• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.3-11
• /
• 1996

To investigate the effect of fatigue crack growth due to the surface residual stress, it is measured the residual stress distribution by x-ray diffraction at the crack tip each constant crack growth in the notch specimens, and quantitively assessed the effect of crack closure caused to the distribution of compressive stress at the crack tip from evaluating crack openning stress using the finite element analysis. It is concluded that the degree of the residual stress distribution at the crack tip is decreased with increasing the crack length. From the fact that it is similar to the crack openning stress ratio, it is found that the compressive residual stress distribution and size is related to the crack closure effect and surface residual stress field with propagating crack in the notch specimens depends on the stress intensity factor range at the crack tip.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.394-399
• /
• 2002

국민소득의 증대와 함께 소비자의 고품질 농축산물에 대한 수요와 관심이 날로 증가하고 있다 이에 따라 안전하며 고품질인 농축산물을 소비자에게 공급하기 위하여 안전한 농축산물의 생산, 신선도 유지를 위한 유통구조의 개혁, 품질 및 안전성 평가기술개발을 위한 노력이 보다 더 요구되고 있다. 소비자가 믿고 구매하기 위해서는 농축산물에 대한 품질보증이 필수적이며 이를 위해서는 신속하고 정확한 품질 및 유해물질의 판정기술 개발이 필요하다. 많은 농축산물에 있어서 주요 품질인자인 숙도 및 신선도의 변화는 휘발성 화학물질로 이루어진 냄새의 변화로 나타나므로 이를 측정하여 품질 및 안전성을 간접적으로 판정할 수 있다 기존의 냄새에 의한 품질 판정은 판별전문가에 의한 관능평가법 또는 GC(Gas Chromatography)나 GC/MS(Gas chromatograph mass spectrometer)에 의하여 주로 이루어져 왔다. 하지만, 관능평가법의 경우 판별전문가의 개인적인 차이, 피로, 건강상태 등에 따라 판정의 객관성이 떨어질 우려가 있고, GC나 GC/MS를 이용할 경우 냄새분석에 많은 시간과 노력이 소요되는 문제점이 있다. (중략)

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.91-96
• /
• 2008

The governing parameters affecting the fatigue properties have been investigated experimentally in the high carbon steel wires with 0.94 wt.%C. In order to find the crucial factors, the advanced analysis techniques such as optical 3-D profiler, focused ion beam(FIB) and transmission electron microscope(TEM) were used. The two-type steel wires with different drawing strain were fabricated. The fatigue properties were measured by hunter rotating beam tester, specially designed for thin-sized steel wires. It was found that the fatigue properties of the steel wires with high drawing strain was higher than that with other wires because of low residual stress and high adhesion condition of brass coating layer.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.124-127
• /
• 2007

In this study, we focused on investigation of governing parameters affected on the fatigue properties in the hyper-eutectoid steel wires used for TBR tires. Steel wires are fabricated under different drawing strain from 3.36 to 3.80. Their diameters are 0.21 mm and 0.185mm, respectively. The fatigue properties was measured by hunter rotating beam tester, specially designed thin-sized steel wires. The results showed that the fatigue properites of steel wire, marked as A-1, were greater than the others, due to the low value of residual stress. In order to elucidate the variations of fatigue properties, the microstructure, surface defect and residual stress were observed and measured by useful analysis technique, such as TEM, 3D profiler and FIB.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.476-479
• /
• 2011

티타늄 합금은 높은 내부식성, 우수한 피로 수명과 무게비에 비해 높은 강도를 가진다는 우수성으로 인해 항공기 부품과 화학 공업 분야등에 다양하게 사용되고 있다. 이번 연구에서는 Ti-3Al-2.5V 합금 TIG 용접부에 대하여 용접부 인성과 기계적 성질에 영향을 주는 가장 중요한 인자인 용접 입열에 대한 영향을 평가하고자 하였다. 이에 입열조건에 대한 용접부에 대한 강도, 충격 인성과 노치 인성을 평가하였으며 적정 입열 조건에서 강도와 인성이 우수한 용접부를 얻을 수 있다는 것을 확인하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.52-57
• /
• 1997

국제 열 핵융합로 (International Thermonuclear Experimental Reactor) 의 중앙 솔레노이드(solenoid) 초전도 전자석의 피복관 (conduit) 으로서 가장 유력한 후보 재료인 니켈-철 기저 초합금에 대한 개선된 파괴역학적 거동 예측 모형을 개발하기 위하여 피로균열 성장과 파괴 인성 치의 측정이 사용되었다. 유한 요소법을 사용하는 상용 구조해석 코드인 ANSYS 제 5.2판에 의해 초전도 전자석 피복관 재료에 대한 탄소성 파괴역학적 거동을 살펴보았다. 정확한 파괴 기준을 개발하기 위하여 삼차원 J 적분 인자에 의한 결과를 사용하였다. 얇은 피복관재의 경우에 절대온도 4도에서의 적합한 파괴 인성치는 실제 단면효과를 고려한 표면균열 인장시험 결과를 토대로 J 적분으로 도출한 150 MPaㆍm$^{1}$2/ 로 제시되었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.216-229
• /
• 2024

Pipeline steels for hydrogen transmission may cause hydrogen embrittlement due to absorption and diffusion of hydrogen through metals. Hydrogen pipes exhibited similar mechanical properties to atmospheric conditions in terms of tensile and yield strength in a hydrogen atmosphere. This paper aims to provide relevant information regarding hydrogen embrittlement in hydrogen transmission pipeline.

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.948-954
• /
• 2010

Exercise can favorably influence brain plasticity by facilitating neurogeneration, neuroadaptivity, and neuroprotection. Aerobic exercise has been reported to change brain nerve growth factors (growth hormone, insulin like factor-1, estrogen and serotonin). The purpose of this study was to demonstrate the effects of aerobic exercise for 12 weeks on brain nerve growth factors in girls. Fourteen female participants in elementary school grades 1 through 3 were randomly allocated to the exercise group (EG, n=6) and control group (CG, n=8). The EG participated in 60 minutes of modified ballet exercise as aerobic training three days a week for 12 weeks. Based on comparison between groups by two-way ANOVA with repeated measures, aerobic exercise program participants experienced decreased weight (p<0.01), BMI (p<0.01), fat mass (p<0.001), fat percent (p<0.001) and increased LBM (lean body mass) percent (p<0.001). In addition, we detected that aerobic exercise decreased the level of serotonin (p<0.05) and increased the level of GH (p<0.05) and IGF-1 (p<0.05). These findings suggest that aerobic exercise programs can be an efficient intervention to change body composition, alleviate central fatigue, improve brain function, and induce brain cell proliferation in girls.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.11-17
• /
• 2012

This research describes how to predict a model of the tensile strain related to the fatigue cracking performance of several asphalt concrete structures through design of experiments(e.g., Response Surface Methodology) and harmony search(HS) algorithm. The axisymmetric analysis program of finite element method, which is the KICTPAVE, was used to determine the strain level at the interface layer between asphalt layer and lean concrete layer. Once the training database set of various strain levels was constructed under the several condition of layer stiffnesses and thicknesses in the asphalt concrete structures, the data set was trained through the HS algorithm in order to determine the regression coefficients defined based on a response surface methodology. Furthermore, the testing set, which was not used for the training procedure of HS algorithm, was also constructed in order to evaluate whether the regression coefficients of a prediction model can be appropriately applied for other cases in asphalt concrete structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2010

In this paper, a method to predict the fatigue life of an axle drive shaft by the calibrated accelerated life test (CALT) method is proposed. The CALT method is very effective for predicting lifetimes, significantly reducing test time, and quantifying reliability. The fatigue test is performed by considering two high stress and one low stress levels, and the lifetime at the normal stress level is predicted by extrapolation. In addition, in this study, the major reliability parameters such as the lifetime, accelerated power index, shape parameter, and scale parameter are determined by conducting various experiments. The lifetime prediction of the axle drive shaft is verified by comparing the experimental results with load spectrum data. The results confirm that the CALT method is effective for lifetime prediction and requires a short test time.