• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.195-198
• /
• 2011

석유 및 천연가스 생산에 사용되는 고정식 해양플랜트에는 자켓 구조물이 가장 많이 사용되고 있다. 생산에 사용되는 자켓 구조물은 풍하중이나 파랑하중에 의해 인명의 피해 없이 변위 및 응력에 대해 안전해야 한다. 그러나 1940년대 후반부터 사용되어 온 자켓 구조물은 피로하중, 노후화로 인해 내구성에 문제가 생기고 있다. 본 논문에서는 자켓 구조물의 안전성을 검토하기 위해 모드형상을 이용하여 자켓 구조물의 손상 위치를 탐색하는 방법을 제시한다. 제시한 손상탐지기법의 효용성을 입증하기 위해 자켓 구조물의 유한요소모델에 임의의 손상을 모사하였다. 유한요소모델의 손상 전 모드형상과 손상 후 모드형상의 모달 변형에너지의 변화를 이용하여 손상 지수를 유도하고 유도한 손상지수를 사용하여 손상이 있는 부재와 손상이 없는 부재를 분류하였다. 연구 결과 손상지수가 '0'인 부재를 제외한 나머지 부재 모두 본 연구에서 제시한 손상탐지기법으로 손상 부재를 판별할 수 있었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.69-75
• /
• 2009

Recently developed automotive components are getting lighter providing a higher fuel efficiency and performance. Following the current trend, this study proposes a structural optimization method for the lower control arm installed at the front side of a Vehicle. Lightweight design of lower control arm can be achieved through design and material technology. In this research, the shape of lower control arm was determined by applying the optimization technology and aluminum was selected as a steel-substitute material. Strength performance is the most important design requirement in the structural design of a control arm. This study considers the static strength in the optimization process. For the optimum design, the durability analysis is performed to predict its fatigue life. In this study, the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint. Optimum designs are obtained by the in-house program, EXCEL-Kriging. Also, based on the optimum model obtained for the static strength, the optimization of Index of Fatigue Durability is carried out to get th optimum fatigue performance.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.270-275
• /
• 2008

Crack growth characteristics of elastomeric materials are an important factor determining the strength and durability. In this study, the fatigue crack growth characteristic of filled EPDM compounds with different reinforcing fillers, such as silica and carbon black, was investigated using a newly designed tester. Frequency and test temperature had significant effects on the fatigue crack growth. The crack growth rate decreased with increasing frequency and the rate increased with increasing temperature. A power law relationship between the tearing energy and crack growth was observed for filled EPDM compounds. The crack growth rate reduced with increasing filler contents. Silica filled EPDM showed a better fatigue resistance than carbon black filled EPDM. The crack growth rate of silica filled EPDM decreased up to 30 phr and increased again at 50 phr. The formation of microductile type pits was observed on the fatigue-failure surface of unfilled EPDM, and relatively coarse surface with randomly distributed tear lines was observed on the failure surface of silica filled EPDM.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.119-124
• /
• 2009

Stents are frequently used throughout the human body. They keep pathways open in vascular or nonvascular duct for a long time. Therefore its stability is very important factor. In recent years, aconsiderable amount of research has been carried out in order to estimate mechanical properties of the stent such as expansion pressure behavior, radial recoil and longitudinal recoil using FEM (Finite element analyses). However, published works on simulation of stent fatigue behavior using FEM are relatively rare. In this paper, a nonlinear finite-element methodwas employed to analyses the compression of a stent using external pressure and fatigue behavior. Finite element analyses for the stent system were performed using NASTRAN FX. In conclusion this paper shows how the stent is behaved in the body, and its fatigue behavior.