• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.352-354
• /
• 2008

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.526-533
• /
• 2009

This study presents Mine Green Framework(M.G.F) which can protect the slope of rock and tailings. M.G.F method provides the fiber frame which helps the growth of the plant in the barren site like mined rock slope. M.G.F system consists of the polyester fiber mat, soil, seeds and anchors for the attachment. The optimum rate of filling materials was figured out by many germination tests in order to improve the effect of filling materials and the optimum rate of filling materials was applied in four test sites individually. High rooting rate over 70% was confirmed in all field tests. Especially the moisturizer was the most important component of filling materials and it could make the better condition for the plants.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.39-46
• /
• 2007

In this study, for the establishment of the performance evaluation methods and the quality control standards of durability recovery method, the quantitative exposure data by long term exposure test under the coast and normal atmosphere is accumulated and analyzed. Investigating and evaluating the result of exposure test during 30 months of exposure age under the coastal and normal atmosphere environment, carbonation depth and chloride-ion penetration depth very little penetrated than cover depth. It seems reasonable to conclude that main cause of Corrosion of reinforcing bar are chloride-ion and macro cell from the result of corrosion area and corrosion velocity. Therefore, it is considered to be applied as the fundamental data on the performance evaluation and quality control standards of repair material and method through continuous exposure test in the future.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.476-488
• /
• 1997

The purpose of this study was to figure out the suitable field standards for revegetation measures on cut-slopes in consideration of the environmental factors. The field survey was conducted from 1995 to 1996 on highway cut-slopes. The results obtained could be summarized as follows; The major revegetation measures surveyed were 5 major measures as a whole in descending order of seed-spraying measures, block-sod pitching measures, latticed block pitching measures, hydro-seeding measures with seed-fertilizer-soil materials, and several netting measures on highway cut-slopes. According to the analysis of the environmental factors, the plant coverage was affected several major environmental factors which were soil factors(soil hardness, soil texture, soil and rock condition), and site factors(slope gradient, slope length). From a viewpoint of optimum selection, the major 3 factors(soil factors, slope gradient factors, slope length factors) should be considered for selection of revegetation measures on highway cut-slopes.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.2
• /
• pp.21-30
• /
• 2005

The purpose of this study was to evaluate the effect of vegetation on the cutting slope applied by vegetation system in the whole land. The engineering characteristics of slopes were investigated using the face mapping and physical tests. From the statistical methods, a relationship between a geologic stratum and degree of covering was independent. Therefore, the afforestation of slope was affected more by condition of vegetation as direction and opening of joints, and a topsoil state than by conventional classification of layer. It was concluded that the adjustable vegetation on the slope considering condition of geometric shape of slope, joint data and spontaneous type could make useful early afforestation.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.55-61
• /
• 2010

Fire resistance is very essential for all buildings to save peoples who live within buildings or use and to protect the properties when the buildings are covered with fire. The fire resistance were evaluated by loading or nonloading fire tests which are known very expensive and require lots of time. That causes the lacks of research activities and there are only small cases of fire resistance. The purposes of this paper are to analyze the temperature analysis for various structural elements such as columns and beams those are can be applied to buildings and to suggest the resonable fire protective thickness of concrete slab according to the required fire resistance time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.747-754
• /
• 2017

The Concrete-Filled Tube (CFT) system was developed for its excellent structural performance, such as its good stiffness, stress and ductility, which is derived from the mechanical advantages of its composite structure. However, it is known that the flat type of reinforcing plates need stiffeners placed at a certain distance from each other to avoid buckling failure, which increases the cost accordingly. This paper investigates the contribution of the rib elements placed inside the steel tube for the purpose of increasing the bond strength between the steel and concrete and fire performance with no additional protection. The test results also demonstrate the effectiveness of the corrugated rib's shape against fire. The results of this study showed that the buckling prevention and fire resistance performance criteria were satisfied by the application of the inner surface attachment rib, due to the resulting increase in the strength of the CFT column. Therefore, it is considered that the CFT method using the corrugated rib structure reinforcement developed through this study satisfies the structural and fire resistance performance criteria without the need for a refractory coating. Future studies will be needed to make the process efficient and economical for factory production.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.151-157
• /
• 2008

It is difficult for existing beams to ensure the sufficient embedding depth due to constructional cause. Owing to these problems, currently FRP-Rod embedding repair method run parallel with a section increasing method in many case. In this study, anchor pin was adopted to solving the problems of the sliding of FRP-Rod and the unified behaviors of the repaired beam without increasing the section. In the experiments, split failure of covering concrete and slippage of the FRP-Rod were not occurred. it was confirmed that FRP-Rod shown the integrate behaviors with RC beam till the repaired beams destroyed.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.64-72
• /
• 2011

The concrete void slab structure with the existing mushroom slab, is the structure that maximizes the advantages, while minimizing the weakness with removing useless body force of the concrete part, located on the center of the slab cross-section, which does not need to support the structural weight. In this research, a fire test is performed to analyze how the blaze behave according to the thickness of slab cover, with the practical span length of concrete void slab for the slab length 7.5 m. With this heating test, we assumed the uniform-load-model considering fixed loads and live loads, and chose the standard fire test condition. We measured the temperature changes and the deflection character according to the depth from the heat exposure side, and assessed the resisting capability according to the standard KS F 2257-1. The result comes out with the EPS model can secure about 2 hour fire-resisting-capability with 50 mm of cover depth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.477-477
• /
• 2018

하천의 제방은 하천수의 범람을 방지하기 위하여 인공적으로 만든 구조물로서, 유수의 흐름을 일정하게 하고 자연재해에 대하여 제내지를 보고하기 위한 목적도 있다. 제방은 제내지와 제외지의 수위차로 인해 발생하는 파이핑, 제방의 월류, 사면의 탈락 등으로 파괴가 발생되고, 제방의 파괴는 제내지의 인명, 토지, 건물 등에 많은 피해가 발생한다. 이러한 제방의 파괴를 방지하기 위하여 제방 사면의 호안, 차수벽, 수제 등을 설치하고 있으며, 구조물 외에도 제방 응급복구를 위한 모래주머니, 비탈면 보호 시설 등을 이용한 피해방지에 대한 대책을 세우고 있다. 제방 구조물의 대부분은 콘크리트를 이용한 고강도 재료를 사용하여 설치되고 있으며, 재료의 환경성에 대한 문제점이 대두되어 왔다. 이에 따라 코코넛껍질을 이용한 사면 보호공, 고강도 식생매트를 이용한 사면 보호 등 친환경 재료를 이용한 사면보호 공법에 대한 연구들이 다양하게 진행되어 왔다. 본 연구에서는 미생물을 이용하여 사면을 보호하기 위한 블록 및 피복기법에 대한 연구를 진행하고 있으며, 다양한 환경성 및 무독성 검증도 병행중에 있다. 그 중 본 연구에서는 신소재와 황토, 모래, 석고를 다양한 비율로 조합하여 블록으로 활용하기 위한 일축압축 강도 실험을 수행하였으며, 신소재의 소류력 저항능력을 실험하기 위하여 안동 하천실증연구센터의 급경사 수로에 신소재를 피복한 시험구를 조성하고 5m/s 이상의 유속에서 저항능력 실험을 수행하였다. 본 연구에서는 본 실험 결과를 기반으로 하여 추후 다양한 친환경 재료를 이용한 조합을 통해 기존 콘크리트 블록에 준하는 강도를 발현할 수 있는 신소재 블록의 개발을 목표로 하고 있다.