 손실을 가지고 있는 환자들에 대하여 전 주파수 대역의 음압을 동일 비율로 높여주는 문제가 있다. 이와 같은 보청기로 보정하게 되면, 주파수 대역별 균형이 맞지 않기 때문에 소리가 변형되어 들리게 되고, 명료도 또한 떨어지게 된다. 또한, 기존의 아날로그보청기는 생산공정 중에 잡음 피크 제거, 리미터 조정, 이득 조정(GC) 등의 작업을 수동으로 수행하게 되는데, 이는 작업공정이 복잡하고 개개인에 청각특성에 맞는 정확한 보정이 불가능한 문제점을 안고있다. 이와 같은 문제점을 해결하기 위하여 제안한 자동보정 시스템은 각 주파수 대역별 최적화된 파라미터를 자동적으로 찾아서 입력하므로 보다 정확하고 신속한 보정이 가능하게 된다. 이 시스템은 외부 IC 콘트를 장치인 Hl-PRO를 이용하여 PC 환경 하에서Visual Basic으로 구현하였으며 시스템의 출력값을 측정하여 검토한 결과 구현한 자동보정법이 유효함을 확인할 수 있었다.

• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.39-50
• /
• 1994

Diamond thin films were deposited on silicon, molybdebum, titanum and tugsten substrates, and were chlwntnizen using scanning electron microscopy, X-ray diffraction analysis and Raman spectroscopy. From the result of experiment in various deposition periods, it was found that found that were nucleated and grown on interlayed carbide layers, which were formed on refractory metal substrates at the initial stage of.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.63-64
• /
• 2006

본 연구에서는 광에너지를 화학적인 에너지로 변환할 때, 디바이스의 전하전달 매개를 위한 electron transfer mediator로서 널리 이용되는 Viologen이 자기조립화된 수정진동자률 전기화학법의 하나인 순환전압전류법(Cyclic Voltammetry)을 이용하여 산화 환원 반응 (redox reaction) 특성과 주사속도와 피크전류와의 상관관계를 분석하였다. 먼저 수정진동자를 친수 처리한 후, 메탄올 용액과 아세토니트릴 용액을 섞은 용매에 Viologen 분자를 자기조립 (self-assembly)하여, 전해질 용액의 농도 변화에 따른 산화 환원반응 특성과 피크전류의 값을 측정하였다 주사 속도를 2 배씩 증가하여 피크전류와의 상관관계를 조사한 결과, 선형적인 증가를 보였으며, 이를 통해 가역적인 반응(reversible reaction)이 일어났음을 확인할 수 있었다. 또한, 산화 환원 반응과 동시에 측정된 수정진동자의 공진 주파수(resonant frequency) 변화로부터 전하이동(charge transfer) 특성에 의해 반응에 참가한 이온의 질량을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2007-2009
• /
• 2008

본 논문에서는 인체에 열을 가했을 때 심전도(ECG) 신호에서 얻어진 Heart Rate Variability(HRV)와 광전용적맥파(PPG)에서 얻어진 Photoplethymograph Variability(PV)의 상관관계를 보기 위하여 피실험자가 상온에서 누워 있을때와 65$^{\circ}C$의 온도로 누워있을때의 심전도와 PPG를 측정하여 두 파라메터의 상관관계를 분석하여 그 효용성을 평가하였다. 이를 위하여 우선 신체 건강한 26세에서 32세까지 총 3명의 남성을 대상으로 하여 ECG와 PPG를 위와 같은 조건에서 측정한 다음, 두 신호로부터 피크를 검출하고, 피크 간격을 시계열 신호로 변환하여 HRV와 PV신호를 얻어 내었다. 또한 얻어진 HRV신호와 PV신호의 주파수 분석을 통하여 HF 및 LF성분을 비교하여 HRV와 PV의 상관관계를 비교하였다.

• Journal of Korea Multimedia Society
• /
• v.4 no.2
• /
• pp.116-129
• /
• 2001

To improve the performance of the inverse halftoning, smoothing masks should be designed optimally by using the accurate information of halftone cells. In this thesis, the method of energy minimization is so defined as to determine the exact information of halftone cell. A heuristic search method is proposed to obtain efficiently the parameters of halftone cells which determine the minimum energy. A halftone-peak modeling method with several functions is proposed and used to get initial values of the parameters. The dimension decomposition technique is also adopted to speed up the search process of energy minimization. Several experiments show that the proposed method extracts correct location of the seed pixel of the halftone cell and the extracted information of the halftone cell can be used to get more exactly smoothed color images. The proposed method can be applied to extract the texture patterns, to separate channel images of a scanned color halftone image, and to extract the moire area in an image.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

This paper presents and compares several techniques that detect the symbol rate of unknown received signal. Symbol rate is detected from the power spectral density of the circuits such as the delay and multiplier circuit, the square law circuit, and analytic signal, etc. As a result of discrete Fourier transform of the output signals of these circuits, a lot of spectral lines and some peaks appear in frequency domain and the position of first peak is corresponding to the symbol rate. If a spectral line on the frequency that is not located in symbol rate is larger than the first peak, the symbol rate is erroneously detected. Thus, the ratio between the value of first peak and the highest side spectral line is used for the measure of the performance of symbol rate detector. For the MPSK modulation, the analytic signal method shows better performance than the delay and multiplier and square law circuits when the received signal power is lager than -20dB. It is also noted that the delay and multiplier circuit is not able to detect the symbol rate for the QAM modulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.148-153
• /
• 2011

In this paper, an inverse class E frequency multiplier has been designed to generate 5.8 GHz wireless LAN signal by multiplying 2.9 GHz input. The inverse class E frequency multiplier is operating with low inductance value and low peak drain voltage than the class E frequency multiplier. Measurement shows the output power of 21 dBm, the mutiplier gain of 6 dB, and the PAE(Power Added Efficiency) of 35 % with 15 dBm input power.