• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.17-27
• /
• 1989

용접에 이와 같이 발생하는 용접잔류응력과 변형은 용접구조물의 제작시 여러 가지 장해를 유발 할 뿐만 아니고 그 구조물의 사용중에 있어서도 파괴의 발생 또는 파괴의 전파에 직.간접적으로 기여하여 악영향을 끼치게 된다. 용접잔류응력은 용접구조물의 피로감도를 저하시키거나, 취성균 열 및 응력부식균열의 진전을 용이하게 하며 용접변형은 구조물의 외관을 해치거나 국부적으로 스트레인집중을 초래하여 이 역시 취성파괴의 원인으로 작용하여 구조물의 파괴사고를 유발할 위험성을 내포하고 있다. 따라서 용접변형과 잔류응력을 극도화하기 위한 대책은 용접기술자로 서 용접시공시 유의해야 할 가장 큰 사항의 하나라고 할 수 있다. 보고에서는 이러한 용접변형 과 잔류응력현상에 대해 그 발생기구를 금속학적 측면에서 고찰하고 그 경감대책에 대해서는 구 조물의 형상이나 종류에 따라 각각별개의 대책이 수립되어야 하나 여기서는 보편적인 경우에 한 해 해설하고저 한다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.31 no.5
• /
• pp.42-47
• /
• 2002

건물의 고도화 및 최첨단 공조시스템에 있어서 공기 조화기는 가장 핵심적인 장비로서 고장의 전도는 비교적 단순하나 요소기술의 적용, 운전, 유지관리에서 소홀하게 되 면 환경 업무의 저하와 생산성이 낮아지고 막대한 비용을 초래하기도 한다 . 고장은 설비시스템과 공조기의 사용기간이 길어짐에 따라 마모, 피로 등의 물리적 성능열화가 진행되며 이러한 물리적 열화가 최종적으로 나타나는 현상이 고장이다. 고장의 시간적 변화에는 초기고장, 우발고장, 마모고장으로 분류되며 초기고장은 시스템의 불안정에 따른 원인으로 시운전시에 자주 발생하고 정상적인 운전시에 발생되는 우발고장이 기간이 지나면 마모 고장기에 도달하게되며 이때는 부품의 한계수명과 마모등의 원인으로 고장률이 급격히 증가된다 따라서 본문에서는 공조시스템의 공기조차기의 팬과 펌프 기기의 고장원인을 살펴보고 이에 대한 고장을 신속하게 감시할 수 있는 방안을 일반적일 고찰을 통해 체계적이고 종합적인 대응방안을 소개하여 불필요한 보수비용의 발생과 생산성 저하를 방지하고 내구년수를 증가할 수 있는 신기술의 일부분을 소개하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.401-402
• /
• 2022

해상 상태의 변화는 어선에 탑승하고 있는 선원들의 피로도, 인지능력, 활동성 및 숙련도 변화 등과 같은 현상이 발생한다. 어선의 동요가 심해지면 특히, 멀미 증상이 발생하게 되며 개개인의 작업수행 능력이 급격히 떨어진다. 본 연구에서는 3톤급, 7톤급, 10톤급, 20톤급 어선을 대상으로 하여 파랑 중 운동 성능을 평가하여, 실해역 조건으로 어선의 선내 위치별 수직가속도 성분을 선체 운동 계산법을 통하여 계산하였다. 어선의 크기별 정박상태에서 수직가속도 스펙트럼을 사용한 멀미의 정도를 표시하였으며, MSI 계산은 입사파 방향 180도, 150도, 120도, 90도, 60도, 30도, 0도로 수행하였다. 그 결과 특정 주파수에서 입사파 방향에 따른 멀미의 가능성이 나타났다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.137-140
• /
• 2008

현대 사회는 육체적·정신적 활동을 많이 요구하게 되며 이러한 현상으로 스트레스의 증가와 이유없는 증후군의 발병이 점차 확대되고 있다. 특히 스트레스로 인한 피로의 누적으로 인체의 혈액 농도 및 순환에 영향을 끼치게 되며 이로 인해 신장의 상태가 악화될 수 있다. 따라서 신장의 이상 유무를 조기에 판단하여 적절한 조치를 취하는 것이 무엇보다 중요하다. 이를 위해 본 논문에서는 신장 질환을 앓고 있는 환자와 정상인을 대상으로 피실험자 집단군을 각각 구성하고 음성 정보의 형태학적 분석과 수치학적 분석을 실험으로 출력하고 결과값에 대해 비교·분석을 행하고자 한다. 최종적으로 실험을 통해 신장과 음성과의 관계를 정립하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.88-96
• /
• 2012

According to development of technology for media, observers try to watch the realities from images, as follows, 3D imaging has been extremely developed. 3D image gives depth in the image, observers feel in nature. Different image perception from left and right eyes make the 3D image. Anaglyph which is one of the ways to make an image of three dimensions is for obtaining an image of three dimensions by using color filter glasses. Anaglyph has a little amount of calculation and is easy to make, and it has a good point that anaglyph can be used in more wide field because it can create an image of three dimensions to the output of print like printed matter. However, the phenomenon of retinal rivalry can cause a feeling of fatigue because a difference of brightness of the left image and the right image happen. The way to reduce this problem is made by cutting down a difference of brightness. In the result, retinal rivalry can be reduced. We reduced a difference of the brightness of the left and the right image by utilizing the brightness and average of the original image to reduce retinal rivalry and we made better colors of anaglyph by using the way that we keep the hue caused by a change of brightness and supplement saturation about color distortion which is created at that time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.1-8
• /
• 2009

Stay cable is easily exposed to vibration induced rainy wind effects. There are some problems for not only unexpected vibration but also well-known vibration. An outbreak of displacement by the said effects brings damages such as over-tension of cables and barriers, fatigue of anchorages and dampers, and additional shear force variation of stiffening girders. This study suggests analytic methodology for dynamic tension variation of cables and shear force variation of stiffening girders. Additionally this study announces with dynamic problems for cable stayed bridge briefly. To realize this subject, we divide restoring force into chord component and normal component and then make up the differential equations which can satisfy physical phenomenon for each component. Finally we apply adequate functions such as sinusoidal and parabola in order to reduce these differential equations. Therefore we can meet with good results through a series of above process. As a remarkable result, CIP recommendations (2002) give inadequate solution with over 10% error. However it gives very good solution if parts of our study are reflected at the said recommendations. The fact means that CIP recommendations (2002) well-known as international standard of stay cables are not even concern about this subject yet. For verification of this study, F.E. analysis using E.C.C. with external forces was fulfilled, and the accuracy and conciseness of this study were shown.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.53-62
• /
• 1992

Material can be degraded by using it for a long service under the high temperature and pressure circumstances, Therefore, material degradation can affect the strength of mechanical structures. At present, the life prediction of the degraded structures is considered as an important technical problem. In this paper, the degraded 21/4Cr-lMo steel is the material used for about 10 years around 400.deg. C in an oil refinery plant. The recovered one was prepared out of the above degraded steel by heat treatment for one hour at 650.deg. C. The degradation effect was investigated through the tension test, Hardness test and Charpy impact test. On the smooth surface material, the fatigue crack initiation, growth and coalescence stages of the distributed small cracks were investigated with photographs, and the crack length and density were measured. The measuring results were analyzed by quantative and statistical methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.177-183
• /
• 2008

The typical heat-resisting rotor steels such as 2.25CrMo, 9CrMo and 12CrW steel were experimentally studied in order to understand their materials degradation under high temperature and pressure during the long-term service, and then use the basic studies for the structural health monitoring. In order to monitor the materials degradation, it was conducted by the isothermal aging for 2.25CrMo steel, creep-fatigue for 9CrMo steel and creep for 12Cr steel with the incremental step test. The ultrasonic wave properties, electrical resistivity and coercivity were interpreted in relation to microstructural changes at each material and showed strong sensitivity to the specific microstructural evolution.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2017

While a satellite is carried into orbit by a launch vehicle, it is exposed to the severe launch environment with random vibrations and shock. Accordingly, these vibration sources affect electronic equipment, particularly the printed circuit board (PCB) in the satellite. When the launch load impacts the PCB, it causes negative behavior. This causes perpendicular bending around the boundary of fixation points that finally leads to the failure of solder joints, lead wires, and PCB cracks. To overcome these issues, the electronic equipment design must meet reliability requirements. In this paper, Steinberg's method is used to derive allowable and maximum deflection to verify design from a life perspective concerning the control board of the Antenna Pointing Driver (APD) mounted on KOMPSAT-3.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.69-80
• /
• 1998

This research was designed to investigate how the exercise program affects paraplegic standing and walking employing functional electrical stimulation(FES). Emphasis was also given to fatigue of major lower extremity muscles induced by different types of electrical stimulation. We applied continuous and intermittent rectangular pulse trains to quadriceps of 10 normal subjects and 4 complete paraplegic patients. The frequencies were 20Hz and 80Hz, and the knee angle was fixed at 90$^{\circ}$and 150$^{\circ}$to investigate how muscle fatigue is related to muscle length. The knee extensor torque was measured and monitored. We have been training quadriceps and gastrocnemius of a male paraplegic patient by means of electrical stimulation for the past two year. FES standing was initiated when the knee extensors became strong enough to support the body weight, and then the patient started FES walking utilizing parallel bars and a walker. We used an 8-channel constant-voltage stimulator and surface electrodes. The experimental results indicated that paralyzed muscles fatigued rapidly around the optimal length contrary to normal muscles and confirmed that low frequency and intermittent stimulation delayed fatigue. Our exercise program increased muscle force by approximately 10 folds and decreased the fatigue index to half of the initial value. In addition, the exercise enabled the patient to voluntarily lift each leg up to 10cm, which was of great help to the swing phase of FES walking. Both muscle force and resistance to fatigue were significantly enhanced right after the exercise was applied every day instead of 6 days a week. Up to date, the patient can walk for more than two and half minutes at 10m/min while controlling the on/off time of the stimulator by pushing the toggle switch attached to the walker handle.