• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.320-322
• /
• 2010

저용량 에어컨의 압축기에 많이 사용되는 Single rotary 방식은 하나의 피스톤만을 채용하여 가격적인 면에서 큰 이점을 가진다. 그러나, 압축기 모터가 1회전할때 마다 압축과 토출을 단 1회 거치게 되므로, 부하변동을 심하여 진동이 많이 발생하는 단점이 있다. 이러한 단점을 보완하기 위하여 Single rotary를 사용하는 에어컨 제품에서는 저속에서의 운전을 회피하거나 하나의 운전점에 대한 전향보상기를 채용하여 진동을 저감시켜 왔다. 본 논문에서는 모든 운전점에서 보상이 가능하도록 압축과 토출로 인한 부하의 패턴에서 각 주파수 성분을 분석하여 자동으로 부하 토크를 보상하는 알고리즘을 제안한다. 제안된 방법은 가장 영향이 큰 1차와 2차 주파수 성분의 속도 리플의 양을 FFT 하고, 그 양이 작아지는 방향으로 부하 토크를 전향 제어방식으로 인가하는 방식이다. 제안된 방식을 이용하여 저속 운전에서 진동이 저감 되는것을 실험을 통하여 보였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.3
• /
• pp.147-153
• /
• 1989

Laboratory measurement of compressional wave velocity for two piston cores has been carried out successfully. The cores penetrated into the Holocene mud deposit located just off the Pusan harbor. Differences between the mercury delay method using a mercury column and the time delay method utilizing a digital processing oscilloscope for the observed velocity are negligible. Thus, both methods can be used independently to determine the velocity of unconsolidated marine sediment. The core velocity is, however, always higher than the velocity calculated from the seismic profile. This result should be considered seriously to interprete a seismic profile, otherwise one may encounter systematic error in calculating sediment thickness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.66-71
• /
• 2021

A hydraulic quick coupler is a component used to easily connect or disconnect pipes or hoses that transfer high pressure fluid without leakage in various mechanical devices. In this study, to obtain an optimal design of a 3/8" hydraulic quick coupler, the effect of different shapes of the internal piston on the internal flow characteristics of the coupler was analyzed and evaluated through numerical analysis based on computational fluid dynamics. Subsequently, the optimal shape design of the internal piston was obtained by comparing the flow characteristics results such as velocity distribution, temperature distribution, and the pressure drop of the hydraulic quick coupler.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.63-64
• /
• 2012

A pyrotechnic actuated device (PAD) is a component that delivers high power in remote environments by combustion of a self-contained energy source. Historically, the design of these devices has been largely empirical and considered to be an art. In this study, an overview for developing an analytical model is introduced that efficiently evaluates performance of PAD. The model is integrated by three parts of different disciplines that are coupled in sequence with each other. First is the solid explosive burning to form product gas within an actuator and transport to an expansion chamber. Second is the insertion of initially tapered piston into a small hole by gas pressure in the chamber. Third is the shear cutting of the diaphragm from the piston to enable gas flow into the conduit. Some results of preliminary study for each of three parts are introduced in the presentation.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.249-258
• /
• 2001

Compressional wave velocity and electrical resistivity of muddy sediments in the southeastern inner shelf of Korea were studied using nine piston core samples. The acoustic and physical properties were measured with 10 cm depth interval. Sediment structures were examined by x-radiographs of the cored sediments. Subbottom profiles were obtained by a high-resolution acoustic subbottom profiler. Acoustic turbid layers are clearly seen on the profiles, and x-radiographs of the sediments showed degassying structures formed by gas escaping. On the basis of x-radiographic images, velocities, electrical resistivities and physical properties, the sediments are divided into gassy and non-gassy sediments. The presence of gas and degassying structures result in a marked variation in velocity and electrical resistivity. It can be concluded that velocity and electrical resistivity arep arameter to recognize gassy sediment. The velocity is important parameter to indicate gassy sediment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.25-30
• /
• 2013

The piezoelectric-based hydraulic actuator is a hybrid device consisting of a hydraulic pump driven by piezoelectric stacks that is coupled to a conventional hydraulic cylinder via a set of fast-acting valves. Nowadays, such hybrid actuators are being researched and developed actively in many developed countries by requirement of high performance and compact flight system. In this research, operation principle and performance testing of the hybrid actuator were introduced. Output velocities have been measured in both loaded case and not loaded case and the blocking force also has been measured in external loaded case. The maximum velocity of the actuator is 53.3 mm/s, blocking force is 240.7 N and corresponding power output is 3.2 W.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.119-125
• /
• 1982

Using piston type extruder, barley flour was extruded at various processing conditions, The used variables were three shear rates (apparent shear rate 118, 534, $1169sec^{-1}$), four extrusion temperatures(90, 120, 150, $180^{\circ}C$) and three moisture contents (15, 25, 35%). The rheological properties and the extrudate quality were monitored in extrusion. Barley flour showed pseudoplastic behavior having average power law index 0.28 in used shear rate range. When viewed from general appearance, die swell, density, water uptake, rehydration swell and gelatinization degree of extrudate, $25{\sim}35%$ moisture and $120^{\circ}C$ temperature was suitable processing condition for noodle-like product, and 25% moisture and $150^{\circ}C$ temperature was good for snack or flake product. Moisture content of the extrudate can be pretty well estimated from energy balance at higher temperature and higher moisture content.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.44-52
• /
• 1987

For the favorable performance of a D.I. diesel engine, it is important to improve the mixture formation process and the ensuing early stage of combustion process. In the present paper, high speed photography was employed to investigate the effectiveness of a cavity digged in a piston crown for some more useful utilization of air. The cavity would function to improve mixing of fuel and air by the increase of turbulence of air and by the impingement of fuel spray on the cavity wall. The results obtained are summarized as follows: (1) From an aspect of thermal efficiency, it is effective to inject the spray tangentially to the cavity wall to enlarge the area of spray evaporation. (2) some deductions obtained from previous investigations using a hot air stream duct are supported by the present results. For example, it is effective for the quick development of flames throughout the combustion chamber to mix the evaporated fuel of main spray with the intermediates brought about by the early stage of combustion of the preceded auxiliary fuel spray.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.96-104
• /
• 2002

탄체가속기용 초기 발사장치로 사용 가능한 건국대 초고속 발사장치가 개발되었다. 이는 2단계 기포 (gas gun) 형태의 발사장치로 공기를 작동 기체로 사용하여 무게 22g의 탄체를 750m/sec로 가속할 수 있 는 성능을 보인다. 초고속 발사장치의 성능 특성을 알아보기 위하여, 구동부의 압축 특성과 작동 특성에 대한 성능 실험을 수행하였으며 실험으로부터 피스톤에 의한 압축 이득과 1,2차 구동부간에 발사장치의 성능을 최상으로 유지할 수 있는 값들이 존재함을 확인하였다. 초고속 비행체의 공력 특성 및 주위의 유동 해석에 응용 가능한 고속 탄환체에 대한 흐름의 가시화를 수행하여 수치적 계산 결과와 비교하였으며, 향후 고속유동의 물리적 현상 해석에 이용될 수 있음을 확인하였다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.338-348
• /
• 1999

Physical properties of mudbelt sediments in the southeastern inner shelf of Korea are studied from 14 cores. Physical properties, compressional wave velocity, and sediment texture for core sediments are analyzed. The major source of sediment in the study area is the Nakdong River. Fine-grained sediments from the river are transported northeastward by coastal circulation and the Tsushima Current, resulting in a gradual northeastward increase in porosity and a decrease in wet bulk density and velocity. The trend matches well with the bathymetry. The mean grain size appears to be the most important variable to determine the physical properties and velocity. The variations of physical properties with burial depth are dependent more strongly on sediment texture than compaction and/or consolidation. Correlations between the physical properties and the sediment texture show slight deviations from those of the continental terrace sediment in the North Pacific and inner shelf sediment in the South Sea of Korea. The velocity is higher than that of the North Pacific and the South Sea sediments between these areas. This is probably due to differences in sedimentary, environment and mineral compositions. The higher sediment velocity in the study area may also be attributed to the escape of gas from pore space which decreases void ratio.